Axle Recommendation with 74 inch Spring Center Dimensions
Question:
I purchased an old trailer, and Im in process of rebuilding it. I measured my axle and cant seem to fin one that fits my trailer. the measurement from hub face to hub face is 91 inch and the spring center is 74. Im looking for a 3,500 lbs. Thanks in advance for any help you can provide.
asked by: Victor C
Helpful Expert Reply:
Of the axles that we carry the part # T3584F-EZ-8974 that you referenced would be the closest one we carry to what you would need. The spring center measurement is the same at 74 inches. The issues is that this axle measures 89 inches from hub face to hub face so it would be 2 inches shorter than what you currently have. If the wheels and tires could be an inch closer to the frame on your trailer on either side without causing interference this axle would work well for you.
Otherwise you will need to find a shop local to you that will let you custom order in axles to your specs.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Video: etrailer Trailer Leaf Springs Review
- Search Results: hub grease cap
- Shop: Trailer Spindle Nut 1"
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Video: Dexter Axle Trailer Axles - Leaf Spring Suspension - T3584F-EZ-8974 Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Q&A: Typical Trailer Suspension Hanger Spacing Relative to Leaf Spring Size
- Q&A: How to Determine Spring-Center and Hub-Face Measurements when Building a Trailer
- Article: Trailer Wiring Diagrams
- Q&A: How to Measure Hub Face of Mobile Home Hub and Drum
- Search Results: 44649
- Shop: Trailer Hitch
- Search Results: 25580
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust cap
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Shop: Brake Controller
- Shop: Fifth Wheel Hitch
on Trailer Suspension Parts
