Fifth Wheel Bracket Kit Recommendation for a 2008 Chevy Silverado Long Bed

Question

Question:

Will part c16412 fit a 2008 chevy silverado 2500 long bed?

asked by: George S

0

Expert Reply:

For your 2008 Chevy Silverado long bed the correct Curt custom bracket kit you would need is the part # C16418 and not the # C16413.

If you need the rails as well use the kit # C16418-204.

expert reply by: Jameson C

0

Answer 1

As long as your 2010 GMC Sierra 2500HD has a towing capacity great enough to tow your Montana 5th wheel trailer then you should not have any problems towing through the mountains. I would recommend a transmission cooler given the weight of the…

view full answer...

Answer 2

I would recommend going with the Reese Fifth Wheel Installation Kit, item #RP50064-58, for your 2008 Chevrolet Silverado 2500, because it is the best selling kit, and replacement parts are easily available if needed. We have instructions, see link,…

view full answer...

Answer 3

Yes they do! I can confirm the Curt Custom Fifth Wheel Installation Kit for Chevy/GMC #C16418-104 do fit your 2008 GMC Sierra 2500. These are the same as the Curt Custom Fifth Wheel Installation Kit for Chevy/GMC #C16418-204, with the only difference…

view full answer...

Answer 4

Yes, the Pullrite Superglide 2900 18K will fit the industry standard Curt fifth wheel rails part #C16418-104 without any adapters. The Pullrite Superglide 2900 is one of Pullrites Superglide hitches that fit the industry standard rails. The other…

view full answer...

Answer 5

Yes, you can definitely cut out parts of the BedRug Custom Full Truck Bed Liner so that you have access to the puck system for 5th wheel towing with your 2013 Ford F-350. The correct BedRug for your pickup depends on the following specs for your…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 9

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 10

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 11

Yes you are - all 5th wheel hitches are going to require some type of rails in order to be used. So you'd need #DM8552016-71 for your 2006 Dodge Ram.

view full answer...

Answer 12

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...

Fifth Wheel Bracket Kit Recommendation for a 2008 Chevy Silverado Long Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching