Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Triple 7K Trailer Axles
(213 reviews)
Price: $3,285.89
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Triple 7K Trailer Axles
Item # RM-2460-2570-3
Our Price: $3,285.89
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (213)
- Q & A (0)
- Photos
Roadmaster Trailer Leaf Spring Suspension - RM-2460-2570-3
- Equalizer Upgrade Kit
- Leaf Spring Replacement System
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- Triple Axle
- 7000 lbs
- Roadmaster
This leaf spring suspension kit prevents shock transfer between axles, increasing traction while braking by as much as 70 percent. Heavy-duty shocks reduce bouncing, chucking and porpoising of your trailer up to 50 percent. Fits 3" axles.
Features:
- Suspension upgrade system provides a smooth, comfortable towing experience
- Slipper leaf springs replace existing leaf springs
- Center hanger boxes replace standard equalizers
- Heavy-duty gas shocks absorb road vibration
- Center hanger boxes isolate leaf springs to prevent shock transfer between axles
- Independent axle operation increases traction by as much as 70 percent during braking
- Built-in rollers keep spring ends from hopping inside of box to create a smoother, quieter, more controlled ride
- Nitrogen-charged shock absorbers help to eliminate trailer bouncing, chucking, and porpoising
- Limit up-and-down motion of trailer on both compression and rebound
- Help to control trailer sway by limiting lateral movement
- Maintenance-free Never Fail bushings come pressed into spring eyes
- Constructed with molybdenum and graphite
- More durable than brass or nylon
- Simple, bolt-on installation
- Made in the USA
Specs:
- Application: triple-axle trailers
- Axle size: 3" diameter (typical 5,200-lb to 7,000-lb axle)
- Spring capacity: 3,500 lbs per spring
- Leaf spring dimensions: 27" long (from center of spring eye to end of spring) x 1-3/4" wide
- Eye diameter with bushing installed: 3/4" (9/16" without bushing)
- Leaf thickness: 3/8"
- Number of leaves: 4
- Shock length:
- Extended 17-1/2"
- Compressed: 11-1/2"
- Quantity:
- Slipper springs: 6
- Center hanger boxes: 4
- Shocks: 6
- Limited Lifetime Warranty
Note: Your existing U-bolts may not be long enough for this install. U-bolts also suffer from wear and tear, so we recommend changing the U-bolts during this installation.
Upgrade your current trailer suspension setup with the Comfort Ride system from Roadmaster. The Comfort Ride provides an improved towing experience for your triple-axle trailer. Unlike traditional equalizers, the center hanger boxes in this system prevent shock transfer between axles, creating a smoother ride. In order to absorb and dissipate any road-induced shock that occurs, heavy-duty shock absorbers are included.
Leaf Spring Setup
The front and rear springs that are included with this kit will attach to the hangers that are welded onto your trailer. The eye of the front spring will attach to your existing front hanger, and the eye of the rear spring will attach to the rear hanger. The flat slipper end of each spring will slide into one of the provided center hanger boxes. The 2 center springs will mount in the middle of the setup, attaching to the hanger boxes on either side.
This center hanger box differs from a traditional equalizer, which typically connects the springs on a triple-axle trailer. In a standard equalizer setup, any vibration or road-induced force gets transferred between the axles until it eventually dissipates. This occurs because standard equalizers are built with pivot points at their center. So each time the front axle hits a bump in the road, the movement of that axle causes the spring to jump. This pivots the equalizer, which transfers movement to the center and rear springs and, in turn, to the center and rear axles, creating an ongoing wave of motion.
With the Comfort Ride setup, the center hanger sits flush with your trailer frame, preventing any movement of the box itself. This isolates each spring, thus eliminating any connection between the axles. To ensure that each spring is still able to move along with the axle, preventing an overly stiff ride, the flat end of the spring mounts in the center hanger box between a roller and a safety bolt. Having a roller positioned above the flat end will keep the spring from hopping inside of the box. Any up-and-down motion the spring incurs will be translated into front-to-back motion to create a smoother, quieter, more controlled ride.
The independent axle operation will improve handling and braking performance as well. Axle roll up occurs when the trailer's rear tires are lifted off the ground while braking, resulting in weight and traction being lost on the rear tires. With the Comfort Ride system installed, tire traction increases by as much as 70 percent during braking because there is no axle roll up. The result is a safer, more comfortable towing experience.
