RoadMaster 6-Wire Trailer Connector - Vehicle End
(261 reviews)
Price: $15.03
In Stock
RoadMaster 6-Wire Trailer Connector - Vehicle End
Item # RM-910030-7
Retail:$37.63
Our Price: $15.03
You Save: 60%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (261)
- Q & A (0)
- Videos (11)
- Photos
Roadmaster Trailer Wiring - RM-910030-7
- Trailer Connectors
- Vehicle End Connector
- 6 Round
- Plug Only
- Roadmaster
Replacement socket fits RoadMaster 6-wire straight and Flexo-Coil electrical cords and includes a lid to keep the socket covered when it is not in use.
Features:
- Socket designed for RoadMaster 6-wire electrical cords
- Also works with standard 6-pole trailer connectors
- Cap included to cover the connector when not in use
910030-7 RoadMaster 6-Wire Connector Socket with Lid
Video of RoadMaster 6-Wire Trailer Connector - Vehicle End
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for RoadMaster 6-Wire Trailer Connector Installation - 2021 Ford Ranger
Hey everybody, Ryan here at trailer. Today on our 2021 Ford Ranger we're gonna be checking out and showing you how to install the RoadMaster six way round connector plug. So just to kind of give you guys an idea on what your connector plug will look like when you're not using it, whenever you're just kind of cruising around town, you can see it's gonna do a pretty good job of blending in. Thankfully the Ranger has a lot of different spots where we can mount this up and it's kind of dark in this area. So with the plug being black in color it does do a great job just kind of, blending in to the front of your Ranger so it don't stick out too bad. With that said, when you're not using it it does have a spring loaded cap and it's pretty tight actually.
And so that's going to have a seal on the bottom and sit up nice and tight against a connector plug itself and that's what's gonna help keep out any dirt, debris, moisture and things like that, which are in my opinion the number one demise for these plugs is corrosion. So with this cap on there that should really help that out. So whenever you are ready to use it and you hook up your flat tow components all you have left is your wiring. The connector plug is going to accept wires like this with the six way round. And when you plug these in what's nice is that connector plug is super tight, not loose and it really doesn't loosen up over time.
You see a ton of these come into the shop and they pretty much stay tight. So gives you a little confidence knowing hey it's not gonna wiggle around then my lights aren't gonna work when I'm driving down the road. With that said, I can think of a few different reasons why you would need just a connector plug. One of them being, it ended up getting damaged, maybe a rock flew up here, something and busted it or you could potentially over tighten the screws that hold it and then crack it or something like that. Or if you have an old kit that you're transferring over to a newer vehicle and just wanna be on the safe side, have a new connection up here.
Couple of other reasons, some kits, some wiring kits actually don't come with the connector plug. So you can pick this one up to try to complete the package. I've seen other kits that do have the connector plug and they're just kinda chinchy, so you could upgrade to a better one. Like I said, we have a ton of experience with these plugs in particular almost every flat tow set up that we do we end up using this. So they're reliable and we know they work out well.
So at the end of the day, a great replacement or even upgrade to your tow bar wiring setup. Now, as far as getting this hooked up super straight forward, everything is labeled and so you really can't, you really can't hook it up wrong. With that said why don't we go ahead pull into the garage and put it on together now. To get the connector plug hooked up we're gonna here at the front and we're gonna be hooking it up to our existing diode wiring here. I'm gonna set the plug aside for now kind of get everything else ready. You gotta take the rubber plug or the rubber dust cover rather off the connector plug, slide that over your wires kind of just push that back out of the way for now. And then we need to strip each individual wire back a little bit. You can then grab the connector plug. All right and if you look at the back of it we're gonna have several terminals. We're gonna be using four them and they are labeled. So this one here is labeled TM for taillight, brown wire will go to it. This one here is labeled GD for ground, so the white wire will go to it. We have LT for left turn, so the yellow wire there. RT for right turn, so the, green wire will go to it. And something I wanna mention if you happen to have a charge on it or something like that the majority of the time you'll hook that to the center, if that's your scenario. But that said, the other way these are gonna work is you're just gonna back the set screws out so you can use a small Phillips screwdriver run these out. I try not to take them out completely cause they being so small, they're easy to lose and even if you do find it they're kind of tricky to get started back in there again. So just back it out a little ways. And what's gonna happen is we can then hook each wire to the corresponding terminal. So we'll start with this one, which is TM for tail, put the brown wire in it. Kind of hold it in place and then tighten down that set screw. So I do that same thing for each individual wire. So this is what the wires look like when they're all hooked up. And what you can do is apply some dielectric grease to the terminals to help prevent any corrosion. I wait until the very end to do that, once I test it and make sure everything is working and our flat tow set up is complete that way if you have to make changes we don't have to deal with all that grease. So for the time being we'll just take our cover there slide that back over it. And then I'm gonna attach it to this bracket. It just needs a couple of screws. And then once we have it all secure, what we're able to do is we'll plug our wiring in, test it out and make sure all of our connections are hooked up properly and everything is functioning. So I went ahead plugged in to our test box. Now we can check all of our signals, try our tail lights, our left turn, our right turn, and our brake lights. And that'll finish up our look at and our installation of the RoadMaster six way round connector plug on our 2021 Ford Ranger..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
RoadMaster 6-Wire Trailer Connector - Vehicle End - RM-910030-7
Average Customer Rating: 4.7 out of 5 stars (261 Customer Reviews)
Replacement socket fits RoadMaster 6-wire straight and Flexo-Coil electrical cords and includes a lid to keep the socket covered when it is not in use.by: Carol09/02/2023
I explained to Roger (I believe was his name) that I have a Blue Ox tow bar and base plate, The base plate was installed along with the wiring kit, but did not include the wire to go from the front of the grill to the interior of my Jeep to plug in my RVi brake, and this is what he sent me. I'm attaching a picture of what I have on my vehicle. Not only was it the completely wrong part, but it arrived in damaged packaging which I did not open. Please send return instructions.
by: Joseph 04/22/2024
worked with the wiring harness
by: Timothy 03/06/2024
E trailer is the best. I was having trouble finding what I was looking for on line, so I called. She was able to send me a link and I had the part ordered in under 10 minutes.
by: Leehan03/25/2024
Bona Fide Roadmaster connector... Not a Counterfiet or knock-off
by: Ronmio07/04/2019
Towing Connections DON'T HAVE TO BE UGLY! (see photo)
I bought a new 2019 4x4 Jeep Cherokee Limited with the Active Drive II transmission. It included the Technology Group option with Adaptive Cruise Control, etc. I then bought the corresponding Roadmaster baseplate (521452-4) to couple with our old Falcon All-Terrain towbar from a previous Jeep.
The 6-PIN SOCKET (Roadmaster 910030-7) was mounted on the two stems that stick out from the baseplate's main receiver brace. However, I bent, angled, and shortened both stems so the socket would sit flush along the curved grill's centerline. I also drilled the holes deeper into the ends of the two stems so I could use longer (1"), #10, self-drilling screws. The screw heads were painted black.
All the WIRES were placed inside black, heat-shrink tubing and tucked out-of-sight using zip ties.
by: Rhonda 03/11/2024
Etrailer has always exceeded expectations. We love their products dependability and the great customer service.
by: Cj02/10/2024
Excellent service good videos to help i nstallation!
by: Alan04/17/2024
Wonderful product.
by: Janice02/18/2018
Received my package within days of ordering and I went back to the website for the video to install it! Thank you for the quick response and having videos available so that I could use, the video showed a much more professional appearance than how it had been done. I’ve enclosed a picture!
Janice
2/21/2019
So far it’s been working great!
by: Eric09/11/2023
You did not ship a Roadmaster but instead a no name made in china product. I emailed you guys yesterday and tomylynn wants photos. I installed it as I can’t wait for another as we travel full time. The item sent does work but not what I ordered.
by: Bill P.07/22/2023
This connector I installed is plastic, so be careful as to not tighten the mounting screws to tight it could crack, when connecting wires that you are putting the right wires in place, markings on back side of connector are very small hard to read, would be nice if they would send a diagram of where wires go.
by: Donald05/26/2023
We tow a 2022 Ford Escape behind our Winnebago motorhome. This wiring kit did the job for us. Everything working great!
by: Rick06/10/2022
It is mounted on the bull bar of my 2019 JLU Wrangler. The umbilical has never disconnected while underway. Very good quality.
by: Charles 08/30/2023
This was my original, but the pins got pushed out the back, so I tried another popular brand, only to find the all-metal assembly put the possibility of the wires shorting out within the "risky" category, so I went back to the non-metallic part, which won't "short" out and cause a problem. Fingers & toes.
by: Kevin 03/30/2023
Joshua contacted me to inform me that the Blue Ox 6pin connector was out of stock and recommended the Roadmaster connector in lieu to help complete my entire order of a baseplate and Hopkins wiring kit. I’ve used Etrailer several occasions in the past and will recommend Etrailer to anyone / everyone asking about my install. Thanks Joshua!
by: Dana02/10/2019
I purchased this along with the 477-1 base plate. Excellent products and base plate was vehicle specific. Bolted on with very little effort. Bolted into the main frame of my 2009 Ford Ranger FX4 pickup truck without any modifications. Would definitely recommend to anyone.
by: Gregory 04/19/2024
Just what was needed
by: Jeffrey 07/25/2023
This was purchased to replace a broken connector. Was exact fit. Swapping wires was easy. Thank you.
by: Grant05/16/2023
This is a piece of junk….one of the male plugs was broken and I checked the current on the others and no current passed through from one side of the plug to the other. Complete Junk….do not buy this product. I ended up going to [store] and getting a curt plug that worked just fine.
by: Carey07/29/2023
Install went very well. Instructions were spot on.
Very pleased with results.
Will be ordering more items to improve stability and control on my Class C.
by: Charles10/22/2022
I ordered and paid for a roadmaster 6 pin connector and was sent a made in China piece of junk. Etrailer has attempted to send the correct connector 2 additional times and have failed! Once sending the bracket I ordered and not the connector and then sending yet another China made piece of junk!!
Jenny N.
11/7/2022
I checked with Roadmaster and also our stock. The connector design has changed and no longer has the Roadmaster logo on it. We are working to update the pictures that we have on our site.
by: Mark06/09/2023
Installed this on our Chevy Equinox so the battery doesn't get drained while towing it. More convenient than pulling a fuse. Easy install. Highly recommended.
by: Ray04/25/2023
Upgraded to a new tow vehicle and etrailer had all of the components that I needed. I was working with a short timeframe to get the new vehicle adapted before hitting the road for the summer. All parts were delivered promptly and with no damages or missing parts.
by: Ralph06/14/2023
Produce was well described and arrived on time with clear installation instructions.
by: Ann 01/16/2024
Good Quality. Easy install. Works well.
25
260
Show More Reviews
See what our Experts say about this Roadmaster Trailer Wiring
- Recommended Bracket To Install 6-Way Connector On Front Of 2009 Honda CR-VTo install the RoadMaster 6-Wire Trailer Connector, part # RM-910030-7, you will need a bracket. The bracket I recommend is the Roadmaster Bent Electrical Socket Bracket, part # RM-910030-5. You need to find a flat surface that can support the connector and bracket.
view full answer... - Mounting Hole Dimensions On RoadMaster 6-Wire Trailer Connector The center-to-center distance of the mounting holes on the RoadMaster 6-Wire Trailer Connector, part # RM-910030-7 is 3-3/4 inches. The mounting holes can accommodate up 1/4 inch bolts when installing.
view full answer... - Tow Bar Wiring Kit for 2013 Lincoln MKZSince you have a 6-way connection that you want to plug tow bar wiring into the correct kit you'd need is the part # RM-152, for the 6-way socket part # RM-910030-7, and then for the mounting bracket # RM-910030-5.
view full answer... - Can A RoadMaster 6-Wire Trailer Connector Be Used To Replace The 7-Way On A Truck Bed CamperA truck bed camper will typically have a hardwired 7-way cable that plugs into the 7-way socket in your truck. If you were wanting to remove the hardwired cable from the camper and install the RoadMaster 6-Wire Trailer Connector # RM-910030-7 on the camper you could then use a 7-Wire to 6-Wire to connect your camper to the truck. If you'd prefer a bundle of both components then I recommend the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit # RM-146-7. If your camper setup differs then just...
view full answer... - Replacement Vehicle Side 6-Way for Blue Ox 7-Wire to 6-Wire, Coiled Electrical CordIt sounds like you might be looking for the RoadMaster 6-Wire Trailer Connector part # RM-910030-7 which is the same as the one that comes with the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord part # BX88206. If you need the umbilical end then you can use the RoadMaster 6-Wire Trailer Connector part # RM-910030-8.
view full answer... - 6-Wire Adapter Needed For A 2022 Jeep Wrangler It sounds like you need the RoadMaster 6-Wire Trailer Connector # RM-910030-7. This will allow you to cut off the ends of the 4 way and splice them into the connector so your tow vehicle and toad can connect via the 7 way to 6 way cord # BX88206 you mentioned. You also may need the Roadmaster Bent Electrical Socket Bracket # RM-910030-5 so you can mount the socket. I have included a review video as well as a FAQ on trailer wiring that you might find useful.
view full answer... - Which Diode Tow Bar Wiring Kit to Use When Already Have Coiled 7 Way to 6 WaySince you already have a coiled 7-way to 6-way adapter the diode kit part numbers you would want are part # RM-152 for the diodes and wiring for the towed vehicle side and then for the 6-way socket to mount on the front of your vehicle # RM-910030-7 and you'd be set.
view full answer... - How To Get A Diode Wiring Kit Without The 7-Wire To 6-Wire Coiled Cable To get all the diode wiring components without the coiled cable you'd have to use part # RM-152 and # RM-910030-7. This will give you the diodes, 4-pole wiring, and the 6-pole socket.
view full answer... - Roadmaster Universal Hy-Power Diode Wiring Kit to 6 Pole Round Connector on 2016 Kia SoulFirst off, thank you for your recent purchases! It looks like you're getting your 2016 Kia Soul ready for flat towing, which is a rather large undertaking, but we're here to help make that as easy as possible. I'll start off by saying that after looking at your orders, there is at least 1 part you'll probably need if you don't already have it-but I will get to that shortly. The wiring diagram you're going to use for the Hy-Power Diode Kit # RM-154 depends on the wiring of both your RV...
view full answer...
- Can I Purchase Roadmaster Diode Kit Without The Coiled AdapterYes, if you do not need the 7-way to 6-way coiled adapter cord you can purchase Diode Kit and wiring part # RM-152 and vehicle side 6-way plug part # RM-910030-7. This 6-way plug is the same plug that comes with the kit # RM-15267. The Diode kit part # RM-152 comes with 4 diodes and 30 feet of 4-wire. It also comes with the connectors, zip ties, 1 ring terminal and plastic loom to wire the vehicle for lights while flat towing. I have attached an installation video of the diode kit in...
view full answer... - Connecting Roadmaster Sterling Tow Bar Wiring Extension To Jeep with 4-Pin Round ConnectorI have a solution for you, but we do not have a pre-wired adapter to allow you to connect the 6-pin round plug from the tow bar to a 4-pin round plug on your Jeep. One solution is to replace the 4-pin round connector on your jeep with a 6-pin round socket, # RM-910030-7. The Sterling Tow Bar # RM-576 includes a 6-pin round socket that will work well to replace the 4-pin round socket on your Jeep. You can remove the wires from the 4-pin connector, taking the connector apart with a small...
view full answer...
- Could the Roadmaster Battery Charge Line Kit # RM-156-25 Have a Short When Not Towing? The circuit breaker for the Roadmaster Battery Charge Line Kit # RM-156-25 is only designed for power to flow in the one direction. It is unlikely that you will have a short in the RoadMaster 6-Wire Trailer Connector # RM-910030-7 unless it became damaged. In the event something did happen it will likely damage the circuit breaker as power is only designed to flow in the one direction.
view full answer... - Does Brake Relay Kit Need to Be Installed with Flat Tow Wiring on a 1999 Jeep Cherokee XJThe Roadmaster Tail Light Wiring Kit for Towed Vehicles # RM-152-LED is designed to wire right into the connector, like part # RM-910030-7, you'll install at the front of your 1999 Jeep Cherokee XJ so it actually bypasses the wiring on your Cherokee altogether. It receives signals and power directly from the motorhome connector. Since this bypasses you factory wiring you won't need a brake light relay kit. Attached are some videos for you to check out - let me know if you have any other...
view full answer... - Diode Tow Bar Wiring Kit for 2006 Hummer H3 Using Roadmaster Nighthawk Tow BarSince your Roadmaster Nighthawk # RM-676 comes with a coiled umbilical the diode wiring kit solution would be the Roadmaster part # RM-152 with the 6-way connector part # RM-910030-7 and bracket # RM-910030-5.
view full answer... - Recommended Adapter To Connect Motorhome To Towed Vehicle If you have a 7-way connector on your motorhome and a 6-pole connector on your tow vehicle like part # RM-910030-7, then the coiled adapter I recommend is part # HM47085. This has easy grip connectors and has a 3-ft cable. I have attached a link to a product review video you can check out.
view full answer... - Sealing Water From Getting Into 6-Way Connector On Flat Towed Vehicle ConnectionThe Deka Self-Fusing Auto Tape # DW04368 can be used to seal around the back of the RoadMaster 6-Wire Trailer Connector # RM-910030-7. The tape forms a permanent bond that is both airtight and waterproof and is resistant to UV rays, oil, and corrosive chemicals.
view full answer... - Can I Purchase Everything but the 8' Coiled Wire on the Roadmaster Diode 7-Wire to 6-Wire Kit?Yes, you can purchase the rest of the parts from the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267. Since you already have the 8' coiled wire all you would need are the following parts: Roadmaster Universal Hy-Power Diode Wiring Kit item # RM-152 RoadMaster 6-Wire Trailer Connector - Vehicle End item # RM-910030-7
view full answer... - Parts Needed To Convert A 4-Pole Vehicle Connector To A 6-Way For Flat TowingWhile there is not an adapter for your new car with a 4-pole, we do still have exactly what you need. You are going to have to cut off the existing 4-pole and re-wire it to the: -RoadMaster 6-Wire Trailer Connector # RM-910030-7. You may also need a bracket to secure the connector to the vehicle # RM-910030-5. Finally, if you need more wiring, you can use # 16-4B-1 which is sold by the foot.
view full answer... - Wiring Needed To Flat Tow A 2018 Ford F-150 Hi Scott, To get the motorhome's traffic signals through to your F-150's tail lights you'll also need some diodes and 4-pole wiring # RM-152 to go along with the # RM-910030-7, # RM-910030-5, and # RM-156-25. I do see that you ordered the # RM-15267 though so that would have the 4-pole wiring, diodes, 7-way cable, and 6-pole socket. With this kit you would still need the mounting bracket # RM-910030-5 and charge line # RM-156-25.
view full answer... - Can 4-Way on 2019 Jeep Wrangler Be Replaced With 6-Way for Flat TowingYes, you can replace the existing 4-way with a 6-way socket like the RoadMaster 6-Wire Trailer Connector - Vehicle End # RM-910030-7. If you need the 6-way to 7-way then you can use the # HM47053. If you need the diode kit with everything included then you can use the # RM-15267. I have attached some review and installation videos along with a diagram showing how to wire the 6-way for your reference.
view full answer...
- Tow-Bar Wiring For 2019 Jeep Grand CherokeeThe Roadmaster Universal Hy-Power Diode Wiring Kit, # RM-152 is a diode kit that has connectors and extension loop sold separately if that is what you are looking for. You can then use the RoadMaster 6-Wire Trailer Connector - Vehicle End, # RM-910030-7 in conjuction.
view full answer... - Tow Bar Recommendation to Flat Tow a 2011 GMC Terrain with a Roadmaster Sterling Tow BarThe EZ style base plates you have ordered are compatible with the Roadmaster Sterling Tow Bar, # RM-576, and nothing else is required to aid in ease of installation or removal. The tow bar comes with safety cables and a 6-pole connector. Both the towing and towed vehicles will need a RoadMaster 6-Wire Trailer Connector - Vehicle End, # RM-910030-7. Finally, you will need to check with the manufacturer for instructions on the proper procedure for towing your vehicle because some vehicles...
view full answer... - Light Kit Recommendation to Flat Tow a 2008 Buick EnclaveIn order to wire the Buick Enclave to be flat towed by the Alpine motorhome, I recommend a removable light kit like # RM-2120. Then all you would need is a 7-Way to 4-Way adapter like # PK12716. The vehicle manufacturer advises against splicing into the vehicle wiring so I do not recommend wiring in diodes or a separate bulb kit.
view full answer... - Correct Wiring Kit for Flat Towing 2018 Chevrolet MalibuThe wiring kit you need in order to flat tow your 2018 Chevrolet Malibu is the Roadmaster Universal Wiring Kit with Smart Diodes for Variable Voltage Incandescent Tail Lights # RO94FR. Since this does not come with a connector you can use the RoadMaster 6-Wire Trailer Connector - Vehicle End # RM-910030-7. Be sure to consult your vehicle owners manual for specific information on flat towing the vehicle. I have attached some installation videos for your reference.
view full answer...
Do you have a question about this Trailer Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Ryan G
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Jonathan Y
Video by:
Michael B
Expert Research:
Michael H
Expert Research:
Jeffrey L
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
9/7/2023
I wish that I could say that we always get it right. I will have our Customer Service team contact you to make arrangements for returns.