To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.6 out of 5 stars (271 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.The trailer hitch receiver was shipped damaged. The support angle bracket was bent. Had to restrained bracket.
Great customer service. Fast Shipping. Excellent video installation information. Installed just like the video showed. Great Quality.
Finan, J.
4/1/2024
Great. No concerns after a year of use. Use mostly for a bike rack.
This hitch is more than adequate for my needs. It was fairly easy to install- once I read through the instructions.I had to become familiar with my truck's spare tire tools. Another "learning curve"!
I installed this hitch on my new colorado pick up. It fit perfectly and was easy to install.
Looks great and of course hauls my trailer well.
Good looking & well built receiver. Though I did have to grind off a bit of it so the bumber would go back to original location for bolts to line up.
Pretty straight forward installing. Bolts right in. Will need a hand to hold it in place to install. A little heavier than the one that was under the tuck for bumper ball. Looks great and fits great !! Also got the OEM style wiring kit. That as well fits as it should and fairly easy to install.
Sam S.
8/24/2022
Working out very well with no problems! Direct replacement!
fit perfect, easy to install with the directions from etrailer made so simple.
It was easy to install after watching your you tube video. I use it for my bike rack but I got a class3 incase I do decide to tow something.
Great Trailer Hitch Receiver. Simple and easy to install the unit. Followed instructions and video for hassle free install.
Easy to install specially after watching the installation videos for the hitch and wire harness. Looks amd works great!
Box was damaged, could you send detailed dimensions so I can tell if it’s bent.
Thanks
Katrina B.
3/16/2023
We dont really have any detailed dimensions available at the moment for this item. I do recommend making sure it is at a 90 degree angle. I am also getting these dimensions added to our site for future reference.
Dwight P.
3/6/2024
Its great just like it should
Jerred H.
3/7/2024
I am very happy with the hitch
The instructions were helpful
The install was was ok , would be better if you can
have the truck on a lift but it went pretty OK without the lift
Anyway overall very satisfied
Thx …. Peace
The product was good. The fit was horrible. It took my mechanic 6 hours to adjust to make fit. Yes i ordered the right one. The flanges had to be beat out and then reshaped to fit.It may have been "custom fit" but it wasn't custom fit to my truck. Ordered through etrailer through customer service rep named Peyton, even spoke to her on the pholne to make sure it was correct.
Had local mechanic put it on for me and it took about 15 minutes. Solid and works well with my bike rack. Thanks!
Excellent quality and fairly easy to install. Instructions would do well to mention that if you don’t have a lift rack you’ll need two extra people to install.
Thomas
7/5/2023
Product was destroyed when the vehicle caught fire and exploded. Up until that time it worked well.
It fit perfectly. This is a strong hitch that has done a great job over the past year.
The welds on the top side of the brackets were not ground down enough and caused the side holes to be too low for the holes in the truck frame. I had to file down the hole to make room to get the bolts in.
I installed this in my driveway lying on back with help. We went by the installation process in the online video.
It took teamwork to break the factory bolts loose. We got tow bar in place by trial and error. The hard part is getting the bumper mount lined up with the bar and the frame in order to get the bolts in finger tight.
The specs for the bolts had torque rated at 160 ft-lbs. I couldn't reach that but got it close. Installation was complete and I cut the tape off of the receiver. Inside were instructions giving torque as 100 ft-lbs. I wouldn't do less than 120.
Great service on follow up on problem with damage delivery service for reorder to correct damage that was caused by delivery service
AS far as the product, first impressions are great! Bought this as a gift for my dad and his '19 Chevy Colorado. I purchase this and the wiring harness. Awaiting until Christmas for an install. My only complaint was the shipping. My wife and I have had too many issues with UPS in the pass and the delivery of these items were no different. Although the items showed up early, I can't get over UPS lying stating a delivery attempt was made. I have Ring video of the time they are stating that says otherwise. Then once the items finally arrived the next day, the box containing the harness was fine but the hitch looks as if it had been dragged around and dropped. You can see from the pictures that the wrapping isn't sufficient to protect it from drops. So, as I said, I would look into shipping with someone else.
The hitch didn't have a bracket to bolt the support from the spare tire carrier cross member to the hitch. Other than that it bolted to the frame perfectly and fits fine
The hitch lined up perfectly with the frame. I did have to open the hanging brackets with a 2 pound hammer in order for them to slide onto the frame. I suppose they bent a little during shipping. The videos were excellent source material.
Excellent quality and value. Shipping was next day, thanks Michelle V. Perfect fitment. Hardest part of the installation was removal of large bolts. Cheater bar needed.
Super fast service in shipping my order out.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/20/2024
Oh no! Thank you for letting us know. This can happen from time to time when the hitches are shipped to us or while being delivered to you. I will have our Customer Service team reach out to you. In the meantime we do have a FAQ that can help with installing the hitch right. Please see it below.
Helpful Links
faq-my-trailer-hitch-doesnt-fit.aspx