Gas Shocks Absorb Road Vibration
Instead of transferring shock between axles, the Comfort Ride setup ensures that each spring freely absorbs and dissipates any road-induced force on its own. In order to do this, heavy-duty shocks are included.
The gas-powered springs inside of the shocks' sealed cylinders compress and extend as you drive. The compression and extension of the springs creates enough force to offset the amount of incoming force or vibration that occurs when you tow over rough or uneven terrain.
You'll experience up to a 50 percent reduction in the force that's transferred to your trailer while traveling on paved roads. You'll also receive up to a 76 percent reduction over cobblestones and a 94 percent reduction over gravel roads. This means improved handling, even over potholes and uneven pavement, and the contents of your trailer will stay in place during travel.
Many trailers will have shocks mounted at around a 40-degree angle, but this positioning doesn't compensate very well for the up-and-down movement of the trailer's suspension. Roadmaster's patented adjustable frame brackets are specifically designed to allow these shocks to be mounted at an optimum angle between 20 and 40 degrees. As a result, these shocks will have the leverage necessary to limit up-and-down and lateral movement during both compression and rebound.
Rigorous Testing Standards
This Comfort Ride system has endured rigorous testing to ensure its durability and longevity. This testing includes computerized Finite Element Analysis, which establishes guidelines to ensure superior product quality and safety. Roadmaster also tested these shock absorbers at the Navistar Proving Grounds, a private test facility that provides real-world handling and safety testing. The result is a safe, long-lasting product that you can trust.
Installation
Installation of the Comfort Ride system is fairly straightforward.
The eyes of the front and rear slipper springs attach to the welded hangers on your trailer's frame using your existing suspension bolts. The center hanger boxes bolt over your existing center hangers and secure in place with the provided hardware. Once the safety bolts and rollers are installed in the center boxes, just slide the slipper ends of the springs in so that they rest between the bolts and the rollers. The eye of each center spring will mount in the front most center hanger box with the included hardware, and its slipper end will position in the rear box in the same way as the other slipper ends.
To install the shocks, begin by replacing your U-bolt tie plates with the plates included in this kit. You will need to retain your existing U-bolts and nuts for installation. Once the tie plates are installed, bolt the upper mounting brackets to your trailer's frame with the included hardware. Some drilling is required when mounting the brackets to the frame. Finally, attach the shocks between the tie plates and the frame brackets.
2460 Roadmaster Comfort Ride Shock Absorbers - 3" Axles
2460-50 Roadmaster Comfort Ride Shock Absorbers - Triple Axle Add-On Kit- 3" Axles
2570 Roadmaster Comfort Ride Slipper Spring System - 7K Axle
2570-50 Roadmaster Comfort Ride Slipper Spring Triple Axle Add-On Kit- 3" Axles
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Defective
Customer Reviews
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Triple 7K Trailer Axles - RM-2460-2570-3
Average Customer Rating: 4.7 out of 5 stars (213 Customer Reviews)
This leaf spring suspension kit prevents shock transfer between axles, increasing traction while braking by as much as 70 percent. Heavy-duty shocks reduce bouncing, chucking and porpoising of your trailer up to 50 percent. Fits 3" axles.by: Michael 04/22/2023
Very happy with the product, still performing as expected,
Thanks you Allison K for all your help .
by: Larry 08/15/2022
by: 08/31/2022
by: Bob10/04/2022
Install wasn’t bad. Grand design welds a V bracket inside the spring hangers for more strength so that was my only challenge on install. This caused a problem on the center hanger as the spacer wouldn’t fit. Had to grind about a quarter inch off the spacer so it would fit as I could only bend the bottom of the hangers so much. Will be towing about 100 miles this weekend so it will be nice to hopefully not have broken drawers in the back of the trailer as well as shelves in the fridge door dislodged. I also did the X factor cross braces on the front and rear hangers for more strength. Will post back after we get more miles on it, but given all the other positive reviews I don’t think I’ll be unhappy.
by: Roger07/17/2023
Installed a year ago, I made a drilling template to help locate the frame mounting bracket screw holes. Installed a set on (2) fivers, spent average of 2.5 hours for total installation per fiver. Helped the ride of the trailer. Would certainly recommend the shock kit.
by: Mark John07/28/2023
7-28-2023
1. The impression from "people" was usually "why shocks on a camper", which I would answer "why shocks on your car".
2. The ride was much better; as you may imagine driving your car without shocks. And the sway was minimized & the braking effectiveness increase.
