How to Determine if the Derale Transmission Pan Cooler # D14208 Would Clear Exhaust

Question

Question:

Hello, My concern is if the pan will clear my exhaust on my motorhome. I like that the pan has a spot for an aftermarket temp gauge. Thank You,

asked by: Jeff R

0

Expert Reply:

The depth of the Derale Transmission Pan Cooler # D14208 that you referenced measures 6-1/8 inches from the mounting surface of the pan down to the bottom of it. You would need to measure from where you current pan mounting surface down 6-1/8 inches to see if the pan would clear.

expert reply by: Jameson C

0

click to enlarge

Answer 1

You should not need to use a filter extender to install this Derale Transmission Pan Cooler #D14208 in your 2001 Ford F-350. I spoke with my contact at Derale to confirm this also.

view full answer...

Answer 2

My technical contact at Derale confirmed that you will use your stock transmission filter on your 1997 Ford F-350 Powerstroke when installing the Derale Transmission Pan Cooler #D14208. To install this properly your truck must have either the E4OD,…

view full answer...

Answer 3

I have not heard about issues with the tubes on a transmission pan cooler, like #D14208, getting clogged up with anything. However, I could see how that could happen if you are off road a lot or drive through tall snow banks. Every day road grime…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

I have attached an image of the Draw-Tite Ultra Frame Trailer Hitch Receiver #41947 referenced in your question with a few dimensions labeled. The distance between mounting holes, from the left side mounting bracket to the right side mounting bracket…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

How to Determine if the Derale Transmission Pan Cooler # D14208 Would Clear Exhaust

Product Page this Question was Asked From

Continue Researching