Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This bar faucet ensures that the entire family has easy access to cold, clean drinking water. The faucet has durable, washerless stems that reduce daily wear and tear to extend the life of your faucet.
Features:
Specs:
This deck-mount faucet lets you upgrade the bar (or prep) faucet in your RV or camper. Using the standard NPSM inlet shanks, drop the new faucet and deck plate in place through the mounting holes of your existing faucet. Then hand-tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. The use of tub and tile caulk (not included) is required.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix Faucet's 4 inch dual handle RV, bar, and kitchen faucet. This is a chrome plastic construction. It's going to feature the dual acrylic handles for the hot and cold water functions. The spout is able to rotate. You can see there that it easily swings side to side. The flow rate is 2.2 gallons per minute.
It does have that low flow aerator on there. It's going to help it keep from wasting water. It's a 2 hole mount design. These connection points are for your hot and cold water lines. It does come with the plastic mounting base and the mount nuts for an easy installation. The distance between the connectors on center, it's going to measure 4 inches.
Each one's going to give us an outer diameter of 13/16ths of an inch with an inner diameter of a half inch. The length of those units are going to measure 2 inches long. To install this all you need to do is take the plastic nuts off of the unit, place the faucet down through the holes in the counter top. Then the plastic nuts thread onto the connection points here, but those thread on on the underside of the mounting surface. Then you tighten those up for a nice, tight, secure installation. The spout length, we took a measurement from the center of the unit to the center of where water comes out, and that gives us a measurement of 8 inches.
The base, this is going to give us a length measurement of around 6 to 6 and 1 quarter inches long by 2 and 1/8th of an inch wide or deep. From the bottom of the mounting surface to the top of the handles is about 3 inches. I also took a straight line measurement from what would be equivalent to the counter top height to the closest point of where the water comes out, and that's about 5 and 1 quarter inches. Overall depth from very back to very front's about 10 inches. It's from this area back here to this area right here. This unit also comes with your detailed installation instructions to help walk you through the install process step by step.
You can see here that it's going to walk you through. It's got diagrams there to help with the installation. On this side it's going to go over some operating instructions, cleaning tips, helpful hints, and some cautions. On the back it's got a detailed parts list. That's going to do it for today's look at the Phoenix Faucet's 4 inch dual handle RV, bar, and kitchen faucet.
Average Customer Rating: 4.7 out of 5 stars (290 Customer Reviews)
This bar faucet ensures that the entire family has easy access to cold, clean drinking water. The faucet has durable, washerless stems that reduce daily wear and tear to extend the life of your faucet.Bought this as an upgrade for an a-frame folding camper, 2006 Chalet Alpine. It was a direct swap, no modifications were needed. The screw-on spout is perfect, removing it allows the folding of the wall down. Great purchase!
Great faucet replaced the very small hardly useable faucet in my toy hauler pop up camper
Faucet bar appears very cheezy and I didn't realize it would be plastic. It also sits loose. I love the knobs but they turned up against the bar so I couldn't turn the water on full blast. About month later I noticed why the faucet had to be loose. It's so that the knobs could push the faucet up, while the knobs could slide underneath the faucet to turn on full blast. Quite weird. Anyway, it works.
after xmas to easter trailer build, very happy with everything i got from etrailer, inside and outside showers, 2nd toilet, 2nd cook and cleanup area, out of the weather garage for utv and motorcycle, added freezer to our travels, running off solar, still alot of work ahead, not done with you guys yet, thanks for your great resource!
I've bought 2 products from etrailer.com for my RV. Excellent quality, service, and they follow up with me to be sure I'm happy with my purchase.
One year later the faucet if working well in my '03 Coleman Niagara. Plug and play!
I have received your product the faucets look great, only one problem , the kitchen faucet is a 4" and I needed an 8" probably my fault so I will and back and exchange it for the one I need..
No complaints
Wonderful
The only problem is the one I bought a year ago has been leaking in the hot faucet for half the time I’ve had it……leaks only when I turn the hot water on. Hopefully this new one will last longer. I like the long neck.
Really like this faucet. The extra height allows much easier washing of larger items in our small sink. I also like the handles as opposed to knobs. Can turn on and off easily with the back of my hand instead of having to grab and twist.
Not satisfied. The end of the faucet was plastic and it was cracked and water sprayed all over my camper when I hooked it up to the water.
It's a great rv faucet. Perfect replacement for the oem faucet, and installed in only a few minutes.
I'm perfectly pleased with everything shipping was great and the product was exactly as described.***** I have a 1978 dodge sportsmen royal class C and the facet was a perfect match. *****
works great after a year of use.
Ordered this product to replace broken faucet in our motor home. Was an easy install, as hole spacing and fittings were an exact replacement for broken faucet. This was in large part due to etrailer.com's attention to providing as much information on their products as possible on their website ( showing actual dimensions and sizes ), so that I knew the product would fit without any other alterations to make it fit.
Would definitely recommend this product for anyone wanting an easy to install and inexpensive kitchen (galley) faucet replacement. The product and experience with etrailer exceeded my expectations.
Worked very well when we installed it. It was put in a customer's RV.
Bought to replace original faucet that was leaking at the counter top connectors. This faucet has a higher arch and fit perfectly. Easy to install also.
A great quality faucet.
The plastic hose very stiff and flexible
Perfect fit and easy change out
Great looking faucet, worth the money.... I purchased this for the high arch faucet and great looking handles!
We love it so much it pulls our RV kitchen together. And I have got to mention that the customer service is wonderful,
Do you have a question about this RV Faucet?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gloriak
4/4/2018
So heres a followup on the product... Its cheap plastic but does the job. If I would have seen it at the a store, it would not have been my choice though. It doesnt clear the knobs so it has a limited range. In my opinion it should be higher to clear those knobs. In hindsight, I should have gotten one high enough so I could fill a gallon jug.