Roof Rack to Fit in Factory Side Rails on a 2014 Jeep Grand Cherokee

Question

Question:

Greetings , I am looking to buy these for a 2014 Grand Cherokee , but cant decide on the design. In the pictures attached , i see that the Rhino webpage show 2 different images of the same product. I want the look of the first one , which seems to have a cover for the bases/feet of the bars . Could you please inform if this is the actual item , or the other bare looking one.? Thanks ,

asked by: Nabil D

0

Expert Reply:

Rhino-Rack roof rack # RRRVP27 is designed to fit a 2014 Jeep Grand Cherokee with the chrome side rails that run front to back. the feet will attach to the channel in the side rails so the clamps will not be visible.

expert reply by: Michael H

0

click to enlarge

Answer 1

There are some large rooftop cargo baskets that can mount to your roof side rails without the need for crossbars. Surco offers their 60 x 50 x 5 inch #SPS5060-1101, which weighs 34 lbs, and the 50 x 45 x 5 inch version #SPS4550-1101, which weighs 32…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 8

Hey Luke, Sorry about the confusion, and we can 100% get your 2007 Honda Civic 4-door sedan set up with all the parts needed for a Rhino-Rack roof rack, including both crossbars. You would just need these parts: - Rhino-Rack Vortex Aero Crossbars…

view full answer...

Answer 9

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 10

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 11

No, I am sorry I can not help you John. The steel cable you're needing isn't available. It connects inside the Brake Buddy Stealth Supplemental Braking System item #HM39530 so Hopkins does not offer a replacement.

view full answer...

Answer 12

I have a solution for you, but it will require a little wiring and it is not the Trailer Wiring Harness part #20137. There currently isn't a plug and play replacement 7-way available for your 2006 Toyota Tacoma so the best recommendation I can…

view full answer...