How To Determine Which Replacement Hubs Will Work With 2004 Yacht Club Trailer
Question:
Hello, Im looking to replace the hubs on my 2004 Yacht Club trailer. The model of the trailer is SMA105D. Is there any way to determine which hubs I will need. Thanks,
asked by: Dan
Expert Reply:
To be able to determine what hubs will work with your 2004 Yacht Club trailer, we will need the part numbers of the inner and outer bearings and the seal number.
If you cannot find the part number on the bearings and seal you can use a digital or dial caliper and measure the spindle.
You will also need to know the wheel bolt pattern for the wheels you have so that you are sure the wheels will fit your new hubs. I have attached a helpful article that explains how you can determine the wheel bolt pattern of your wheels.
One you get those numbers or measurements, let me know and I can make some recommendations that will work for you.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Search Results: 5 lug trailer hub
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: 25580
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: axle
- Search Results: bearing buddy
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Gooseneck Hitch
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: leaf spring
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: Suspension Enhancement
- Search Results: l44649
on Trailer Hubs and Drums
