Will Curt Front Hitch for 2018 GMC Canyon Denali Fit with 6 inch Lift

Question

Question:

I have a 2018 GMC Canyon Denali 4x4, and want to confirm if this will fit with a 6inch Rough Country Lift Kit?

asked by: Sal

0

Expert Reply:

There's no reason the Curt Front Mount Trailer Hitch Receiver # C31074 couldn't be used with the 6 inch lift you have installed on your 2018 GMC Canyon Denali.

expert reply by: Jameson C

0

Answer 1

The Curt #C31074 front mount hitch is a fit for all models of the 2018 GMC Canyon. It's the Colorado that has the fit exclusion for the ZR2 Off-Road package but there are no fit exclusions for the Canyon, as confirmed by Curt Manufacturing.

view full answer...

Answer 2

The Curt #C31074 front mount receiver has shipping weight of 36 lbs, minus the packaging the hitch weighs about 30 lbs. I've linked the installation instructions for you. The Curt #33328 front mount receiver you'd looked at is a fit for a…

view full answer...

Answer 3

The Curt front hitch part #C31074 that you referenced is a confirmed fit for your 2018 Chevy Colorado 4x4 and would work great. I double checked with Curt just now to confirm this.

view full answer...

Answer 4

Actually to install the Curt Front Hitch part #C31074 on your 2015 Chevy Colorado trimming of the both the plastic lower fascia and the metal skid plate may be required. See attached picture and install instructions I attached as well.

view full answer...

Answer 5

Yes, the installation instructions for Curt front mount receiver #C31074 are linked on the right hand side of its product page. I have also included a link to them for you here. This receiver does fit your 2015 Chevy Colorado and the front skid plate…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

M12-1.5 and 1/2"-20 threads are not going to be interchangeable. The diameter of an M12 thread is only going to be 0.4724" while 1/2" threads are going to be 0.500" in diameter. We currently only have 1/2"-20 Lug Nuts…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...