Dimensions of Roadmaster # RM-061 Quiet Hitch Anti-Rattle Device

Question

Question:

What is the diameter of the steel bar that the u bolt nuts get tightened on?

asked by: Greg P

0

Expert Reply:

The bar is 7/8 inches in diameter, or 11/16 at the ends. I've edited a photo for you showing the different dimensions of the Roadmaster # RM-061 Quiet Hitch.

expert reply by: Mike L

0

click to enlarge

Answer 1

The highest rated adjustable ball mount we offer that is designed to fit a 2-1/2 inch hitch like the Class V hitch of your 2016 Ram 2500 is the Curt Ball Mount part #C45902 which has a 20k capacity when you use the 2-5/16 inch hitch ball and a 10k…

view full answer...

Answer 2

If you are experiencing chucking when towing a bumper pull trailer you most likely having movement between the hitch and ball mount as that would be the most likely area that would create that type of noise and movement. An anti-rattle device would…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

For some reason Toyota isn't very forthcoming with how to figure out if you have the tow package or not. From my understanding all of the V6 models of the 2019 Toyota Highlander have the tow package but it isn't specified as to what else…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Dimensions of Roadmaster # RM-061 Quiet Hitch Anti-Rattle Device

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching