etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
(1139 reviews)
Price: $132.94
In Stock
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98865
Retail:$222.15
Our Price: $132.94
You Save: $89.21
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1139)
- Q & A (0)
- Photos
- Used (1)
etrailer Trailer Hitch - e98865
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- etrailer
- 350 lbs TW
- 4000 lbs WD GTW
- 400 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98865 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
This Product Fits The Following Vehicles
- 2005 - 2017 Chevrolet Equinox
- 2010 - 2017 GMC Terrain
- 2006 - 2009 Pontiac Torrent
- 2002 - 2003 Saturn Vue
- 2004 - 2007 Saturn Vue excluding Red Line
- 2004 - 2007 Saturn Vue Red Line
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98865
Average Customer Rating: 4.8 out of 5 stars (1137 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: Mike05/02/2023
The e98865 Trailer Hitch Receiver is perfect for my application. It is beautifully made and I don't think I'll have any trouble with it at all.
While it got a rough ride from the shipping company, and the corners of the end plates were protruding from the box sides, this didn't seem to have damaged the powder coat at all.
It is a very precise fit, which I really like, but that precise fit means you have to align it pretty well or it will catch and bind when you raise it into position under the car (that doesn't mean I think you should change it!). The method of installing the center bolts with the included feed wire worked perfectly; you just have to remember to unscrew it from the first bolt (rather than just pulling it off) to preserve its shape for the second one. I had no issues at all with the installation, and I did it entirely by myself with the vehicle on the ground. For those installing under these conditions, I recommend using jack stands to hold it up while you start hardware.
If I have any suggestions at all, I would say it would have helped me a little if the wire for installing the center bolts was maybe just 3" or so longer. I didn' really have any trouble with this, but a bit of extra length would have helped when threading it through the bumper tube to pick up to attach the bolts and rectangular washers. Even this in only the difference between damn near perfect and absolutely perfect.
I could have attached pictures, but excepr for the color of my 2016 Equinox (white) it's all identical to the video on the website.
by: Tanner05/11/2023
Very solid construction, awesome video online to help with installation. Extremely helpful to have the fish wire for threading through the frame.
A word of advice for anyone buying, make sure you have a wire brush to clean out the threads on your frame - mine were rusted so badly that we were lucky to ever get the bolts on.
Jenny N.
5/16/2023
Love the advice that is given. It is a great idea to use a wire brush like part # 814092 to clean out the weld nuts and make sure the bolts will thread in before you get started on the installation. Just be careful not to damage the threads.
Helpful Links
Tanner R.
5/12/2024
Still great one year later. Holding firm and does a great job supporting my bikes.
by: Brian 03/22/2024
The trailer hitch seems very well constructed and solid. I do think it would be good if going forward that the mounting hardware included a 12mm tap for the side holes of the frame. As it would of helped me with my installation.
by: Mike04/22/2024
2006 Chevrolet Equinox
It came in great condition but the box was pretty beat up and part of the hitch was exposed. I'd dock them a star for it but shipping was fast, free and it didn't get damaged. If the bolts weren't secured to the hitch though they would have fallen out.
It fit perfectly and installation was super easy. I used my hydraulic jack with a board to get it in place. Zipped in the bolts and was fishing in less than 2hrs from delivery. I didn't read the directions so I can't rate those.
Overall I'd buy from them again.
by: Ray04/14/2023
Prior to my ordering this for my 2006 Equinox, I checked underneath for the mounting hardware and found that all six points were welded nuts inside the frame. After ordering I began the immediate task of cleaning 17 years' worth of grim out. Soaking with WD40 overnight I had hoped to blow it all out with compressed air. Not happening!! I checked the diameter and hit upon a solution, and it may also work for you. I could not find any round metal brushes that would fit the hole and stay rigid enough to clean out the treads. I purchased several 10mm bore brushes from our local go to store for under $2 apiece. They fit and worked great to clean the threads out, (I used a pair of plyers in lieu of a handle due to space constrictions). Used Q-tips with some grease to lube the nuts to finish prep for installation of the hitch when it arrived.
