Recommended Anti-Rattle Devices for Towing a Boat Trailer

Question

Question:

which anti-rattle device is recommended for towing a boat trailer?

asked by: harvey

0

Expert Reply:

There are several anti-rattle devices that would be good to use when towing a boat trailer. The construction of your ball mount will determine the best choice for your application.

If your ball mount is hollow, and you have a 2 inch receiver hitch, then I would recommend the
Softride Anti-Rattle Device and Lock for 2 inch Trailer Hitches, item # SR25219. This anti rattle device also includes a lock to secure the ball mount to the vehicle.

If your ball mount is solid, and you have a 2 inch receiver hitch, I would recommend the RoadMaster Quiet Hitch Anti-Rattle Device for 2 inch Trailer Hitches, item # RM-061. This is slid onto the ball mount before installation into the hitch and then is tightened to the hitch eliminating rattle. Also see the Malone # MPG908.
This wedge device installs around the hitch pin and the wedge is tightened between the hitch and the ball mount.

expert reply by: Robert G

0

Answer 1

The Malone Anti-Rattle HitchLock System part #MPG908 will help hold the shank of the weight distribution system inside the receiver tube more securely. Therefore, you won't have as much side to side or front to back movement with the shank…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

To keep your back end from squatting, I recommend the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension item #CSS-1094R. These insert into your rear springs and keep your suspension from being pushed down by the weight of your…

view full answer...

Answer 5

Hello Craig. I do have a solution for you, but the Flint Hill Goods Wheelchair Carrier #FHG99ZR is not recommended for use behind RVs, campers, or trailers. The ride on the back of a 5th wheel or RV is a lot more rough than on the back of a car or…

view full answer...

Answer 6

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 7

That is a keen observation and a good question. I actually had the chance to assist with assembly of one of the Flint Hill Goods 30" x 50" Wheelchair Carriers #FHG99ZR not too long ago. The main bolt for the shank is indeed quite large, so…

view full answer...

Answer 8

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 9

You can expect the installation of the #C59236 in the 2023 Palisade video to be almost identical to your 2022 Hyundai Tucson. I'm not sure if the tail light style varies so removal may be a little different but the rest will be the same.

view full answer...

Answer 10

What you need is the Roadmaster Brake Lite Relay Kit part #RM-88400. This will prevent your brake pedal brake light activation from overriding the turn signals like you are experiencing.

view full answer...

Recommended Anti-Rattle Devices for Towing a Boat Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching