TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(1502 reviews)
Price: $387.71
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
- All Info
- Reviews (1502)
- Q & A (0)
- Photos
2016 Ford F-350 Super Duty - TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
- Rear Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with front tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
R3504 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Item # TLR3504
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Package not accepted
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLR3504
Average Customer Rating: 4.7 out of 5 stars (1499 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Don 01/21/2023
The Superhitch is an amazing product. Had a couple now. Expensive but you get what you pay for. Purchasing from E-trailer is very easy and they delivered the product quickly.
by: Jon K02/21/2019
Great product for rear camper mounts. Easy bolt-on addition to Torklift hitch.
by: Brad T03/25/2018
Magnum 30K & Camper Tiedowns TLF2022 & TLR3504
by: Doug 02/28/2024
Arrived earlier than expected. Kudos to Arthur D for all of his assistance!
by: Doug07/02/2023
Absolutely amazing!!! Love all the products I've purchased from etrailer.
As always.... Customer service is more than 5 star if I could give it.
by: Ralph 01/25/2024
Quinn was great to deal with and took care of my order.
by: Ernest 09/10/2022
Simple install with the torque lift heavy duty high box reciever
by: Gary R. 12/01/2016
I believe this review is for the rear tie-downs. I like this Torklift tie-down system a lot, works well even for my heavy Artic Fox camper. This one fits right into the current hitches Torklift is selling which are also quite useful. The instructions are easy to follow and the videos are helpful. Get the FastGuns as well, you'll appreciate them after just one use, and more every time you use them.
by: Matt 07/15/2023
They do what I want them to
by: Brad 09/26/2022
Wow what a difference compared to the competition that I’ve used before. The camper isn’t going anywhere with these tie downs!
by: Clinton 11/30/2022
Works well with super hitch
by: Kurt04/10/2022
Work good but rust, fade, chip and look bad very quickly. I take care of my vehicle and wash often but they look bad quickly.
Heather A.
4/21/2022
These are powder coated to resist rust but it is still a good idea to periodically spray them with fresh water if they are exposed to salt water or salt on the roads. I do recommend to lightly sand any surface rust off and cover those areas with a rust prevention spray paint.
by: Michael 07/08/2022
Fast delivery. Easy install. Install this during your super hitch install and save a step. 4 bolts and your done.
by: Michael 03/27/2021
Excellent rear camper tie downs! Super easy to install! Shipping was good as I paid for the 3 day delivery.
by: William 11/09/2020
10 minute install with superhitch magnu m.
by: Marc R06/06/2019
Solid mounting design. Strong hold and no signs of fatigue after 1 year of use.
Paint did chip after 6 months of road use.
by: Scott09/03/2019
Super easy install once you have the hitch in.
by: Wade06/22/2021
I have owned this for one year and it has worked flawlessly.
Wade
6/23/2022
one year and no problems.
by: Micheal 02/18/2021
Great fit and good instructions.
by: Gary01/20/2019
Good product great service
Slight problem clearing the exaust pipe
by: Chase12/03/2022
Delivered was late
by: Randy01/23/2016
Once I figured it out..it went together smoothly and does the job...
by: Big Camper06/06/2016
All products were great.
by: Duane & Shelly08/28/2019
Informative and helpful staff and all items showed promptly and as described. Great customer service!!
by: Justin 05/05/2024
25
1501
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- In Need Of Camping Tie-Downs For My 2022 Ford F-450 The only tie-downs we offer to fit your 2022 Ford F-450 are by TorkLift. Unfortunately, I would need more information to get you setup with the correct fit. For example, if you have running boards, or a step underneath truck bed, and a Torklift SuperHitch Magnum 30K, you would need the following items: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front, part # TLF2021 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, part # TLR3504 There are still some caveats. If you have factory...
view full answer... - Torklift Rear Mounts for my 2008 GMC Sierra 3500 8 Foot Bed with Torklift HitchThe TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLR3503 are the ones you want. They are designed for your 2008 GMC Sierra 3500 and will work with the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLC1205-30. The part # TLR3504 are for some of the Ford models.
view full answer... - What Are the Correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2019 Ford F-350 The correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs to go along with the TorkLift SuperHitch Magnum Trailer Hitch Receiver part # TLF1008-30 is part # TLR3504 for the rear and part # TLF2022 if you have a 6-3/4' bed or part # TLF2021 if you have an 8' bed for the front. For a set of tie-downs to use with these, I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9529-2-LK. I have also attached a link with a list of TorkLift SuperTruss...
view full answer... - TorkLift Tie-Downs That Fit for a 2017 Ford F-350 Super DutyThere are a few different tie-down fits for your 2017 Ford F-350 Super Duty with an 8' bed, but it all depends on if you have a board or step underneath the truck bed, and if you have a factory hitch or not. When aluminum is available it is a little more expensive but that's because it will last longer than the steel. Here are the list of available kits for your pickup: 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch Steel - # TLF2021 and # TLF3008 Aluminum...
view full answer... - TorkLift SuperHitch Magnum Receiver and Tie-Downs For a 2017 Ford F-350 Super Duty 8' BedYou will need a new TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1008-30 for your 2017 Ford F-350. The hitch cross bar is longer on the 2017 than the TorkLift Receiver # TLF1002-30 on your 2009 Ford F-350 so new side brackets will not allow you to use the current cross bar that you have. You will be able to use the same Rear TorkLift Custom Frame-Mounted Camper Tie-Downs # TLR3504 from your old truck but you will need new Front TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2021
view full answer...
- Recommended Trailer Hitch And Camper Tie Downs For 2019 Ford F-250 Towing Boat W/ In-Bed CamperFor your 2019 Ford F-350 Crew Cab I recommend using the TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" # TLF1008-30 to replace your factory trailer hitch receiver as it is already drilled for camper tie downs, and is compatible with the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 21" Long # TLE1521 or 42" # TLE1542 which will allow you to still tow your 5000lb boat. For camper tie downs you will need the # TLF2022...
view full answer... - Recommended 42" Extension To Tow Golf Cart W/ 2003 Ford F-250 With Truck Bed CamperI have a replacement trailer hitch receiver option for you, but since your 2003 Ford F-250 has a 2" trailer hitch receiver the longest extension available is the Hitch Extender for Brophy Hitch-Mounted Stairs - 2" Hitches - Black Powder Coated Steel # RHSE which is only 19" long. To get the 41" - 45" extension you are needing you will need to replace your factory trailer hitch receiver with the TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" # TLF1002-30...
view full answer... - Correct TorkLift Tie-Downs for 2004 Ford F-250 with SuperHitch Magnum Trailer HitchThe Rear TorkLift Tie-Downs # TLR3503 and # TLR3504 just have slightly different designs for different applications. Since you have the TorkLift SuperHitch Magnum # TLF1002-30 on your 2004 Ford F-250 you need the 3504. The front tie-down will depend on a few other things about your pickup: 8 Foot Bed - without board or step underneath truck bed - # TLF2011 and # TLR3504 8 Foot Bed - without board or step underneath truck bed - # TLF2011A and # TLR3504A (aluminum version) 8 Foot Bed - with...
view full answer... - How to Determine Correct TorkLift Rear Camper Tie-Downs for 2017 Ford F350Which hitch do you have on your truck? The correct rear tie-down will depend on if you have a factory, a TorkLift hitch or a hitch from a different manufacturer. Let's begin by ensuring you have the correct rear tie-down fit for the hitch you have installed. If it's a factory hitch, you'll want to use # TLF3008A for an 8 foot bed or a # TLF3008 for a 6-3/4 foot bed. The # TLR3504 will work for both bed lengths if the rear hitch is a TorkLift Super Magnum 30K hitch. If your hitch isn't...
view full answer... - Recommended TorkLift Truck Bed Camper Tie Downs for 2019 Ford F-350 Long BedTorklift offers two tie down options that will work with the way that your truck is configured, as long as you're not using the Torklift Hidden Power battery mounted under the bed and the truck doesn't have the factory flip-out bed steps. For a high level of corrosion resistance, I'd go with the aluminum/stainless steel construction of the Torklift Talon, part # TLF2021A for the front, and # TLF3008A for the rear. For powder coated steel, use # TLF2021 up front and # TLF3008 in the rear. If...
view full answer... - Which TorkLift Custom Frame-Mounted Camper Tie-Down For 2015 Ford F-350 DRWFor your 2015 Ford F-350 Dual Rear Wheel there are a few options depending on if you have the factory installed trailer hitch receiver, or an aftermarket trailer hitch receiver. If you have a factory installed trailer hitch receiver you will need the TorkLift Front Custom Frame-Mounted Camper Tie-Downs # TLF2016 and Rear # TLF3006. If you have an aftermarket trailer hitch receiver that is not made by TorkLift you will need the TorkLift Front Custom Frame-Mounted Camper Tie-Downs # TLF2016...
view full answer... - Determining Correct Frame Mount TorkLift Camper Tiedowns For 2019 Ford F-350 Dually With 8' BedThe Torklift Camper Tie Downs # TLF2021 and # TLR3504 are only the correct option for your 2019 Ford F-350 Super Duty Crew Cab Dually 8' Bed if you have the TorkLift SuperHitch Magnum 30k Trailer Hitch Receiver Installed. If you have the factory trailer hitch installed then you will need the # TLF2021 and # TLF3008, and if you have an aftermarket hitch that is NOT a TorkLift SuperHitch Magnum you will need the # TLF2021 and # TLR3500 instead. I included videos of the products mentioned...
view full answer... - TorkLift SuperHitch and Tie-Downs For a 2024 Ford F-350 Super DutyFirst you will need to replace your factory hitch on your 2024 Ford F-350 with the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TL27CR. Then you will be able to attach the Rear Tie-Downs # TLR3504 to their receiver. For the front we have the Tie-Downs # TL87CR which are for an 8' bed or the Tie-Downs # TL77CR for the shorter 6-3/4' bed. These will allow you to connect the Turnbuckles # TLS9529-2-LK to secure your slide in camper.
view full answer... - Torklift SuperHitch and Camper Tie Downs for 2013 Ford F-250If the plan is to use the 24 inch SuperTruss part # TLE1524 then you have to use a Torklift Superhitch # TLF1002-30 which then would require the rear Torklift camper tie downs # TLR3504 or for aluminum # TLR3504A which will weigh less and resist corrosion better. This will be a really solid and great route to go with and would be the best overall option.
view full answer... - Camper Tie-Downs For a 2005 Ford F-250 When Upgrading To a Torklift Magnum Trailer Hitch ReceiverI recommend changing from the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3500 that you have on your 2005 Ford F-250 with the aftermarket receiver to the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3504. These Tie-Downs # TLR3504 are custom fit for the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1002-30 and provide a solid base as it inserts into the receiver cross tube before bolting to the receiver. The other mounts are flush on the receiver which...
view full answer... - Frame Mounted Camper Tie-Downs for a 2016 Ford F-250In order to add a set of front and rear frame mounted camper tie downs to your 2016 Ford F-250, I would need to know the bed size, running board/bed step option, and trailer hitch type. For the front of your truck you will want to use the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2012 for 6-3/4' bed or part # TLF2016 for 8' beds. For the rear of your truck you will want to use the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF3006 if you have the factory trailer...
view full answer... - Camper Tie Downs for a 2002 Ford F-250 and Arctic Fox CamperThe Brophy tie downs # HSAB should only be mounted to make contact with the metal of the bed so I would not recommend them for your 2002 Ford F-250 unless you can remove those caps. Since you are trading in the camper for perhaps another camper the best solution is to use custom fit frame mounted camper tie downs. There are a few options depending on how your truck is configured. I have linked the main page for your truck. For example if you have an 8 foot bed without any board or step...
view full answer... - Custom Camper Tie-Downs for 2017 Ford F-350 Short Bed with TorkLift SuperHitch 30K Installed With the TorkLift 30K SuperHitch Magnum Trailer Hitch # TLF1008-30 installed on your 2017 Ford F-350 with the 6-3/4 foot bed the TorkLift Frame-Mounted Camper Tie-Downs # TLR3504 that you mentioned is indeed the correct set for just the rear. I have attached the written installation manuals for both the SuperHitch and Camper Tie-Downs that you can look through along with an install video. All of the brackets and hardware are included.
view full answer... - Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2019 Ford F-250 Short Bed with Factory HitchThe correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs for your 2019 Ford F-250 Short Bed with the Factory Hitch is going to be part # TLF2022 for the front and part # TLF3008 for the rear. If you also need turnbuckles then I recommend the TorkLift Locking FastGun Turnbuckles part # TLS9520-22-LK because they have locks for security, are made in the USA, and come with a lifetime warranty. They will be a perfect match for the above no-drill TorkLift Custom Frame-Mounted Camper...
view full answer... - Will TorkLift Tie Downs from a 2004 GMC Sierra 2500 Long Bed Fit a 2015 Sierra 3500 Long BedIt looks like the TorkLift tie downs for your old 2004 GMC Sierra 2500 long bed were # TLC2204 for the front and # TLR3503, # TLR3504, # TLC3206, or # TLR3501 for the rear. The 2015 GMC Sierra 3500 Crew Cab long bed uses # TLC2220A for the front and # TLC3212A for the rear if it is without board or step underneath truck bed and with a factory installed hitch or TorkLift SuperHitch or without a hitch or # TLC2219 and # TLR3500 if it is without board or step underneath truck bed and with...
view full answer... - Recommended Truck Bed Camper Tie-Downs and Turnbuckles for 2020 Ford F-250As you've found, unfortunately none of CR Brophy's tie downs are compatible with your truck, but we do offer tie-down fits from TorkLift. The correct tie-downs will depend on how your truck is equipped and will depend on the bed length, if the truck has wheel to wheel running boards or side steps that extend PAST the cab and under the truck bed and whether or not the truck has a rear hitch and who manufactured it. So (deep breath) here are the various fits for the above mentioned possible...
view full answer... - Camper Tie Down Options for a 2018 Ford F-350 with an 8 BedYou can use the Brophy Clamp On Camper Tie-Downs, like part # HSCP, on your 2018 Ford F-350 provided they will fit properly. These are a universal fit but you can determine a fit by comparing the dimensions in the attached photo with the bed on your truck. If you would rather use tie downs that connect to the frame of your vehicle then you can choose from the following options: 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch - # TLF2021 and #...
view full answer...
- Torklift Hitch, Tie Downs, and Super Truss Extension for 2017 Ford F-350 Super Duty If you have a short bed the tie downs you want is the part numbers # TLF2022 and # TLR3504. If instead you have a long bed you'd need the part numbers # TLF2021 and # TLR3504. Then for a hitch you would want the part # TLF1008-30 and for the SuperTruss you'd want the # TLE1542.
view full answer... - Hitch Extension, TorkLift SuperHitch Magnum, Camper Tie Downs, and Air Bags for a 2015 Ford F-250Since the bed on your 2015 Ford F-250 is 6-3/4 feet and the camper is 8 feet, 7 inches you are correct about needing an extension. Otherwise it is possible for the truck to make contact with the trailer when turning. There are several extensions that will word with the TorkLift SuperHitch Magnum Trailer Hitch # TLF1002-30 which does use a specific extension. I recommend the 21 inch long SuperTruss # TLE1521 because it combined with a ball mount will give you enough extension. You also...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Jonathan Y
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Sue W
Installed by:
Cole B
Installed by:
David F
Test Fit:
Shane T
Test Fit:
Clayton O
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don
1/27/2024
Love Torklift equipment. Expensive but worth it. Wouldnt buy anything else.