Front Mount Hitch Receiver for a 2015 Chevy Colorado

Question

Question:

You guys have the installation instructions available for this product? As you suggest, pictures also make a great answer.

asked by: Walt

0

Expert Reply:

Yes, the installation instructions for Curt front mount receiver # C31074 are linked on the right hand side of its product page. I have also included a link to them for you here. This receiver does fit your 2015 Chevy Colorado and the front skid plate will need to be removed and/or trimmed.

expert reply by: Michael H

0

click to enlarge

Answer 1

The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of insufficient gauge to allow enough power to pass through to run a trailer mounted winch. The main function of that circuit would be for lighter-duty…

view full answer...

Answer 2

I have a measurement for you that will help you to determine exactly where the bottom of the Curt Front Mount Trailer Hitch Receiver #C31074 is going to sit on your 2019 GMC Canyon as we have not installed on inside our facility to take this…

view full answer...

Answer 3

For your 2016 Chevy Colorado you can use Curt front mount hitch receiver #C31074. I have included a link to the installation instructions for you. This hitch will work great with a snowplow such as #K2AVAL8422. This popular plow comes with a wireless…

view full answer...

Answer 4

The Curt Front Mount Trailer Hitch Receiver part #C31074 which is a fit for a 2022 GMC Canyon won't change the ride height at all but it will change your ground clearance by a bit because you now have a receiver under the bumper that hangs down a…

view full answer...

Answer 5

I attached a picture that shows what the Draw Tite front hitch part #65071 looks like when installed. It's not totally hidden but I would say that it doesn't stand out too much. There isn't a more hidden option out there so this would be…

view full answer...

Answer 6

There's no reason the Curt Front Mount Trailer Hitch Receiver #C31074 couldn't be used with the 6 inch lift you have installed on your 2018 GMC Canyon Denali.

view full answer...

Answer 7

Actually to install the Curt Front Hitch part #C31074 on your 2015 Chevy Colorado trimming of the both the plastic lower fascia and the metal skid plate may be required. See attached picture and install instructions I attached as well.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Front Mount Hitch Receiver for a 2015 Chevy Colorado

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching