Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks For a Triple Axle Trailer 6K Axles

Question

Question:

Is there a Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers for Triple 6K Trailer Axles?

asked by: Warren C

1

Helpful Expert Reply:

You can use the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570-3 with your triple axle trailer on 6,000lb axles. Your 6,000lb axles are going to be the same 3" diameter as a 7,000lb axle. Do note that the heavier suspension will not increase your trailers capacity.

expert reply by: Bud M

1

Answer 1

Thanks for all of the info you listed for your axles, based on that we know that the Roadmaster Comfort Ride kit you need is the part #RM-2460-2570 that you referenced. Lippert 6k axles like what you have are 3 inch in diameter.

view full answer...

Answer 2

Yes, the Roadmaster Comfort Ride Shock kit part #RM-2460-2570 will work great on your 2021 Grand Design Reflection 337RLS that has 6k axles currently. Based on the axle tag pics you sent in I can tell you would need an axle we currently do not carry…

view full answer...

Answer 3

Yep! Since your Grand Design 337RLS has 3 inch diameter Dexter axles that are 6k in capacity the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 is a correct fit and will give the trailer a much smoother ride…

view full answer...

Answer 4

I would be happy to help! Starting with the first question you are correct that due to the increased in demand in any and everything trailer related there has been issues getting replacement leaf springs, but I have not heard of any leaf spring…

view full answer...

Answer 5

Yes, we do have a triple axle Roadmaster Comfort Ride kit for 8k axles with the part #RM-2460-2580-3 which is for 3 inch diameter axles. Since you have 7k Dexter axles that would mean you have 3 inch diameter axles. This would make a huge difference…

view full answer...

Answer 6

I believe you are referring to the wear pad where the leaf springs make contact on the #RM-2460-2560. You can use an all purpose grease here at the point of contact. Assuming that is where the sound is coming from this should eliminate the squeaking.…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

You will definitely want to go with the Road Armor Shock Absorbing Equalizer Kit #LC696740 over the MORryde as the Road Armor has more travel and will provide a smoother ride. Then, in regards to shackle straps I'm not sure what you mean by which…

view full answer...

Answer 10

Sorry for any confusion that may have arose, but what you want is the U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles #APUBR-35. These are designed for 3 inch diameter, 8,000 lb axles and are compatible with the Roadmaster Comfort Ride Leaf…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks For a Triple Axle Trailer 6K Axles

Product Page this Question was Asked From

Continue Researching