Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Durable matte finish resists rust and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.9 out of 5 stars (430 Customer Reviews)
This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Durable matte finish resists rust and creates a rugged look.Excellent product, poor installation instructions. I have included the photo of the part that had to be removed before I could install the hitch - despite emailing prior to purchase to ensure an exact fit, there was no instruction to remove that part. Once that part was removed, fit was perfect. No need to temporarily remove exhaust, despite recommendation in directions. The vehicle is brand new, Rubicon 4xe. I will only use the hitch for a bike or luggage carrier, but it is heavy duty and would handle more that the Jeeps towing capacity
Thomas M.
2/24/2023
Product is working great - heavy duty enough to tow a 3,500 pound little camper. Towing limitation is the Jeep, not the hitch!
The hitch is well-made and fits perfectly. I needed to drop the muffler to complete the installation as the bolts could not be fed into the holes. The videos mention that that probably wouldn't be necessary. I needed to find a video on YouTube showing how to drop the muffler. This install was made a little tougher crawling under the jeep and squeezing into the tight spaces. I used a motorcycle jack to hold the hitch in place while I got the bolts in. If you have access to a lift the installation would be a breeze. The install took less than an hour even with the extra steps.
I read the reviews paying close attention to the fact that I had a Jeep Wrangler with the tire on the rear. I chose this one because it said it would fit and allow bike racks with the tire in place. Item arrived and I easily installed it with no effort at all. Nothing had to be removed unlike the instructions. The picture below is minutes after installation. My Thule 4-bike rack would not slide into place as it was not long enough of a mount which is contrary to what the description said. I reached out to etrailer and was told that I could purchase an extender for $XX dollars more than what I bought the mount for. I contacted a local trailer supply store that had an extender for a lot less money and now it works......
You can only use two new bolt sets that come with kit, 2020 Jeep Sahara has extra plate that bolts need to be removed and reused along with two new bolts sets.
Mike
3/26/2024
Working perfect
Etrailer is very reliable. I have had nothing but good service and our products always arrive timely and when expected. I highly recommend e trailer to anyone looking for great service.
I wish I could provide a product review. But I was unable to install it given the mounting holes didn’t line up and are out of tolerance to my Jeep mounting holes. I tried to physically return it given I’m only a short drive away and I was told no in-person returns. And it made no sense for me to ship it back when I’m only 30min away. Crazy. About the most inefficient process I’ve ever heard. So, it sits in my garage……
Super easy to install. Looking forward to ordering additional accessories to maximize this product.
Great fit on our 2023 Wrangler Rubicon. I was able to perform the install without removing the exhaust like stated in the instructions.
I needed a hitch receiver that would fit my 2018 Jeep Wrangler JK and extend far enough that I could use by Kuat Sherpa 2.0 platform bike rack and clear the spare tire. This hitch worked perfectly and was an easy install.
Roger
10/12/2020
Exactly what I needed. I have used on many times and could not be more pleased with the hitch
Have not installed it yet but looks to be a perfect fit. Very nice finish, matches the stock steel bumpers nicely.
Quality product, very well made and fit perfectly on my 2021 Wrangler JL frame. Prompt delivery with shipping updates along the way. The parts bag was ripped open (during shipping I presume) but all the parts were in the box rattling around. The box itself was in perfect condition thank goodness!
Overall excellent product. Heavy duty, nicely finished and top-notch hardware. Instructions need updating. There are supposed to be 4-holes in the Jeep frame to mount this hitch. There are, but 2-are used by the bumper plate. Had to figure it out myself. Removed the 2-bolts, spread the plate away from the frame to allow the hitch to slide up over the frame. After that, no problem.
Gary
4/17/2023
Great. No issues. Working as intended.
Once I figured out the alignment of the bolts it was simple. The 2018 JL has two bolts and a bracket that are already there. U loosen, slide the hitch between the bracket. I reused the 2 stock bolts and used the 2 new bolts. Looks great! Total time for install about 40 mins with torque n the bolts. Havent used it yet but will let u know if there are any issues.
Victoria B.
8/14/2019
Some models will have existing hardware and a spacer installed in the hitch installation location. If your Jeep has these parts, you will want to remove the bolts and spacer, keeping the bolts for re-installation with the trailer hitch.
Works great with my 2021 Wrangler Sport. Gives decent clearance past the spare tire. Some rust spots already after one year that need to be touched up, but that’s what salted roads do to stuff in the northern states. Of course, I added the flag plug for extra bumper appeal.
Nice hitch. the install took about 30 mins on a 21 Sahara including getting tools out and putting them back.
The instructions are not overly clear about the bumper support that needs to be slid out so that the hitch can be install behind it. the instructions should read If this model has a bumper support installed where this hitch is to be installed. remove and reuse the factory 18mm bolts. Loosen the two 10mm bolts to slide the bracket forward enough to install the hitch, re-tighten once the hitch is installed. It should also show a diagram or picture in the instructions.
There is absolutely no need to mess with the exhaust - there is plenty of room to do the install with the exhaust in place.
Past the instructions - this is a nice hitch. the paint seems very nice and it seems to be made well. the welds look good and the 1/4"plate frame seems very stout. Its nice you don't have to remove or cut anything to do this install. Its also great to see quality SAE hardware vs the metric junk including in so many things now a days. This seems like a quality hitch.
We purchased this second hitch for our new jeep because we were so impressed with the first. Easy to install and very well built!
Like mentioned in previous posts, on my 2019 Moab, the two outer bolt holes have an L bracket attached already. The nuts are welded onto that bracket so no need to put a wrench on those. Slip the hitch between the steel and that bracket using the same two bolts (18mm) you just removed as well as two bolts and nuts supplied (3/4”) for the inner holes. Once again as mentioned by others, I didn’t need to move the muffler and the rubber mallet worked great to tap the hitch to line everything up perfectly.
Love the matte finish. Great quality.
Installation is close, if not a match, to the OEM product. With a little skill, there is no reason to drop the muffler.
Received the hitch in the morning, we installed it that afternoon. After watching an installation video from the etrailer website, my husband installed the hitch on my 2020 Jeep Wrangler JLU. It took him about an hour to complete. We bought the extended length hitch. The product fit perfectly and no need to remove the muffler.
Easy to install and fits perfectly on my 22 Jeep Wrangler. Works as expected.
Exactly what we wanted, hitch was very easy to put on. Very quick arrival. We ordered a wrong harness snd customer service was very quick and courteous to help us get a return label.
Would highly recommend this company.
Great product just as advertised. I appreciate the video showing how to install. Installation was smooth.
Great trailer hitch. Easy to install. The video on line was a great help as it tells you how to install and what you might run into as having to clear out the holes that the bolts run through. only added a few minutes to the job. Shipping was fast.
About a 10 minute installation time on my 2023 Jeep Wrangler. I did not have to move the muffler as the directions suggested. Torque wrench fit up into the space with no problem.
Do you have a question about this Trailer Hitch?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/3/2022
I researched and found that there is install note that needs to be added to the manual. Some models may have existing bolts attaching a plate with weldnuts on it. The hitch will need to be slid inbetween the bracket and the mounting tube witht he factory hardware reinstalled, securing the hitch.