Will Thule Adventurer 650 Cargo Box Fit a 2012 Honda Odyssey Touring Elite with Factory Roof Rack

Question

Question:

I have lost the hardware for my Thule Adventurer 650 and when I used it previously it was on an Acura MDX 2006. I am wondering if I buy these parts for the Thule Adventurer 650 if it will allow me to mount the Thule Adventurer 650 on my 2012 Honda Odyssey? Thanks so much!

asked by: Jessica N

0

Expert Reply:

As long as the crossbars on your 2012 Honda Odyssey are less than 3-5/8 inches wide the replacement hardware, # TH04997, will fit. The hardware consists of a complete replacement kit. No other parts are needed.

expert reply by: Michael H

0

Answer 1

According to my contact at Thule, the mounting hardware that came with the Thule Summit cargo box was designed to fit round, square and most factory installed crossbars. As long as the crossbars on your 2013 Ford Explorer are not wider than 3-5/8…

view full answer...

Answer 2

I spoke with my contact at Thule. He stated that the Thule QM3 Quick On-Off Mounting Hardware Kit for Adventurer Cargo Box, #TH04997, will fit your 650 Adventurer Cargo Box and it will fit the Yakima round load bars.

view full answer...

Answer 3

I can certainly help you out. The hardware used on the Thule Adventurer is #TH04997 that you have referenced. There is a specific order in which all of the parts will go on the crossbars. I have included a picture that shows how all of the parts go…

view full answer...

Answer 4

If you can get the number off of the lock core all you need is the part #THKEYNXXX where the X's would equal the lock number. If the key is in the unlocked position the change key of the part #TH450200 would insert and then allow the core to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 10

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 11

Hi there Bo, we do have the trailer hitch and wiring you need for your 2005 GMC Yukon. The fits for both are the following: - Curt Trailer Hitch Receiver #C15324 - Tail Light Converter with 4-Pole Flat Trailer Connector #C59236 The hitch is a Class V…

view full answer...

Answer 12

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...