Instruction Manual for Tekonsha Podigy P2 # 90885 Brake Controller

Question

Question:

We just recently purchased a 2003 Lexus GX 470 which came with your 90085 brake controller proportional. We have no idea on how to use this device when towing a trailer. Do you have a manual available on how to use it?

asked by: Bill W

0

Expert Reply:

We sure do! I've linked you to a copy of the installation instructions which you can print out if you wish.

I've also linked you to our Brake Controller FAQ article, which includes much more information about brake controllers and how they operate.

expert reply by: Mike L

0

Dan F.

2/7/2020

We are looking for a Owners manual for Prodigy P2.I am not able to find online. Where would be the best place?I only find WordPress, but for some reason my Flash player will notallow it.Thank you

Reply

Jason S.

2/10/2020

I've linked the manual for the Prodigy P2 # 90885. It is the pdf so you should be able to open it without issue. If you still have issues then you may need to download a different pdf viewer. I've also attached the product page and we have so many videos that will walk you through all the features and installation.

Helpful Links

instructions.aspx?pn=90885

tv-Demo-Tekonsha-Brake-Controller-90885.aspx

tv-review-tekonsha-prodigy-p2-brake-controller-90885.aspx

Reply

Answer 1

The Replacement Suction Cup Mount #LC776462 is actually fairly simple to remove and then reinstall on the 4.3" monitor that comes with the Furrion Vision S System #FOS43TASF. To remove the base you'll need to pull the cup mount and…

view full answer...

Answer 2

The four wires of the Jensen RV Speaker - Panel Mount #JWMS350HP does not connect into the pre-out on the head unit. Instead, it will simply connect to the pigtail wiring of one of the two wall mount RV stereos it is designed to accompany, the…

view full answer...

Answer 3

7k trailer brake assemblies like the part #23-464-465 can work in 6k axle hubs but 6k assemblies like #23-458-459 are the better option. 7k brakes in a 6k axle hub do not improve braking power. Basically they have a stronger magnet in them which is…

view full answer...

Answer 4

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Answer 5

Brake controller wiring harness #22292 plugs into the built-in connector beneath your vehicle's dashboard. To access this connector, first locate the instrument cluster finish panel in the center of you dash, near the driver's side. Carefully…

view full answer...

Answer 6

There are many things that can affect the voltage on the brake output wire from your brake controller to your trailer brakes such as the power setting on your brake controller, how you are testing the wire and if you are testing it with the brakes or…

view full answer...

Answer 7

I took a look at the instructions manual for your Draw-Tite I-Command Trailer Brake Controller #5535. It looks like the "P.L." error code you are seeing indicates a power interruption while the brake pedal is depressed, and the…

view full answer...

Answer 8

You can still use the connector you have but you would need to move the red wire of the connector that plugs in to the vehicle to the opposite corner of the connector. Once you do that the brake controller will work just fine. I attached a picture…

view full answer...

Answer 9

In order to upgrade from a 6 on 5-1/2" bolt pattern to a 8 on 6-1/2" bolt pattern on a Dexter 6K Axle you'll need the Dexter Trailer Hub and Drum Assembly part #42866UC3-EZ. The Dexter 5,200 lb - 7,000 lb axles all have the same size…

view full answer...

Answer 10

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 11

That's a good question, and when installed correctly, the lights will be on when the vehicle's circuit is functioning properly for the Adapter 4 Way to 7-Blade RV Connector w/Test Lamps #C96KR. The test light does NOT indicate there is any…

view full answer...

Answer 12

The test lights on the Adapter 4 Way to 7-Blade RV Connector w/Test Lamps #C96KR will be lit up when those circuits are hot on your 2005 Ford Explorer Sport Trac. So if your vehicle is always pushing power out to the connector the lights should…

view full answer...

Instruction Manual for Tekonsha Podigy P2 # 90885 Brake Controller

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching