Can an Older Car Trailer Have New Kodiak Disc Brakes Installed
Question:
I have an old car trailer. Im having trouble locating disc brake pads/caliper/rotors for it. I wonder if I can upgrade it with the Kodiac brake kit. I dont think its a common set up, but maybe with some mods I can make it work. If you send me an email address I can send pictures. I already installed a new surge actuator had to modify the tongue for that too. Hope you can help as Im already committed to making this thing work.
asked by: Joe H
Expert Reply:
As long as there is a brake mounting flange on the spindle of your trailer axle there should be a way to get new disc brakes on the trailer.
Basically you would need to first determine what spindle you have on your trailer so that we can figure out what hub/rotors are going to fit. If you check out the help article I attached you will see a guide that will walk you through the entire process.
The part # K2R35DS that you referenced is a slip on kit that will fit over idler hubs on a trailer that are 5 on 4-1/2 inch bolt pattern. If you have idler hubs with this bolt pattern and brake mounting flanges this kit should work just fine.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and Stainless Steel - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Search Results: bk2~100
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Can a Brake Flange Be Added To a Trailer Axle With Idler Hubs To Add Electric Brakes
- Q&A: 3,500 lb Trailer Disc Brake Hub & Rotor With 5 Bolts That Fits 14 Inch Wheels
- Q&A: How Much Clearance Is Required For the Kodiak Disc Brake Kit # KOD59FR?
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Mounting Bolts and Hardware for 10" Brake Assemblies
- Shop: Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 2-3/4" Pilot Hole
- Shop: Trailer Hitch
- Search Results: 44649
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM72VR
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Shop: Fifth Wheel Hitch
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Video: Review of Dexter Axle Brake Actuator - Surge Brake Actuator with Reverse Lockout - DX56FR
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Search Results: dust cap
- Shop: Brake Controller
- Video: Aries AdvantEdge Headache Rack Review