4-Way Trailer Connector for a 2015 Nissan Pathfinder

Question

Question:

Google search pulls this up. Will this work for a 2015 Pathfinder. It looks like it will fit the adapter behind the bumper.

asked by: John

0

Expert Reply:

Wiring harness # 118263 is only part of what you would need for your 2015 Nissan Pathfinder. There is also a jumper harness and relays that will be needed to make the harness fully functional and is not included with # 118263 since it is for models that have the factory tow pacakge. To get everything needed I recommend # 118670. It comes with the jumper harness, relays, and the 4-Way harness.

expert reply by: Michael H

0

Answer 1

The Connectors on the Hopkins Plug-In Simple Vehicle Wiring Harness #HM43534 do appear to be similar but they do have small differences. So this connector will not properly fit your 2019 Nissan Pathfinder. The T-One Vehicle Wiring Harness for Factory…

view full answer...

Answer 2

It will not as the part number you mentioned is just a replacement part for a harness for other Nissan vehicles. For a 4-way for your 2016 Nissan Pathfinder that does include the relays to activate the tow package you'd need a harness from Curt:…

view full answer...

Answer 3

You'll need to start with the 7-way kit part #118281 on your 2010 Nissan Pathfinder but then would need to just swap out the 7-way with the part #30955 and you'd have both styles of connectors.

view full answer...

Answer 4

Since you have cleaned the connection where the harness plugs in under the vehicle and that made some of the functions start working then that leads me to believe that there is additional dirt and corrosion in that area causing it not to work…

view full answer...

Answer 5

It does sound like you have a blown fuse or bad relay in your vehicle. You can find the fuse panel legend in your owner's manual or ask your dealership where the trailer towing fuse is located. There may be separate fuses used for trailer…

view full answer...

Answer 6

If the running light relay is present in the in-cab fuse panel on your 2012 Nissan Frontier and you are still not getting power on the brown wire of wiring harness #118263 then it could be the fuse associated with that relay. The fuse locations and…

view full answer...

Answer 7

Sounds like there are some blown trailer wiring fuses/relays under the hood of your 2015 Nissan Xterra that are in need of replacing. Check all of the fuse boxes under the hood of your vehicle for the trailer wiring circuits and replace as needed.…

view full answer...

Answer 8

If the window sticker of the 2011 Nissan Frontier that you are looking at says that it has the factory trailer wiring you should already have the Replacement OEM Tow Package Wiring Harness, part #118263, that you referenced. This product is for…

view full answer...

Answer 9

The 9:00 position of your 7-way should have the left turn/brake signal and the 3:00 position should have the right turn/brake signal when a 7-way is wired up in the traditional layout. I attached a picture that shows how a 7-way typically get wired.…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...