Weight of Curt C31074 Front Mounted Receiver for 2020 Chevy Colorado

Question

Question:

How much does your front-mounted hitch for the 2020 Chevy Colorado weigh?

asked by: Tony S

0

Expert Reply:

The Curt # C31074 front mount receiver has shipping weight of 36 lbs, minus the packaging the hitch weighs about 30 lbs. I've linked the installation instructions for you.

The Curt # 33328 front mount receiver you'd looked at is a fit for a 2003 - 2008 Honda Pilot or a 2006 - 2014 Honda Ridgeline, and wouldn't fit your Colorado.

expert reply by: Mike L

0

Answer 1

There's no reason the Curt Front Mount Trailer Hitch Receiver #C31074 couldn't be used with the 6 inch lift you have installed on your 2018 GMC Canyon Denali.

view full answer...

Answer 2

The Curt front hitch part #C31074 that you referenced is a confirmed fit for your 2018 Chevy Colorado 4x4 and would work great. I double checked with Curt just now to confirm this.

view full answer...

Answer 3

The Curt #C31074 front mount hitch is a fit for all models of the 2018 GMC Canyon. It's the Colorado that has the fit exclusion for the ZR2 Off-Road package but there are no fit exclusions for the Canyon, as confirmed by Curt Manufacturing.

view full answer...

Answer 4

Actually to install the Curt Front Hitch part #C31074 on your 2015 Chevy Colorado trimming of the both the plastic lower fascia and the metal skid plate may be required. See attached picture and install instructions I attached as well.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The EcoHitch Hidden Trailer Hitch Receiver #EH35VR may interfere with the Hands-free Liftgate sensor like all of the other hitches. Typically this means you will need to place your foot on either side of the receiver tube in order to activate the…

view full answer...

Answer 7

There is indeed a front-mounted trailer hitch that fits your 2024 Ram 2500, from Curt, at the following part number: - EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH37FR I verified this fit directly with the manufacturer for you, and it fits…

view full answer...

Answer 8

Yes we do have a hitch available that will fit your 2022 Ram 3500 diesel. This will be the Ecohitch #EH37FR. This will require some trimming of the air dam and intercooler shroud, but it has been confirmed to fit the diesel models. I have linked an…

view full answer...

Answer 9

The Yakima LongArm with Extender, part #Y01149-1150, can be used as a lift-assist like the Rhino-Rack T-Load, part #RTL002, in theory. However, the setup is not ideal or one I recommend. The advantages the T-Load has are the loading strap and the two…

view full answer...

Answer 10

The front ends of the Silverados and Sierras like your 2018 GMC 2500 are a bit different but the fascia trimming required is the same as you can see in the two attached pictures when installing front hitch #65078. Basically a hole gets cut through…

view full answer...

Answer 11

I do not have a completed installation photo nor did EcoHitch, but I can provide a photo showing where the receiver tube will sit in relation to the bumper. You'll need to make a hole in the fascia under the bumper directly behind where the front…

view full answer...

Answer 12

Sounds like you are looking for a hitch mounted cargo carrier to mount in a front hitch for your truck. The most popular cargo carrier we have is the etrailer #e98874 which will fit a 2 inch hitch and can fold up when not needed. Being able to fold…

view full answer...