Coupler Lock Available to Fit UFP A-60 Coupler

Question

Question:

Will this lock fit a Trailer Buddy UFP A-60 Hydraulic Brake Actuator?

asked by: Joe

0

Expert Reply:

Yes, the Trailer Coupler Lock # e98887 that you referenced will work with a UFP A-60 coupler lock. The product picture for this lock shows it being used on an A-60.

I attached a review video for you to check out as well.

expert reply by: Jameson C

0

Answer 1

I have another option for you, but we do not offer a J bolt spare tire carrier for a trailer at this time. Instead I recommend taking a look at the CE Smith Spare Tire Carrier - Locking - Steel - 4-Lug and 5-Lug Wheels - 8-3/4" #CE27202…

view full answer...

Answer 2

You can get those locks all keyed alike, but there isn't a set with all three together. Instead, what you'd do is go to the product pages of each, and on those product pages there is a drop-down box that says "Keyed…

view full answer...

Answer 3

The Trailer Coupler Lock #e98887 will work with a UFP A-60 coupler like your Dexter A-60 #DX56FR. The product picture for this lock shows it being used on an A-60.

view full answer...

Answer 4

Our etrailer.com coupler lock #e98887 is designed to work on a coupler width up to 2-1/2 inches. Since that is what you have on your coupler, this lock will fit and it will be a nice snug fit, which is by design. For a second option I recommend the…

view full answer...

Answer 5

Hi Ed, If I'm understanding you correctly your trailer's frame is 3" wide and the coupler needs to have a 2" ball. If so the Demco Channel Tongue Trailer Coupler #DM15000-52 you were looking at would be a compatible…

view full answer...

Answer 6

I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer…

view full answer...

Answer 7

Hi Ed, Yes, the pin #C87ER included with the Curt QuickPin No-Latch Trailer Coupler for 2" Ball #C82CR is 1/2" diameter so you could use a locking hitch pin lock like the Curt #C23517. This locking hitch pin is 1/2" in…

view full answer...

Answer 8

Demco unfortunately doesn't have an EZ-latch coupler for a 2" wide channel so you're left with three options: etrailer #CT-3001-Z (3-1/16 bolt hole spacing) Curt #C82CR (3" bolt hole spacing) Dutton-Lainson #DL13835…

view full answer...

Answer 9

You mentioned A-frame, though it looks like the Shelby 5135 is a straight tongue coupler, so I'll give options for both. Since you don't want a trigger latch you'll need to upgrade to a 10k coupler but that won't be an…

view full answer...

Answer 10

The #DX39FR Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball is what you need. This is the replacement inner member for Dexter DX7.5L and Legacy UFP Brake Actuators like your UFP A-60 so it would be exactly…

view full answer...

Answer 11

The best wheels for saltwater are going to be aluminum wheels because they do not rust. I would not recommend using a steel wheel like the #AM20315 you were looking at. It might hold up if you meticulously rinsed it with fresh water and made sure…

view full answer...

Answer 12

Basically the three part numbers you mentioned give you the same lock but the different part numbers allow you different options for the key. If you order the part #FA86-0015-312 you get the key number 312, or the part #FA86-0015-317 you get the…

view full answer...

Coupler Lock Available to Fit UFP A-60 Coupler

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching