Brophy Camper Tie Downs that Fit 2014 Ram 1500  

There are some exclusions for the Brophy camper tie downs #HSAB: Some dually trucks and most mid-size or import pickup trucks Pickups with drop-in bed liners, plastic bed rails, side-step beds, and double-wall beds 2003 Dodge 3/4-ton and 1/2-ton…

Yes, the Brophy Clamp On Camper Tie-Downs #HSAB is a universal fitting tie down so it will work great with your 2019 Ram 1500. You're also going to need a set of turnbuckles #TDHP to be able to secure your truck bed camper to the tie downs.…

I went out to the warehouse to take a look at the Brophy Camp On Camper Tie-Downs #HSAB referenced in your question. From the tie-down where it will clamp onto the inside of the bed rails to the outermost part of the unit, I measured a distance of…

The reason the manufacturers of the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item #HSAB have the plastic bed rail exemption is because depending on the thickness of the plastic bed rail you might not have…

It is very likely the Brophy Clamp On Camper Tie-Downs - Bed Mount #HSAB will fit your 1999 Dodge Ram 2500 with an 8 foot bed, but because this is a universal fit, there isn't any specific fit information for your truck, though I can help you…

Yes, the Brophy Clamp On Camper Tie Downs part #HSAB will fit the truck bed of your 2014 Ram 2500 short bed. We had a customer with a 2015 Ram similar to yours come back and say that these fit and worked well after some minor tweaking. The hardware…

There are some trucks that the Brophy Clamp On Camper Tie-Downs, part #HSAB will not fit and your 2005 F-150 is among that list. We do have tie-downs that will fit your truck but there are a few things that are required to make sure you get a good…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

Ryan, yes the Brophy Slide In Camper Tie-Downs #HSBP should work with your 2017 Chevrolet Silverado 3500, but we have not personally tested them with your truck so you'd have to check the diagram attached and see if they'd work for you. These…

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…