Draw-Tite Sportframe Trailer Hitch Installation - 2015 Mazda 3 Video

The Draw Tite Hitch part #24914 is designed to fit inside the two tail pipes like what you see in the picture I attached. What most likely happened is your hitch got slightly bent in shipping and that is what is causing the interference. As long as…

Though I can confirm the EcoHitch #306-X7303 will absolutely fit a 2016 Mazda 3, we have yet to do an install with said hitch. However, we do have an install we did with a Draw-Tite #24912 on a 2015 Mazda 3. There will be a few subtle differences,…

Using a lift is certainly the most convenient way to go, but is not absolutely necessary. When I installed the hitch on my van, I did not need to raise the vehicle at all. Having the vehicle on jack stands or ramps would make your installation easier…

I have attached the images of the installation instructions for the EcoHitch Hidden Trailer Hitch Receiver #306-X7299 that you can take a look at. All of the necessary hardware is included and you won't need to do any drilling or welding. I have…

There is no cutting or trimming of the rear fascia/bumper of your 2014 Mazda 3 required to install the Draw Tite hitch part #24912. To see more install info check out the installation instructions I attached to the right. In the unlikely event of you…

Hatch-mount bike carriers for your 2018 Mazda 3 Hatchback are available in 2-bike and 3-bike capacities. No 4-bike trunk racks are made since they would simply be too heavy for a car's sheet metal trunk or hatch. If you can get by with a 3-bike…

Yes, the EcoHitch part #306-X7303 fits both a 2016 and a 2018 Mazda 3 Sedan.

For your 2018 Mazda 3 sedan Draw-Tite trailer hitch #24912 will fit and is the hitch I recommend. The two pictures you have included are such different angles that the differences could be explained by the angles. I have included a link to the…

According to the owner's manual for your 2018 Mazda 3, "Your Mazda is not designed for towing. Never tow a trailer with your Mazda." However, if you choose to ignore this recommendation then you will want to use the Curt Trailer Hitch…

Thanks so much for the photo and the info on your cargo box model. I'm not 100 percent certain which part you are referring to, so I will list all of the available replacement parts for your Thule Atlantis 1600XT cargo box, which I confirmed with…

I spoke with my contact at Draw-Tite and he said you will only need to lower the exhaust if you need additional clearance for installation of Draw-Tite trailer hitch #24912 on your 2015 Mazda 3. If you find you need to lower the exhaust, you will…

There are two holes on the side of your frame underneath the tape of your 2019 Mazda 3. You might double check to make sure you checked the correct one as it's pretty easy to mistake the wrong one. I attached a picture that shows which slot to…