I am 65 years old; I have one eye and an attitude that will not allow me to not start a project that I cannot finish, that said the hitched arrived in two days around 5:15pm. I immediately started to work, grabbed my handy wheeled floor jack and set to work. Placing it on the jack at the center point, lifted it up and it slid perfectly into the correct position and amazingly, all mounting holes were lined up! I started at the top on each side and placed the washers and bolts in place, then the side bottom bolts and washers, leaving them all loose. Removed the jack and mounted the two bolts and washers for the receiver portion. Tightened and torqued to specs (XXft lbs) I had it installed by 6:35pm.
etrailer not only provided the perfect wiring harness, but the trailer hitch also matched my vehicle to a "T"!! Very easy to install and is a Secure and solid constructed trailer hitch, the "BEST" priced and quick delivery, was just icing on the cake! I now can enjoy hauling my pop-up camper again and look forward to knowing that my new trailer hitch will provide years of great use into the future.
by: Dan10/13/2023
2016 Buick Enclave
Overall a great product. It would have been nice to know the tap/bolt size used to clean up the threads a head of time. My 2005 Chevy Equinox is older and had lots of rust accumulated between the welded nut holes nearest to the 2 inch receiver. I used a hammer to lightly tap all the rust free so the hitch would bolt up tight to the bumper.
by: Cindy03/28/2023
The etrailer Trailer Hitch Receiver fit my needs perfectly for my bike rack and was delivered quickly!
by: steve08/29/2023
Perfect fit on my 2014 Equinox. I used an M12x1.75 tap as recommended to clear threads. Will be using it mainly for a bike carrier. Only issue was running fish wire from left side, some debris from when vehicle was built interfered with pulling bolt and plate thru. I removed the lower bumper cover and used a pry bar to clear obstacle. Wasn't too difficult.
by: Gary08/22/2023
The packaging was very poor, one of the box looks like it was never stapled correctly, parts of the hitch were sticking out of the box. Fortunately the bag with the instructions and bolts was intact and appears complete. I have not installed the hitch yet will do that this weekend. The shipper never rang my doorbell they just dropped the box on the front porch. I only knew it was there when my son came home and told there was a box on front porch. I was happy with my previous order of a tire for my travel trailer. I think you need to watch the people packaging items for shipment so they do a better job. See attached pictures for reference.
by: Leland11/06/2023
Very, very easy install! What took the longest was cleaning the threads for the hitch mounting bolts. Recommend getting a tap to clean the threads.
by: Michael03/03/2024
Hitch works great, I use it often. Installation was straight forward. Everything lined up perfectly. It took a little patience to feed the 2 bolts through the holes in the car frame using the helical wire tool provided, but it came together perfectly. The other 4 bolts were easy.
by: Gerardo11/02/2022
2017 Chevrolet Equinox
While the hitch itself looks and feels great, the fasteners included did not work for my 2017 Equinox, I ended up having to go out and locate some M10 bolts for the frame rail weld nuts and obviously some smaller washers to make the installation safe, this was a real hassle and took me way longer to finish.
Gerardo
11/3/2023
Despite the issues with the fasteners during installation, it has been well worth it. After a year of wear an tear, the hitch has held up very nicely, there are obvious signs of use but after a small paint touch up last month in preparation for the snow, it still looks very good and performs just as if it was new.
by: Matthew 04/24/2024
2014 Chevrolet Equinox
Installation on a 2014 chevy equinox was a snap. Fits perfectly, looks good and works as expected.
by: Kian02/16/2024
Great trailer hitch highly recommend it. Fast shipping easy to install. Great instructions.
by: Drew04/05/2023
2007 Chevrolet Equinox
The hitch receiver is of excellent quality and would have gotten a 5 star, but only 2 of the bolts were the right size. Wasn't a problem as I have a plethora of grade 8 bolts in the garage. Don't let this steer you away as this is a very well made receiver.
by: Eric E02/21/2024
2015 GMC Terrain
Very happy with the hedge easy installation directions were simple and well written. I also come up with an idea after installing the hitch see the video I will share see what I did.
by: John wiley03/14/2024
It came with oversize bolts to the sub frame.Good thing I had a bucket of bolts.Would not have been able to get the job done.Not a happy camper.
by: Kenny 04/18/2024
Easy installation
by: CH10/03/2023
2012 GMC Terrain
The trailer hitch fit perfectly on my Terrain. IT took a little work to install, but went on perfectly with no issues. The only issue was the shipping. It would be helpful if the ends of the hitch were wrapped. The bars came out of the box on each end. The videos were very helpful.
by: Robert 10/03/2023
2014 Chevrolet Equinox
This is a very nice trailer hitch it’s nice and sturdy it’s a little heavy but I managed it myself using a floor jack.
by: David 11/30/2023
2013 Chevrolet Equinox
Perfect fit. Easy install with the help of a floor jack. Even a 80 year old can do it.
by: David10/19/2023
Extremely appreciative of the tech help I got from Phillip at etrailer
Knowledge was spot on with our vehicle and the products needed to install the hitch, wiring, and bracket.
by: Neil 05/11/2024
Perfect fit. Hard part was cleaning the holes in a 10 year old vehicle. Easy one person install with the assistance of a floor jack.
by: Chad 10/05/2023
Works great. Have a wheelchair holder on receiver and stuff tied down and it just holds it all. Holds to vehicle great. Perfect fit. Wish I had got it years ago.
by: Kurtis06/07/2022
2015 GMC Terrain
The installation of this hitch is very easy. My GMC Terrain is a 2015 so the side mounting holes were very rusty.FYI the person who attached the weld nuts to this vehicle was obviously Intoxicated none of the are centered in with the hole in the frame and none sit flat against the frame so they sit at a bit of an angle. This is not the fault of the hitch just a heads up to others. My solution was to screw a size smaller tap into the hole this does several things partially cleans out the threads clears hole all the way through and will give you an idea at what angle the weld nut is positioned. Then start the proper sized tap at that angle so as not to cross thread the nut. Next use the supplied fish wire to pull the two center bolts into place. Now you ready to install the hitch. I recommend putting the top bolt on each side first do not tighten. tip hitch up and start the nuts on the two center bolts tighten these bolts just so the hitch touches the frame. The lower side bolts should be lined up with slot in hitch you may have to give it a love tap with a hammer.screw lower side bolts in finger tight.Tighten two center bolts all the way then side bolts and you are done. It took about 4hrs. total including cleaning the thread holes and installing the wiring harness. I am in my late 50's so I am sure it can be done quicker. Highly recommend this hitch.
25
1139
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Troubleshooting Trailer Hitch Receiver Bolts That Won"t Install in Factory WeldnutsFor your 2013 Chevy Equinox, the # e98865 you bought (according to the invoice associated with your email) is the correct fit. It is a fit for 2005 to 2017 models so it is likely there is either grime in the weldnuts or powder coat overspray that is in the threads that needs to be cleaned up. I don't think the bolts are too big... which should be M12-1.75 x 40mm. I've attached a help article on cleaning the weldnuts to assist.
view full answer... - Towing Capacity, Trailer Hitch, and Wiring for a 2015 GMC Terrain SLE 4cylI took a look at the online version of the owner's manual for your 2015 GMC Terrain and it looks like if you have the 4-cylinder then your max trailer weight is 1,500 lbs if the trailer has brakes, and then that's reduced to 1,000 lbs if the trailer doesn't have brakes. You are correct that the etrailer Trailer Hitch # e98865 and the Tekonsha T-One Wiring # 118494 are compatible with your 2015 model year. If you'd like to mount the 4-Way connector next to your hitch receiver, then you also...
view full answer...
- Width of Receiver on 2" Trailer Hitch e98865The width of the receiver is exactly 2 inches on the etrailer Trailer Hitch Receiver # e98865. A 2-1/2 inch pinter cannot fit.
view full answer... - Replacement Hitch Installation Hardware for etrailer Trailer Hitch # e98865Hitch installation hardware is intended for a single use, so you are wise to obtain new hardware for installing your etrailer Trailer Hitch # e98865 in your 2014 GMC Terrain. All you need to do is enter the part number # RHK into the search box on our site, then enter your hitch number e98865 and we will prepare you a complete hardware kit. I have linked an installation video for this hitch in a 2014 Terrain as well as two articles that will provide useful tips for hitch installation. If...
view full answer... - What Is The Distance Between The Rear Frame Rails On A 2015 Chevrolet EquinoxThe distance between the inside edges of the rear frame rails on the 2015 Chevrolet Equinox is approximately 35". If you are looking for a rear hitch receiver compatible with this vehicle, I recommend using the etrailer Trailer Hitch Receiver part # e98865 as this hitch has the highest tongue weight (TW) and gross trailer weight (GTW) of any other hitch receivers confirmed as a fit for your vehicle. I have attached an installation video of this hitch on the same year vehicle for you....
view full answer... - Recommended Hitch With 2 Inch Receiver for 2022 Chevrolet Bolt EVFor a hitch with a 2" receiver for your 2022 Chevrolet Bolt EV I recommend the EcoHitch Hidden Trailer Hitch Receiver # 306-X7359. This has a maximum gross trailer weight of 2,000 lbs and maximum tongue weight of 300 lbs. Make sure to check your owner's manual to verify your towing capacity. As long as your bikes and bike rack do not exceed the max tongue weight this hitch will work well for you. It also has a concealed cross tube so only the receiver will be visible from the back. I...
view full answer... - What Sizes Bolts Are Needed To Install a Trailer Hitch On a 2015 Chevrolet EquinoxThere are a few different size bolts used to attach a trailer hitch to your 2015 Chevrolet Equinox. In order to make sure you get the correct ones, I would need to know exactly what trailer hitch you have as some do use different lengths for this application. For example, if you have the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76028 then you will need four 1/2-13x1.50 carriage bolts, four M12x1.75x2.0 hex head bolts, along with several other spacers/nuts/washers/fishwire etc....
view full answer... - Can Tongue Weight Capacity Be Added to Vehicle by Using Coil SumoSprings Custom Helper SpringsThank you for your purchase of etrailer 2-Inch Class III hitch # e98865 which is the highest-rated hitch offered for your 2014 Chevrolet Equinox. Although this hitch has a tongue weight (downward force) rating of 350-lbs some combinations of power chairs and carriers could exceed the hitch rating, or exceed the vehicle's own tongue weight (TW) rating. Vehicles like the Equinox that are primarily designed for passenger transport, rather than trailer towing, can have fairly low TW ratings....
view full answer... - Parts Needed to Install Pilot Chevy Hitch Cover # CR-007C on a 2016 Chevy Equinox LTIt sounds like maybe your 2016 Chevy Equinox might not have the factory tow package. If it doesn't you will need a 4-way at the rear of the vehicle to power the Pilot Chevy lighted trailer hitch cover # CR-007C. The wiring harness I recommend for your vehicle is the # 118494. If your vehicle came with the factory tow package you will not need anything more but the 4-way and a hitch at the back of the vehicle to power and hold the Pilot Chevy hitch cover. A great hitch for your vehicle...
view full answer... - Does etrailer Hitch for 2005 Saturn Vue Require Drilling in BumperThe etrailer hitch # e98865 that fits your 2005 Saturn Vue does not require any drilling or cutting of the rear bumper to install.
view full answer... - Availability of a Trailer Hitch that Will Fit a 2011 Chevy EquinoxThere are a couple of trailer hitches that have been confirmed to fit your 2011 Chevy Equinox, including the etrailer hitch, # e98865. You could also use Curt trailer hitch # C12291. This is a Class II, 1-1/4 inch trailer hitch that Curt has confirmed as a fit for the 2011 Chevy Equinox. I have included a link to the installation details. We can also use the Curt Trailer Hitch, # 13591. This is a Class III, 2 inch trailer hitch. I have included a link to the installation details and a...
view full answer... - Hitch and Wiring for my 2007 Chevrolet EquinoxThe etrailer Trailer Hitch Receiver part # e98865 is the hitch I would recommend. It offers a 3500 lb weight capacity which based off what I could find is the max your Equinox can haul. I do recommend confirming that in your owner's manual though. If you'll be pulling a trailer the Curt T-Connector Vehicle Wiring Harness part # C56012 will give you a 4-way connector to operate the lights on it.
view full answer... - Recommended Trailer Hitch and Wiring for 2015 Chevy EquinoxThe etrailer Trailer Hitch Receiver part # e98865 is a great option for a 2015 Chevrolet Equinox. It will work great with bike racks, cargo carriers, or even for towing a trailer. It has a class III rating with 2" receiver tube opening. In regard to wiring, I recommend the T-One Vehicle Wiring Harness part # 118494 which is a plug-in-play option that has a 4-way connector. The 4-way connector is the most popular option and what most trailers use. In regards to adding lights to a bike rack,...
view full answer... - How Much Can a 2015 Chevrolet Equinox TowThe maximum towing capacity for a 2015 Chevrolet Equinox will vary by engine size and if the trailer has brakes. If the trailer does not have brakes, then your maximum towing capacity is 1,000 lbs regardless of engine size but if the trailer does have brakes, then your maximum towing capacity is 1,500 lbs for models with the 2.4L I4 engine and 3,500 lbs for models with the 3.6L V6 engine. I have attached some parts below you will need to tow a trailer as well if you are interested. etrailer...
view full answer...
