4-Way Adapter Recommendation for a 2004 Jeep Wrangler

Question

Question:

I have a 2004 Jeep unlimited that has a factory installed wiring harness. I believe it is a seven pin square connector. I need an adapter to 4 pin, do you make these?

asked by: Bill P

0

Expert Reply:

A square 7-way is not a standard style of trailer connector. It could be possible that you have a round, blade-style 7-way and then all you would need to convert it to a 4-way would be a # 47345.

Or you could just install a new 4-way with the part # 118409 and bypass the 7-way all together.

expert reply by: Jameson C

0

Answer 1

We can guarantee that the Tekonsha Trailer Wiring Harness part #118409 is a fit for your 2005 Jeep Wrangler Unlimited. I attached an install video that shows this harness installed on a 2005 Wrangler just like yours.

view full answer...

Answer 2

The Toyota 4 Runner had a knock-out plug already present and then we simply added the Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob #331-TPSI-001 which measures 1-1/4 by 1 inch. There is also the option of using…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 7

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 8

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way…

view full answer...

Answer 9

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 10

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 12

Yes, when installing the knob for the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you will want to remove any extra material behind the insert. I am happy the video was able to help you out. I have linked a couple of pictures from the…

view full answer...