Availability of Surge Brake Actuator with Lunette Ring and Parking Brake Availability

Question

Question:

We are looking for lunette eye surge brakes trailer overrun brakes with handbrake option. Required quantity would be 56nos-60nos., please work on same and get back to us soon.

asked by: Pradhyun

0

Expert Reply:

Sounds like you are looking for a surge brake actuator with a lunette ring for use with a pintle hitch like the part # T1891100.

For a hand operated parking brake you would want the part # T2385200. This will only work on hydraulic drums that were designed for parking brakes like the part # T2351300.

expert reply by: Jameson C

0

Answer 1

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 2

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…

view full answer...

Answer 5

Are you basically asking how much length would this coupler add to the tongue of your trailer?

view full answer...

Answer 6

While we don't have replacement parts for a Model 70LP actuator, we do have a great replacement for it. Like the 70LP, these actuators are a fit for a 2" hitch ball, but they just have a slightly larger capacity at 7,500 lbs. You didn't…

view full answer...

Answer 7

Yes, I spoke with my contact at Kodiak and I sent him the picture you submitted to us and told him what axle setup you have and he said that the Kodiak Disc Brake Kit part #K2HR12A11-120DW will fit and work well. It will fit with 16 inch wheels on an…

view full answer...

Answer 8

The best solution we have is the Kodiak Disc Brake Kit - 11.35" Rotor - #120 Spindle - 12K - ALKO #K2HR12A11-120DW which is designed for your 12k ALKO brake setup. The Dexter rotor you mentioned would not fit and we do not have any rotors by…

view full answer...

Answer 9

For a disc brake actuator like the Demco #8608611 to work with drum brakes you need to replace the master cylinder otherwise the pressure will blowout the wheel cylinders on your drum brake assemblies. If you were to have this specific actuator then…

view full answer...

Answer 10

We do have the Titan master cylinder replacement part #DX66FR which has the number 23744 stamped on the side of it. See attached picture. A lock out solenoid would attach directly to the back of the master cylinder without an adapter. If you are in…

view full answer...

Answer 11

The Titan Brake Actuator #T63FR doesn't have a specific manual. There are just parts of a catalog that refer to it. I've attached those photos to assist. This product is the drum brake actuator for the Aero 7500 and has a manual lockout for…

view full answer...

Answer 12

We've checked the part number you gave us before and the replacement for it is the part #T4750820 which is for disc brakes. This one does come with a reverse lock out solenoid. If it has rust all over it I'd consider just replacing the entire…

view full answer...