Front Mount Trailer Hitch Receiver for a 2012 Jayco Greyhawk Class C on Ford E-450 Chassis

Question

Question:

I have a 2012 Jayco Greyhawk class C motorhome on an E450 Ford chassis. Is there a front hitch available ? Thanks

asked by: Doug

0

Expert Reply:

Yes! There is a front mount hitch for your Class C RV built on the Ford E-450 van chassis. You can use Draw-Tite front mount receiver # 65053. I have included a link to the installation details for you.

expert reply by: Michael H

0

Answer 1

Yes, the B&W Pintle Hook Mounting Plate #BWPMHD14002 can be mounted in either the rise or drop position. If you also need a pintle hitch the Curt #C48200 is rated for up to 16,000 pounds when using the pintle hitch. This also included a…

view full answer...

Answer 2

I would be happy to help you upgrade your 2022 Highlander's wiring harness so you can control your trailer's brakes. You're going to need the universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat -…

view full answer...

Answer 3

You will have plenty of options for cargo boxes that will fit on the Rhino Rack HD bars #RB1800B-2. As a matter of fact you could fit virtually any roof box that we carry. Most cargo boxes are made with universally designed clamps, so they will fit…

view full answer...

Answer 4

The tires in your size that we offer have varying pressure ratings depending on their load capacity. For example, if you look at the tires in your size shown on the link I have included you will see that those rated for Load range E, such as…

view full answer...

Answer 5

We haven't had a chance to install the VanTred Custom Floor Mat for Cargo Vans #VTRF92 on a vehicle yet, like your 2004 Ford E-350 Van, but the installation is actually really simple. You will want to start off by laying the floor mat out so it…

view full answer...

Answer 6

The BedRug Cargo Van Mat #VRF92X is a fit for your 2006 Ford E-350 extended cargo van and should fit properly into the interior of your van without trimming or adjustments. I have included a link to a video review of the VanRug Custom Floor Mat for…

view full answer...

Answer 7

We don't have specific dimensions for the #VRF92 but to answer you real question-it covers the entire floor from behind the front seats to under the cargo door's plastic shroud. I attached a picture that shows how it covers the floor of a…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Answer 12

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

view full answer...

Front Mount Trailer Hitch Receiver for a 2012 Jayco Greyhawk Class C on Ford E-450 Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching