Stake Pocket Tie-Down Anchors for Use on Car Hauler Trailer

Question

Question:

Hello, The stake pockets on my car hauler trailer are 4 inches deep so these anchors will not work. Do you have any longer tie down anchors like these that will work with deeper stake pockets? Thanks very much.

asked by: Dane B

0

Expert Reply:

We offer a range of stake pocket tie downs for truck and trailer applications that can be seen on the link provided. Most of these products are intended for use on trucks where the vehicle stake pocket dimensions are known, but we also offer universal-fit types that may be better suited to your trailer application.

For example, Putco offers their Push-Up Tie-Downs # P99901 that are made of stainless steel and which offer a 1000-lb capacity per pair.

Brophy offers a stake pocket tie down similar to the Redline # WFSPDR that you referenced. Brophy's # T355 fits 2 x 4-inch stake pockets and offers a 5000-lb capacity. This item measures 5-1/4-inches high from the bottom on the mounting flange and 3-1/2-inches wide as shown in the photo I have prepared for you.

We also offer recessed D-ring tie downs like the Brophy # RR5K that is made of zinc plated steel and which includes a backing plate and hardware. A video showing installation is linked for you.

expert reply by: Adam R

0

click to enlarge

Answer 1

I spoke with my contact at Erickson regarding the Erickson Heavy-Duty Anchor #EM01003 for your 2005 Toyota Tundra Double Cab, and she said the product you referenced will not work on your vehicle based on your description of the stake pockets. An…

view full answer...

Answer 2

If you look at the outermost part of the spindle on your axle there will be what is called a grease zerk or grease gun fitting. It will look like a tiny round ball which is where you can attach a grease gun to grease your spindle. If your spindle…

view full answer...

Answer 3

Since you have an older trailer, the brakes could have possibly been switched from electric to hydraulic or the other way around. Even on newer campers, unless it is just purchased from the manufacturer, it would be just a guessing game for someone…

view full answer...

Answer 4

Looking at the BAL Retract-A-Spare it has a much different design than the Lippert Spare Tire Winch #LC159056 you found. You may be able to mount the new winch so it will still work on your trailer but as we do not have both the products here with…

view full answer...

Answer 5

Yes we have the Redarc In-Vehicle BCDC Battery Charger #RED96FR which essentially is the same thing as the charging system you referenced as it gives you a way to enhance the charging circuit ran to your 7-way to put the best charge on the trailer…

view full answer...

Answer 6

The weight of the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2-1/2" Hitch - 6" Drop/Rise - 21K #325-GH-1324 is 115 lbs.

view full answer...

Answer 7

So I went out to the warehouse and measured the stake pocket anchor #TL2B and from the lip to the top of the pin hole is right at 6-3/4". As long as your stake pocket is really only 6" deep these will work just fine for you.

view full answer...

Answer 8

I think we have just what you are looking for. Check out our Stake Pocket Tie-Down Anchor, #WFSPDR. This anchor mounts in the stake pockets on your trailer and gives you a d-ring tie-down point. These will work great with the Bulldog Winch Tie-Down…

view full answer...

Answer 9

Yes, the left and right hand assemblies of the kit part number #AKEBRK-10 are available as part numbers #AKEBRK-10R for the right hand side and part #AKEBRK-10L for the left hand side. The kit does not include anything beyond just the two…

view full answer...

Answer 10

The Hook and Keeper Latch #BP64FR only comes in 4". We do carry 6" hooks but they have a slightly different design: T-Style Hook and Keeper Door Holder for RV or Enclosed Trailer - 6" Hook - Plastic - Black #37210434 Hook…

view full answer...

Answer 11

The Adco Tyre Gard RV Wheel Cover #290-3623 (camo) is 70" long x 27" high x 9" deep. This will fit around tires with 27" to 29" diameter. Usually tandem axles only vary slightly in length and the general…

view full answer...

Answer 12

I attached a picture I got from Buyers Products that has the dimensions of the Buyers Products Hook and Keeper for Enclosed Trailer Door #BP64FR that has the dimensions you are looking for.

view full answer...