What Needs to Be Trimmed to Install the Curt Front Hitch part # C31074

Question

Question:

Are you talking about the METAL skidplate or just the plastic in front of it?

asked by: Pat

0

Expert Reply:

Actually to install the Curt Front Hitch part # C31074 on your 2015 Chevy Colorado trimming of the both the plastic lower fascia and the metal skid plate may be required. See attached picture and install instructions I attached as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Curt #C31074 front mount receiver has shipping weight of 36 lbs, minus the packaging the hitch weighs about 30 lbs. I've linked the installation instructions for you. The Curt #33328 front mount receiver you'd looked at is a fit for a…

view full answer...

Answer 2

There's no reason the Curt Front Mount Trailer Hitch Receiver #C31074 couldn't be used with the 6 inch lift you have installed on your 2018 GMC Canyon Denali.

view full answer...

Answer 3

The Curt front hitch part #C31074 that you referenced is a confirmed fit for your 2018 Chevy Colorado 4x4 and would work great. I double checked with Curt just now to confirm this.

view full answer...

Answer 4

The Curt #C31074 front mount hitch is a fit for all models of the 2018 GMC Canyon. It's the Colorado that has the fit exclusion for the ZR2 Off-Road package but there are no fit exclusions for the Canyon, as confirmed by Curt Manufacturing.

view full answer...

Answer 5

You do not have to remove the front fascia on your 2021 Chevrolet Colorado LT to trim it when install the Curt Front Mount Trailer Hitch Receiver #C31074. Not all fascia's will require trimming so be sure to test fit the receiver before trimming…

view full answer...

Answer 6

Yes, the Curt Front Mount Trailer Hitch Receiver, #C31074 with a 2" x 2" opening is a confirmed fit for your 2022 Chevy Colorado. This actually fits both gas and diesel engine models. This is a bolt-on installation with all needed hardware…

view full answer...

Answer 7

The Curt Front Hitch part #C31074 is a fit for your 2017 Chevy Colorado. Is that your truck in the picture you sent in??

view full answer...

Answer 8

Yes, the installation instructions for Curt front mount receiver #C31074 are linked on the right hand side of its product page. I have also included a link to them for you here. This receiver does fit your 2015 Chevy Colorado and the front skid plate…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Hey Lester, so the Curt Front Hitch #C31076 will be a fit for the 2022 Toyota 4RunnerTRD Off Road Premium. I can't speak on what Amazon says, but I doubt their product information is written by folks who actually know the products. I went ahead…

view full answer...