- Trailer Hitch Recommendation for a 2016 Chevy EquinoxThe etrailer hitch part # e98865 has been confirmed for your 2016 Chevy Equinox as a fit so I would recommend it for you. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball mount with the right rise...
view full answer... - How Do I Get Replacement Mounting Hardware for a Hitch on my 2011 Chevy EquinoxIn order to replace the mounting hardware on your etrailer Hitch # e98865 you will want to use the Replacement Hardware Kit for Trailer Hitches # RHK and put in the hitch number above- "e98865" where it asks for the "Hitch Item Number". This kit will allow you to replace the mounting hardware that normally comes with that particular hitch. Most hitches for a vehicle will mount in the same manner, using the same hardware; so any hitch that is a confirmed fit on your 2011 Chevy Equinox...
view full answer... - Recommended Trailer Hitch and Trailer Wiring for 2017 GMC TerrainWe have both Class III hitches with the 2 inch receiver tube or the Class II with the 1-1/4 inch receiver tube available for the 2017 Terrain. I'll typically recommend folks go with the 2 inch, as there are more hitch mounted accessories available and there isn't much of a price difference between the two. I'd recommend going with the etrailer brand # e98865 Class III hitch because it's very competitively priced and is just as high quality as the offerings from Curt and Draw-Tite. For the...
view full answer... - Trailer Hitch and Wiring Recommendation for 2015 Chevy EquinoxAs long as you stay under the weight capacity of the vehicle and all towing components you'd be fine. If the vehicle does not have a hitch we have the etrailer part # e98865 as a confirmed fit for the vehicle and it has a towing capacity of 3,500 lbs or 4,000 lbs if used with a weight distribution system. Even if the hitch is rated for the 4,000 pounds, you will still need to stay at 3,500 lbs or less because of your vehicle's capacity rating. You must adhere to the lowest rating. For...
view full answer... - Does Curt 2-inch Class III Hitch e98865 Include Required Mounting HardwareYes, the etrailer 2-inch Class III hitch # e98865 that fits your 2017 Chevrolet Equinox includes all of the hardware needed to mount it to your vehicle. No drilling is required. The linked written instructions provide step-by-step guidance and a list of the tools needed and the video I included for you shows you the whole process. A helpful article is included too. If you need 4-pole wiring for a trailer or accessory items, you can use part # 118264 if you have the factory tow package...
view full answer... - Experiencing Loud Noise Coming From Exhaust Hitting Trailer Hitch, How Do I Fix ThisEven when a hitch is installed properly we sometimes run into an issue of the exhaust coming into contact with the trailer hitch so we put together an article which provides a few different solutions. I have attached this article for you.
view full answer... - Hitch Recommendation for a 2016 GMC TerrainThe etrailer hitch part # e98865 has been confirmed for your 2016 Chevy Equinox as a fit so I would recommend it for you. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball mount with the right rise...
view full answer... - Difficulty Threading in Bolts to Install Class III Hitch on 2016 GMC TerrainWhat you mention is pretty common. In areas where salt and other corrosive chemicals are used on the roads in the winter, corrosion and other goop can get built up in the nuts that are welded up into the frame to receive the bolts. An easy way to clean those out would be to use a round profile wire brush along with some spray lubricant. The brush on a battery terminal cleaner like # DW00254 works very well. Spray a bunch of the lubricant up in there and give each nut a good scrub. In some...
view full answer... - Recommended Bike Rack for etrailer brand e98865 Class III Hitch on 2015 GMC TerrainFor a swinging type bike rack that allows 100% access to the rear of the vehicle, I'd recommend the RockyMounts BackStage, part # RKY10002 which can handle 2 bikes weighing up to 60 lbs each with tires up to 5 inches wide, as long as the bikes DO NOT have fenders. For a hanging type bike rack with a 4 bike capacity for bikes weighing up to 35 lbs apiece that offers 100% access to the rear of the vehicle, the SportRack # SR2415 Ridge Swing would be a good option. We might have other options...
view full answer... - Comparing Thule Apex XT 4-Bike and 5-Bike RacksIf you only plan on ever carrying 4 bikes and you're looking for ease of use then the Thule Apex XT 4-Bike Rack # TH9025XT is the better option. It has 28" arms and the cradles are spaced 7" apart which should allow you to load up all 4 Trek bikes just fine. The 5-Bike Apex XT # TH9026XT also has 28" long arms so the cradles are 5-1/2" apart which is the more traditional spacing, but it will make loading up your bikes a little more of a hassle. Your only real benefit of the 5-Bike version...
view full answer...
Do you have a question about this Trailer Hitch?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Jonathan Y
Updated by:
Wilson B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Bradley B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike
5/3/2024
After a year, Im as happy with this hitch receive as I was when I first installed it. It fits like a factory piece, but appears to be a bit heavierstronger than most. It looks good and performs about as well as I could hope or expect.