Installation of Exhaust Hanger Bracket on a 2006 Lincoln Town Car with Dual Exhaust

Question

Question:

2006 town car signature with true dual exhaust. What is the solution to the exhaust hanger location and therefore interference with the hitch support?

asked by: Vince Z

0

Expert Reply:

I can help you with your hanger bracket on your 2006 Lincoln Town Car with dual exhaust when installing the Curt hitch # 13707.

Since your model has the dual exhaust you will need to relocate the hanger bracket. In the directions, which I've linked to this page for you, it shows how to adjust the rubber exhaust mount for the hanger. With parts separated rotate bumper hanger and reattach to hanger bracket, I've linked the image for your convenience.

There are a few more important notes mentioned for your 2006 Lincoln Town car in the directions. The external dress panel beneath vehicle must be removed and you will want to install spacers between vehicle frame and hitch to level the hitch assembly. Your 2006 Lincoln Town car requires the use of two spacer blocks at mounting locations near the bumper and one spacer block at the forward mounting locations.

expert reply by: Jackie C

0

click to enlarge

Answer 1

To install the Curt Hitch part #13707 in your 2010 Lincoln Town Car you will need to do a little bit of drilling. You will need to drill 4 holes into the frame of the vehicle. Don't worry though, this is a pretty standard hitch install and it…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Installation of Exhaust Hanger Bracket on a 2006 Lincoln Town Car with Dual Exhaust

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching