Recommended Truck Bed Stake Anchors for 2015 Chevy Silverado

Question

Question:

hello i need rear truck bed stake anchors that cover the plastic rail holes on 2015 chevy silverado crew cab ltz.the top cover plate needs to cover a 2 1/4inch x 4 1/4inch opening.the new hole is not shaped different than old trucks

asked by: Richard

0

Expert Reply:

I recommend the nifty Putco Pop up Anchors, part # P99901. This is a universal fit item designed to fit most pickup trucks with the exception of GM New Body trucks, which it does not sound like you have. They are secured in the stake bed pocket by tightening the included screws and expanding the blocks on the underside of the rail of your 2015 Chevrolet Silverado truck.

To determine if your 2015 Chevrolet Silverado is the old or the new body style all you have to do is look at the back of the truck. If it is the old body style (Classic) then it will have amber turn signal lenses at the rear tail lights. New body style models will not have amber lenses and will also have a large logo in the center of the tailgate.

I have included a picture showing old and new body styles side by side.

I have included a link to a video that shows these tie-downs being installed you can check out.

expert reply by: Chris O

0

click to enlarge

Answer 1

Lance decided to be unique and come up with their own plug which can be pretty frustrating. According to my research the reverse light function should be the pin in the 11 o'clock position when you're looing at the camper end plug head-on.…

view full answer...

Answer 2

We usually tell people to look for about 3 inches of clearance to account for the total travel capabilities of trailer suspension. If you have less than 3 inches you might be able to compensate by using slightly longer shackle straps. I have included…

view full answer...

Answer 3

I checked with Wesbar and the lens only for the LED version of the tail lights you have is not available as a separate part but you can replace the light with #271595 for the left side of the trailer and #271594 for the right side.

view full answer...

Answer 4

The correct fitting BullRing tie-downs for your 2021 GMC Sierra 3500 are new, which is why they've been hard to find until now. You'll need the BullRing Stake Pocket D-Rings #BU94VR. These tie-downs are only compatible with the stake pockets…

view full answer...

Answer 5

So there actually isn't any specific weight capacity for the HappiJac Truck-Mounted Camper Tie-Downs #LC236326-205221. These are designed to handle the weight of any truck bed camper, and that's true of any camper tie-down, which is why there…

view full answer...

Answer 6

I do have a possible solution for you but I called my contact at Erickson Manufacturing and they informed me that the Erickson Retractable Tie-Down Anchors part #EM01003 would not fit your 2011 Toyota Tundra. Instead, you will need to look at a more…

view full answer...

Answer 7

The fan on your Progressive Dynamics #PD9260C running more often than usual could mean a couple of things are going on here; and you're correct in thinking that most of them aren't a good sign. It sounds like you've cleaned out the vents…

view full answer...

Answer 8

The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9260C you referenced will charge your trailer's battery and convert AC to DC power when hooked up to shore power. It uses an integrated Charge Wizard that monitors…

view full answer...