Combo Bar 12" with 1-1/4" Trailer Hitch Receiver

See what our Experts say about this CURT Hitch Fabrication Parts

• Recommendation For a Quick Connect 1-1/4" Receiver To Attach On Tractor Drawbar?
  I think I will have a solution for you as the 1-1/4" Receiver Attachment # 391RR1 is only designed to lock into the block on a Stealth Hitches receiver. There would be no way to secure the end on your tractor. Instead we have the 6" # E-911 or 12" # E-912 receiver tubes. This would allow you to be able to fabricate a type of mount for the receiver or possibly weld it to a Curt Clevis Pin # C45803 which is a 1" diameter. You would need to add some steel to the front or rear which would prevent...
  view full answer...
• Dimensions of Curt 12 Inch Combo Bar
  The Curt Combo Bar 12" with 1-1/4" Trailer Hitch Receiver # E-912 has the outer dimension of 1-5/8 inch by 1-5/8 inch. The internal dimensions are 1-1/4 by 1-1/4 inch. That means the thickness of the metal is 3/16 inch not including the additional thickness on the front added for the collar.
  view full answer...
• Adapter for Flat Towing a Jeep and Carrying Bikes at the Same Time
  For flat towing a vehicle and carrying bikes and a bike rack at the same time you will need an adapter such as # RM-077-4 with a 4 inch rise/drop or # RM-077-2 with a 2 inch rise or drop.
  view full answer...
• Hitch Pin Hole Diameter on Curt Combo Bar # E-912
  The Curt 12" Combo Bar # E-912 referenced in your question features a 1/2 inch diameter hitch pin hole, which is standard for 1-1/4 inch receivers like this one. The hitch measures 12 inches long and features a forged collar. I have also attached a short video demonstration on this combo bar that you can check out.
  view full answer...
• Availability of 1-1/4-Inch Combo Bar for Hitch Fabrication on Antique Tractor
  I can offer you a better option for installing a 1-1/4-inch receiver tube on your antique tractor. Curt offers several lengths of their 1-1/4-inch combo bar, which is a raw steel product ready for weld-on installation. Part # E-911 is 6-inches long, part # E-912 is 12-inches long and part # C49524 is 24-inches long. One of these will cost far less than a custom-fit hitch. Also, if you used a custom hitch like the one for a Corvette any modifications would void the item's warranty, so...
  view full answer...
• Is There a 1-1/4 Trailer Hitch Receiver Available For a 2024 Volvo S60 Recharge?
  It appears that none of the aftermarket manufacturers have a hitch option for your 2024 Volvo S60. I recommend visiting a local fabrication shop in your area to determine if they can help you with a Weld-On Receiver # E-912. If they determine there is no way to install a hitch below your chassis you will want to consider using another means for transporting what you need. If you need to haul bikes the Yakima FullBack 2 # Y02634 or 3 # Y02633 bike rack which will mount to your trunk. These...
  view full answer...
• Timbren Axeless Suspension and Other Parts Needed to Build Lightweight Trailer
  Thanks for the detailed information! I will be happy to help you set up your trailer and give you accurate weights. We have an in house system that gives us specific product weights. The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Drop Spindle - Off-Road Tires - 2,000 lbs item # ASR2KHDS09 have a weight of 98 lbs. The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - item # AKHD-545-35-EZ-K The Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10"...
  view full answer...
• Availability Of a Class I Trailer Hitch Receiver For a 2008 Mercedes Benz SLK 280
  It appears you are going to have to have a receiver custom fabricated for your 2008 Mercedes Benz SLK 280. I was unable to find an aftermarket receiver confirmed to fit your SLK. You can use the Receiver Tube # E-912 to aid in the fabrication of a trailer hitch receiver. You will want to visit a local fabrication shop unless you are able to fabricate a receiver yourself and have it welded up.
  view full answer...
• External Dimensions of the Combo Bar 12" with 1-1/4" Trailer Hitch Receiver # E-912
  The outside dimensions of the Combo Bar 12" with 1-1/4" Trailer Hitch Receiver # E-912 are 1-5/8 inch by 1-5/8 inch. The internal dimensions are 1-1/4 by 1-1/4 inch.
  view full answer...
• Ball Mount and Balls for a Curt Trailer Hitch on a 2001 Mitsubishi Galant
  The Curt trailer hitch that fits your 2001 Mitsubishi Galant, # C11248, is meant to be used with ball mount # C45521 which can be used in the rise position (with the ball platform higher than the receiver opening). In this position it provides a 2-5/8 inch rise measured from the top of the receiver opening to the top of the ball platform. With Class I hitches like this you are supposed to use the ball mount specified by the hitch manufacturer or it can void the hitch warranty. For 1-7/8...
  view full answer...

Do you have a question about this Hitch Fabrication Part?