Will Anti-Sway Bar Work On 2014 Dodge Ram 3500 4X4 Pick-Up

Question

Question:

Hi: Im looking for a sway bar for my Dodge RAM 2014 Pick Up 3500 4X4 with gasoline engine 6.4L SWR. I need to know the correct part number. Thanks for your help.

asked by: Jose P

0

Expert Reply:

The Roadmaster Anti-Sway Bars we offer for a 2014 Dodge Ram 3500 like part # RM-1129-130, are designed to only work with Dually pick-ups.

If you have a Dually this will attach to the rear axle of your truck and help reduce body roll and balance weight transfer. The bar diameter for this anti-sway system is 1-3/8 inches. This is made in the USA and has a 1 year warranty.

expert reply by: Jeffrey L

0

Answer 1

I contacted Roadmaster to verify that the Rear Anti-Sway Bar, #RM73FR is a confirmed fit for the 2019 Ram 3500 be it DRW or SWR. They confirmed this part is the correct for either type.

view full answer...

Answer 2

For your 2014 Dodge Ram 3500 the correct anti-sway bar is the Roadmaster Anti-Sway Bar #RM-1129-130, that you referenced, as long as your Ram 3500 is a dually. This anti-sway bar will improve handing and reduce sway, especially on rough secondary…

view full answer...

Answer 3

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 4

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 5

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 6

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

view full answer...

Answer 7

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...

Answer 8

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the next step.…

view full answer...

Answer 11

The Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-1139-143 can use your factory u-bolts if they are long enough. If they are not, then Roadmaster recommends using the 7/8 inch diameter u-bolts that are longer (most likely the larger diameter due…

view full answer...

Answer 12

To flat tow your 2021 Jeep Wrangler Unlimited 4Xe Rubicon Hybrid you will need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you listed below: Tow Bar: Roadmaster Nighthawk All…

view full answer...