3. We've sold that RV and on our new one already planning the install; and including the wet bolts and mod on the leaf-spring hangers.
by: Tim P05/01/2024
All travel trailers should be equipped with shock absorbers. Roadmaster nailed it with the brackets which fit perfectly. Be sure to order the longer u bolts.
by: Jonathan01/25/2024
We installed these on our 2022 Riverstone Legacy 39RKFB and without a doubt they have saved us on broken rims (many have this issue) and the ride was an instant upgrade. We drove a 6500-mile trip over the summer to ZION and Rockies and no issues at all. I installed them myself and recommend them as an inexpensive solution to expensive independent suspension.
by: Ben08/09/2023
This is a great kit! Everything needed is included. Be sure to purchase the heavy duty wet bolt kit for the shackles.
by: Bruce H.04/10/2020
OMG! After having the trailer bottom out on the stock springs while traversing a RR crossing, this system has proven to be amazing. Returning from a VA campground I crossed multiple RR crossings and traveled some rough pavement. I found I had left a bottle of shower soap on the ledge in the shower! It was still there when I set up in my yard. Not possible with the stock suspension!
by: AJ01/15/2024
The suspension system is amazing! It feels like the 5th wheel is riding on coil springs. The shock absorbers make such a noticeable difference; why these aren't installed at the factory will forever puzzle me.
Installation was straight forward. The length and quality of current U-bolts allowed for reuse.
I was skeptical about the fasteners, until the first one was torqued to specs...it was soon apparent that the provided hardware was more than adequate for the job.
I wouldn't hesitate to purchase this system again, and I promote it as often as possible.
Thank you, and all the etrailer staff!
by: Gary 04/05/2024
After much research and evaluation I found the Road Master to be my first choice for our 2023 Grand Design Reflection Tandom Axle RV. The engineering, manufacturing and quality is demonstrated in this product. The components are heavy duty with clear instructions. I’ve not had the opportunity to install yet however before we embark on a 2 month tour, I’m confident in this added suspension package to assure a safe, comfortable ride.
by: Dave. H08/01/2020
Along with the new springs....everything works as advertised. Well satisfied. No complaints.
I had to modify the one set of shock brackets to fit, as I have raised the trailer 5 inches
to match up with the 4 inch raised truck.
Otherwise...no swaying....no bouncing........no problems.
Thanks etrailer for your help.
by: Mike 02/24/2024
Best upgrade you can do on your toy hauler! It’s a little stiff at first unloaded but man what a difference when fully loaded! Smithed out the ride tremendously even on the washboard highway! A huge piece of mind when comparing it to the stock set up. Definitely recommend it!
by: James 10/13/2023
I spent considerable time researching how to improve the towing experience of my 5th wheel camper without breaking the bank. This is an excellent product and it performed exactly as I had hoped. It improved my trailer's handling over the very rough roads we travel in just about every state in our country. If you are looking to improve your towing experience, then this is a reasonably priced product.
by: Charles 12/03/2023
I was looking for shock absorbers when I discovered this kit. I installed it in about a day and a half. The instructions are pretty good if you read them and follow them. We took the trailer about 100 miles last weekend. It seemed to ride smoother with this kit. Overall, I'm happy with it.
by: Matt07/12/2021
So far so good on my 2015 Open Range 3X427BHS!
Overall, the old suspension system was just rusted and worn out and the tires were a maximum of 1" apart, which made me really nervous while pulling. It was tough to remove, but nothing a little WD-40 and some praying couldn't fix!
Installation was pretty straight forward using the included directions and [online video] University. Looking forward to seeing how it rides this weekend on our next trip.
by: John11/03/2022
Great kit, really beefy high quality components, nice powder coating. Because my axles are above the leaf springs which I believe is relatively rare, the kit needed some modification, not too bad if you're handy and have additional tools. This kit is a no brainer for axles underneath leaf springs, pretty much bolt on from seeing the eTrailer videos, dramatically improved ride quality on my 20 mile test drive, looking forward to our next trip.
by: Boris11/25/2023
It works well, it was easy to install but the screws that go to the frame loosen with the vibration of the road even using Loctide 271 red, I had to stop on the road to tighten them every 2 hours. As soon as I returned home, I welded them and the problem was solved. The next problem was that the assembly was very close to the ground. I had to raise it about 2 inches more for safety. In conclusion, I give it 4 stars because the comfort is excellent and the price is a little high. taking into account all the extra work it took me until I got a proper balance.
by: Larry10/04/2023
My brother in law installed the slipper spring kit to replace a broken spring and equiflex on the left side of my 2018 solitude 384GK. We found it very easy to install and the written instructions and a couple of videos helped. We travelled from Phillipi WV to Arley Ala. after. I saw a very big difference in the handling and stability of the RV. Was very pleased with the results. I have not installed the shocks yet will do that when I get to Fla.
I purchased the kit from E trailer the service was excellent received everything 2 days earlier than expected, no damage or missing parts. I dealt with Ashley at E trailer she was extremally helpful and knowledgeable.
by: Johnny04/18/2019
Just finished installing the Roadmaster shock system on my Momentum 398M tri-axle. The kit arrived well packaged and all items were included. The instructions that come with it are pretty straight forward and easy to understand. This would probably be a lot quicker install with some helping hands, but I did it by myself in about 6 hours. The hardest part of the entire setup is all of the overhead drilling, but with a little redneck ingenuity I was able to make that bearable. As far as this kit goes, the ordering process and the outstanding customer service from Angela W, etrailer.com rocks!! This could be the start of a wonderful relationship..
by: David Austin07/05/2019
This is a great product, it smothered out my fifth wheel nearly eliminating the chucking.
by: Sandra03/28/2024
The cabinet doors aren't flying open and everything rides much smoother!
by: Greg 08/19/2022
Great addition to my camper. After being frustrated with broken leaf springs, stuff broken in the camper and being jarred from pot holes, I installed these shocks to help the ride. Easy to install (just takes time) and a great addition.
by: Ray11/27/2019
great product, I'm a fabrication/designer, well thought out and much better than the original factory suspension. I also added structural kickers to the suspension hangers to help side load generated while turning and not relying on the hangers for strength. I also replaced the original factory u bolts, might as well have all new going back on
25
207
Show More Reviews
See what our Experts say about this Roadmaster Trailer Leaf Spring Suspension
- Which Roadmaster Comfort Ride Leaf Spring Kit W/Shocks For 2021 Grand Design Momentum Toy HaulerI would be happy to help! Starting with the first question you are correct that due to the increased in demand in any and everything trailer related there has been issues getting replacement leaf springs, but I have not heard of any leaf spring failures caused by this. We do have a Roadmaster Comfort Ride Leaf Spring Suspension Kit W/ Shocks for 2021 Grand Design Momentum 5th Wheel Toy Hauler with triple 7K axles. You will need the # RM-2460-2570-3. These kits are great as they improve...
view full answer... - What's The Difference Between The Roadmaster Comfort Ride 2570 And 2570-50 Kits The 2570 is the Roadmaster Comfort Ride Slipper Spring System for tandem axle trailers and the 2570-50 is an add-on kit for triple axle trailers. For example, the # RM-2460-2570 you were looking at is for tandem axle trailers while the # RM-2460-2570-3 is the same kit but with that additional add-on kit for triple axle trailers.
view full answer... - Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers for 7K Axles on a 2013 PinnacleFor your 7K axles you will want to use the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570-3. This is compatible with your 3" diameter 7K axles and includes the shock absorbers (which must be used in conjunction with the spring kit). These will greatly increase the ride quality of your 2013 Pinnacle 5th wheel trailer.
view full answer... - How Many Hanger Boxes Come With the Roadmaster Comfort Ride Kit for Triple Axle TrailersThe Roadmaster Comfort Ride Leaf Spring Suspension Kit part # RM-2460-2570-3 will come with a total of six leaf spring packs and four center hanger boxes which will be needed to secure three axles under a trailer. There will be three leaf spring packs and two center hanger boxes on each side of the trailer. The rest of the required parts are all included for you.
view full answer... - Correct Roadmaster Comfort Ride Leaf Spring Suspension Kit for a 2013 Jayco Seismic 5th WheelThe correct Roadmaster Comfort Ride Leaf Spring Suspension Kit for a 2013 Jayco Seismic 5th Wheel with 6,000 lb axles is the Roadmaster Comfort Ride Leaf Spring Suspension Kit part # RM-2460-2570-3. It's rated for a bit more than what you have but it's the closest rated system and will not create any issues.
view full answer... - Recommended Suspension Enhancement For A 2008 Keystone Raptor Triple Axle Travel Trailer For your 2008 Keystone Raptor 3110 Travel Trailer I recommend the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Triple 7K Trailer Axles # RM-2460-2570-3. This leaf spring suspension kit prevents shock transfer between axles, increasing traction while braking by as much as 70 percent. Heavy-duty shocks reduce bouncing, chucking and porpoising of your trailer up to 50 percent. Fits 3" axles. The slipper leaf springs will replace your existing leaf springs and the...
view full answer... - How Wide are the Slipper Springs in the Roadmaster Comfort Ride Kits Actually in 2020 Roadmaster changed the width of their slipper springs that come with the Roadmaster Comfort Ride Systems # RM-2460-2570-3 from 2 inch 1-3/4 inch.
view full answer... - Could Roadmaster Comfort Ride System Fix Rear Axle Moving Closer to Middle AxleThat's an interesting problem you are having but there has to be a suspension component that is damaged, bent or flexed that is allowing the axle to move forward. I would look at the hangers to see if they maybe are bent or check to see if the axle is still attached to the leaf spring correctly. It almost sounds like the the axle has slid forward on the leaf spring which shouldn't be happening. There should be a pin on the leaf spring pack that holds it to the the u-bolt plate so this doesn't...
view full answer... - Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks For a Triple Axle Trailer 6K AxlesYou can use the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570-3 with your triple axle trailer on 6,000lb axles. Your 6,000lb axles are going to be the same 3" diameter as a 7,000lb axle. Do note that the heavier suspension will not increase your trailers capacity.
view full answer... - Will Roadmaster Comfort Ride Leaf Spring Suspension Kit - 7K Work If Leaf Springs Have 6 LeavesThe Roadmaster Comfort Ride Leaf Spring Suspension Kit part # RM-2460-2570-3 uses four-leaf spring packs which have a 3,500 lb capacity per side. In regards to the number of leaves within a spring pack, this is not always relevant to capacity since the individual leaves can have different thicknesses. For example, a four-leaf spring pack can have the same capacity as a six-leaf spring pack as the leaves in the four-leaf spring pack are thicker than the leaves in a six-leaf spring pack hence...
view full answer... - Fit of Roadmaster RM-2460-2570-3 Comfort Ride Suspension on Heartland Cyclone Triple Axle Toy HaulerWhich model Heartland Triple Axle Cyclone 5th Wheel toy hauler do you have? The Roadmaster # RM-2460-2570-3 Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers will work if your toy hauler has 7K axles. There isn't a database that would allow me to look up which axles your toy hauler is equipped with, but there are a few things to look for that will confirm your axle capacity. A 7K axle typically uses a 3 inch diameter axle tube with spindles that use a 25580 inner and 14125A outer...
view full answer... - Do All the Shocks of Roadmaster Comfort Ride System Have to be InstalledThe real benefit of the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570-3 is being able to have shocks installed on each axle to dampen the movement. Not running the shocks on the rear axle would not be recommended. Basically the suspension of just this axle would behave differently than the others which would cause handling and tire wear issues most likely plus diminish the ability of the system to smoothen out the ride quality. Realistically you'd...
view full answer... - Does Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers Change Ride HeightThe Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570-3 is not going to change the ride height of your fifth wheel. It will only improve the ride quality!
view full answer... - Which Roadmaster Comfort Ride Leaf Spring Suspension Kit Fits a 2008 Keystone Raptor 3600RL? Yes, the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570-3 is the correct kit for your 2008 Keystone Raptor 3600RL Toy Hauler.
view full answer... - Recommended Suspension Upgrade for 2019 Keystone Montana High Country 381THThe best all-inclusive suspension system we offer for a 2019 Keystone Montana High Country 381TH is the Roadmaster Comfort Ride Leaf Spring Suspension Kit with Shock Absorbers; part # RM-2460-2560-3 for 5k axles, part # RM-2460-2570-3 for 7k axles, or part # RM-2470-2580-3 for 8k axles. If you don't know your axle capacity, this will be printed on the axle tag in the center of the beam. The Roadmaster Comfort Ride provides independent axle operation for increased traction, spring keepers...
view full answer... - Comparing Roadmaster Comfort Ride to Air-Ride and Torsion Axles for Triple Axle 5th WheelThe Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570-3 is going to be the best upgrade option for your 5th wheel. This setup will create an independent suspension similar to torsion axles but with the added benefits of the shock absorbers. The Lippert Center Point by Trailair Air-Ride Suspension Upgrade # LC1565401 will keep your axles tied together through the equalizer, so you would lose that independent axle operation. These are also not compatible...
view full answer... - How Do I Select The Correct Roadmaster Comfort Ride Kit For My Triple Axle TrailerI can definitely help point you in the right direction. These comfort ride kits are not year, make and model specific. The kit you were looking at # RM-2470-2580-3 is made for a triple 8,000 lb axle trailer. 8K axles will have a 3-1/2" diameter round tube. If your trailer has triple 7,000 lb axles you will want the # RM-2460-2570-3 instead. This kit will be sized correctly for that setup with 3" round tube axles. Each axle should have a tag which shows the individual weight capacity,...
view full answer... - What is Axle Spacing for Roadmaster Triple Axle Comfort RideWhen the Roadmaster Triple Axle Comfort Ride # RM-2460-2570-3 is installed the axle spacing will be right at 35 inches. What that means for you is there is a chance you might have to move your hangers but if you have right 35 inches between axle centers like your dimensions would suggest you should be fine as-is.
view full answer...
- Can Roadmaster Comfort Ride System Install on Under Slung SetupYes, we've checked with Roadmaster in the past and they've confirmed for us that the Roadmaster Comfort Ride Leaf Spring Suspension Kits like the # RM-2470-2580-3 that you referenced can be used on under and over slung axle setups. I checked and we don't have any pictures of an underslung setup at this time.
view full answer... - Parts For Install On A Roadmaster Comfort Ride Leaf Springs System On 2019 Grand Design MomentumYour 2019 Grand Design Momentum 395m has a triple axle. We do have three options of the Roadmaster Comfort Ride Leaf Spring Suspension Kit. 5K Trailer Axles, part # RM-2460-2560-3 7K Trailer Axles, part # RM-2460-2570-3 8k, 3-1/2" Trailer Axles, part # RM-2470-2580-3 You will need to check your axles to see which kit is best for you. These kits do come with everything you need for the installation, except the tools. I have listed the tools you need below. General Hand Tools 12” Long...
view full answer... - Can Roadmaster Comfort Ride Kits Fit Under Slung Trailer AxlesYes, we've checked with Roadmaster in the past and they've confirmed for us that the Roadmaster Comfort Ride Leaf Spring Suspension Kits like the # RM-2470-2580-3 that you referenced can be used on under and over slung axle setups. The part # RM-2460-2570-3 is the kit that includes springs and shocks or for just a shock kit you'd want the part # RM-2470-3. I attached a review video for this for you to check out as well.
view full answer... - Can A Roadmaster Comfort Ride Suspension Be Installed A Trailer That Rides Slightly Nose High Yes, you can still install the Roadmaster Comfort Ride Leaf Spring Suspension Kit even though the trailer rides slightly nose high when coupled to the tow vehicle. When installing one of these kits you'll most likely need to get longer U-bolts since there typically aren't enough threads to accommodate the additional mounting brackets. To determine the right kit and U-bolts you'll need to know the capacity and diameter of your axles and how many axles your trailer has. 3.5k 2-3/8" Tandem...
view full answer... - Which Roadmaster Comfort Ride Kit and Disc Brake Kit Fits 2016 Dutchmen V-3002 W/ Triple 7k Axles?I would be happy to recommend the correct Roadmaster Comfort Ride Leaf Spring Suspension Kit W/ Shocks for your 2016 Dutchmen Voltage V-3002 with triple 7000lb Lippert axles but the # RM-2460-2580 you were looking at is for tandem axle trailers with 8000lb axles. For your trailer you will need the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Triple 7K Trailer Axles # RM-2460-2570-3 instead. This kit is designed to work with triple 7000lb axles like you have,...
view full answer... - What Is Needed To Install the Roadmaster Comfort Ride Leaf Spring Suspension KitYes, the Roadmaster Comfort Ride Leaf Spring Suspension Kit part # RM-2460-2570-3 comes with everything that you need for installation expect for tools. I have however listed the tools needed for you below. - General Hand Tools - 12” Long 5/16” Drill Bit - 9/16” Socket and Wrench - 3/4” Socket and Wrench - Torque Wrench - Blue Threadlocker part # LT37418 In regards to bearings and seals, the Lippert 7K Axle will use part # BK3-200.
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Sabrina W
Video by:
Dustin K
Video by:
Jonathan Y
Test Fit:
David F
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Larry
8/15/2023
Fantastic, 44foot toyhauler handles and rides so much better. Great product. Any dyi can do it.