Troubleshooting Tekonsha Voyager That's Locking Up Trailer Brakes
Question:
I have a 2004 Toyota 4Runner and a 23 ft hybrid camper. The brake controller installed is a Tekonsha voyager. I have had issues with my brakes locking up when I use them, but this didnt happen until after I had driven the camper over 1,000 miles. Ive spent several hundred dollars on supposed fixes including replacing the brake magnets, the controller and all the wiring, but I still have the problem. The last serviceman came to the conclusion that its the controller and that I should get an upgraded one that automatically adjusts. I have an option to get either a Tekonsha Prodigy P2 or a P3. The P3 may be a couple years old, the model number is 90195. I had read about the upgraded accelerometer in the newer P3 and was wondering if the model number changed when it was upgraded. Im a little apprehensive about spending a lot of money on a new controller, if that may not even fix the problem. Do you have any ideas about that?
asked by: Linda B
Helpful Expert Reply:
Assuming that your trailer brakes are properly adjusted, I'd be leaning toward the brake controller as being the problem.
The Voyager was a pretty decent controller for its time, but technology has pretty much passed it by. The controller uses an internal pendulum to sense how quickly the vehicle is coming to a stop, instead of the solid-state accelerometer used in modern controllers like the Primus # TK90160, Prodigy P2 # 90885 or P3 # 90195. The Tekonsha Primus, Prodigy P2 or P3 all self-level, while the Voyager needs to be manually leveled. If the controller isn't correctly leveled or if the leveling mechanism was faulty, It would indeed affect the operation of the controller.
How do the brakes operate with the controller's manual lever? If you can move the lever over very slowly and feel the trailer braking progressively harder, instead of locking up immediately, it would mean that the leveling adjustment for the pendulum is in need of adjustment or that portion of the controller is faulty.
The P2 or P3 would be much more reliable, not to mention easier to use. According to Tekonsha, the P3 has had the same part number since its original release and its accelerometer hasn't physically changed, but the software has been upgraded a few times.
Have you tried towing the trailer with a different vehicle? Doing so would pretty quickly isolate the location of the problem.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Tekonsha Primus IQ Trailer Brake Controller - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 3 Axles
- LED Display
- Up to 90 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Manual Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- Indicator Lights
- Up to 90 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Hook Probe Circuit Tester
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Video: Trailer Brake Controller Wire Testing
- Video: Performance Tool Hook Probe Circuit Tester Review
- Shop: Trailer Wiring
- Shop: Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable - Trailer End - 6' Long
- Shop: 7-Way Molded Trailer Wire Connector, 4' Long
- Video: Bargman 7-Way Molded Trailer End Installation
- Video: This Old Trailer: Replacing a 6-Pole Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer brake controller
- Shop: Trailer Hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Search Results: brake controller
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Search Results: etbc7
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Gooseneck Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Search Results: trailer hitch
on Trailer Brake Controller
