Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Curt bumper-mounted trailer hitch has a 2" x 2" receiver opening and bolts onto the underside of your pickup's rear step bumper. Bolt holes are 8-3/4" apart on center. Ideal for bike racks and cargo carriers.
Features:
Specs:
Note: Never exceed your bumper's gross towing weight.
Average Customer Rating: 4.8 out of 5 stars (38 Customer Reviews)
This Curt bumper-mounted trailer hitch has a 2" x 2" receiver opening and bolts onto the underside of your pickup's rear step bumper. Bolt holes are 8-3/4" apart on center. Ideal for bike racks and cargo carriers.THE HITCH WILL BE ATTACHED TO OUR 550 FORD 4WD EMERGENCY TRUCK ( VOLUNTEER FIRE DEPARTMENT ) I WILL NEED TO DRILL 2 ADDITIONAL HOLES IN THE STEP BUMPER. I LIKED THE ENDS THAT YOU ATTACH THE SAFETY CHAINS. THE TRUCK WILL PULL OUR TRAILER WITH OUR TERREX ATV
HAVING THE CORRECT HARDWARE IN THE BOX IS GREAT
Solid, quality product. The bolt threads were a bit "short" so I had to buy some big washers to make up the distance and allow the nuts to fully tighten. Also, I looked up the torque specs on those grade 8 bolts to get the proper torque rather than what the instructions said: "Make sure to tighten them really tight". Overall pleased.
The bumper hitch was exactly what I needed. It is perfect for attaching a wheelchair carrier to the step bumper of my Silverado pick-up. After I placed my order I recieved a confirming e-mail of the order. I recieved an e-mail the next day informing me that my order had shipped along with the tracking number. I recieved my order a few days later and installed it on my bumper in barely 5 minutes! I will definitely use E-Trailer for all future trailer hitch needs.
Very prompt delivery! Product is just as described. I will try / do the install tomorrow and follow up at that time. I do not expect any issues, but you never know till its complete. This is hopeful is going to lower the hitch height to enable the level towing of a vintage trailer.
Jim S.
1/6/2018
Works grate! Did just what I needed.
Product was easy to locate, webset easy to use. Hitch installed easily, Did require slight mount adjustment by drilling. The product description did give adequate forewarning of mounting adjustment. Spacers included were great. Would recommend “ETRAILER”!
Larry L.
5/2/2019
All is well
For the price this is well worth it. The staff was very fast to respond to any questions i had. I am only using this for a bike rack and it worked perfectly. If you have to drill all holes in your bumper, make sure you are using a drill with a cord. The batteries will not last. I would def buy another product from this firm. This was a great quality product.
Jack L.
5/13/2015
After a brutal winter the product is still holding up great.
Super fast shipping and service. This unit fit my aftermarket step bumper just fine. I only had to drill two holes for the included 1/2 inch bolts. The 3/4 inch bolts lined up perfectly. I wish all things were this simple.
William
5/29/2020
Hitch is great. No signs of rust on the finish or bolts.
The shipping was quicker than I expected. However, the bumper hitch didn't work well with my 1993 Nissan pickup with its step bumper. My bumper is too light and the mounting surface of the E-3S hitch is bowed, so it tended to try to pull my bumper apart in tightening. If you have a heavy bumper plate to bolt the hitch to, it should work great.
Nice heavy hitch, installed easy and worked great.
Would recommend it to anyone looking for a light trailer bumper hitch.
I'm building my own trailer hitch for my classic 1955 F350. I like this receiver because it'll provide a large, flat base to weld to the 2x4 heavy steel tube.
The hitch is perfect for hauling anything we toss in the trailer from hay to wood to dwelling clean-outs, it has earned its value.
The finish is great, I was going to weld this to the front of my tractor, but know I am going to weld mountig brackets to the tractor so I can bolt it on and not mess up the powder coating.
Very easy to install, took less than 30 minutes. I wasn't sure of the grade of bolts that were included, so I upgraded to Grade 8 bolts. I'm very pleased with hitch and have already put it to the test.
The hitch is going on a one off build and is exactly what I needed. WELL MADE Only Mother natures delivery of 12" of snow delayed your delivery!
Like my other orders from etrailer I received exactly what was ordered packaged correctly and on time. Thank you etrailer
Perfect for the application
Guy
1/24/2023
All the videos that are available at e-trailer make the installation super easy. The product is performing perfectly.
A lot of bang for the buck, what's not to like.
great QUALITY as well.
A lot of bang for the buck, what's not to like.
great QUALITY as well.
Ordered item online- painless
Received item quickly, and was well packed.
Installed easily, very good quality for the cost.
Exactly as I expected.
Pleasure doing business with this company
SUPER PRODUCT,FAST SHIPPING,WORKS GREAT,EASY TO INSTALL, WILL BUY FROM AGAIN!!!!!
Great, product worked very well for my needs
Solid built product. Grade 8 bolts longer than needed. Had to change out for 2 1/2 inch bolts.
Information on website made choosing the right product easy. Quick shipping and notification in a great product
Excellent product, workds great.
Do you have a question about this Bumper Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave B.
8/1/2015
i need hitch like e-3s for my 2002 silverado i would have to drill in bumper