Process for Lowering Exhaust on 2015 Mazda 3 Sedan to Install Trailer Hitch

Question

Question:

Hello, The instructions mention that for installation the exhaust will have to be lowered. Is there a documented process for doing that on a 2015? I have done car work before but never exhaust work. Also by lowered does it have to be removed completely or does it just hang down

asked by: Kevin A

0

Expert Reply:

I spoke with my contact at Draw-Tite and he said you will only need to lower the exhaust if you need additional clearance for installation of Draw-Tite trailer hitch # 24912 on your 2015 Mazda 3. If you find you need to lower the exhaust, you will want to do it at the rubber isolators. He recommended spraying a lubricant on the metal hanger rod and rubber isolator to help with removal. Other than those recommendations Cequent does not have a documented process for lowering the exhaust.

We have a video that shows the lowering of an exhaust which I have linked to, as well as a a FAQ with several install tips.

expert reply by: Chris O

0

Answer 1

Close, however the correct Draw-Tite hitch for a Mazda 3 Sedan is part #24912. This hitch will work on models with or without LED Lights. The other hitch, part #24914, fits the hatchback models, and is shaped differently than the sedan model.…

view full answer...

Answer 2

According to the owner's manual for your 2018 Mazda 3, "Your Mazda is not designed for towing. Never tow a trailer with your Mazda." However, if you choose to ignore this recommendation then you will want to use the Curt Trailer Hitch…

view full answer...

Answer 3

When we installed the Curt Trailer Hitch Receiver part #C11377 on a similar 2017 Mazda 3 we found that the distance from the ground to the top of the inside edge on the receiver tube is 11-1/2". Since the trailer hitch has a 1-1/4" receiver…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Answer 11

Sorry to hear about your car accident and your hitch and bike rack being damaged. As far as installing a new hitch, the first thought that comes to mind is, because of the accident, are all the necessary attachment points for a trailer hitch on the…

view full answer...

Answer 12

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

view full answer...

Process for Lowering Exhaust on 2015 Mazda 3 Sedan to Install Trailer Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching