What Is Needed To Install the Roadmaster Comfort Ride Leaf Spring Suspension Kit

Question

Question:

So this # RM-2460-2570-3 kit would include everything I would need for the installation right? I also have another question, do you know what bearing and seal kit I would need for this axle, I will include a picture with the info.

asked by: Dennis

0

Expert Reply:

Yes, the Roadmaster Comfort Ride Leaf Spring Suspension Kit part # RM-2460-2570-3 comes with everything that you need for installation expect for tools. I have however listed the tools needed for you below.

- General Hand Tools
- 12” Long 5/16” Drill Bit
- 9/16” Socket and Wrench
- 3/4” Socket and Wrench
- Torque Wrench
- Blue Threadlocker part # LT37418

In regards to bearings and seals, the Lippert 7K Axle will use part # BK3-200.

expert reply by: Conner L

0

click to enlarge

Answer 1

The number of leaves on a leaf spring is not the only determining factory in the amount of weight it can handle. The thickness of each leaf as well as what the leaf is made out of can affect the weight rating and performance of the spring. The…

view full answer...

Answer 2

Between the 7K #RM-2460-2570 and 8K #RM-2460-2580 Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks I recommend going with the 7K for your 2018 Vilano 5th wheel. It will give you the best ride possible since it's designed to work with…

view full answer...

Answer 3

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 is a great choice for upgrading the suspension on your 2018 Grand Design Solitude 310GK. You should not require any welding on the frame unless your current…

view full answer...

Answer 4

You can get the longer U-bolts here; I checked with Roadmaster, and the 2630 are simply 7 inch long U-bolts, so you can use the following: - 3" Round Trailer U-Bolts (Qty 2) #SP01-060 These are 7 inches long so they are the same, and for a…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 7

Thanks for the pictures! Since your 2022 Grand Design Reflection 303RLS came with the CRE3000 equalizers you will need three of the MORryde X-Factor Crossmember item #MR33WR. It looks like you have the standard 3" wide frame hanger so all of the…

view full answer...

Answer 8

You can use that upper hole on your hanger to install the #MR33WR. Make sure you don't tighten it down too much or you will pinch the leaf spring and it won't function properly. You will also need to make sure you have enough room to install…

view full answer...

What Is Needed To Install the Roadmaster Comfort Ride Leaf Spring Suspension Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching