Will Curt Trailer Hitch, # 14001 Fit on a 1989 Dodge D250 Pickup With a Cummins Turbo Diesel

Question

Question:

Will this hitch fit the 89 Dodge 250 pickup w/Cummins turbo diesel engine?

asked by: Art C

0

Expert Reply:

The Curt Trailer Hitch, # 14001, will fit your 1989 Dodge D250 pickup as long as it does not have a roll pan bumper. I have included a link to a video installation on a similar truck below. I also added a link to the installation instructions.

I also recommend the Forged Ball Mount, # 40331, and ball # A-90 (2 inch diameter), or # 19286 (2-5/16 inch diameter).

The wiring for your truck is the Curt Vehicle Wiring Harness with 4 Pole Trailer Connector, # C55317. Installation is easy. The harness plugs in line with your taillight wiring under the truck. I have included a link to the installation details below.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Generally speaking wheel mount only bike racks are preferred. Especially for people with carbon fiber bike frames since frame mounts aren't recommended at all with them otherwise damage could occur. For other frame designs people still prefer…

view full answer...

Answer 8

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Will Curt Trailer Hitch, # 14001 Fit on a 1989 Dodge D250 Pickup With a Cummins Turbo Diesel

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching