Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(10 reviews)
Price: $260.77
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C69VV
Retail:$308.95
Our Price: $260.77
You Save: $48.18
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (10)
- Q & A (0)
- Photos
CURT Trailer Hitch - C69VV
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Visible Cross Tube
- CURT
- 350 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Installation hardware and instructions are included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13570 CURT Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2020 - 2024 Subaru Legacy
- 2020 - 2024 Subaru Outback Wagon
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C69VV
Average Customer Rating: 4.2 out of 5 stars (10 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Jim03/02/2024
2024 Subaru Outback Wagon
Trailer hitch looks good. The box was really damaged in transport. It had a very large hole in the side. We checked the hitch and didn't show any damage. The attachments were securely attached.
by: Mei04/06/2024
Subaru Outback Wagon
Easy to install, about 1 hour made the job done.for my 2023 Subaru outback touring.
by: Terry09/22/2023
The install instructions and pictures are much better for the draw-tite hitch which mounts in exactly the same way. The Curt only includes two wires to pull the plates and screws where the draw-tite gives you all four. The nuts are barely wider than the holes in the hitch and if not perfectly aligned will slip off the edge of the hole Draw-tite provides wider washers between the nut and hitch. If I had realized these issues before ordering I would have ordered the draw-tite even though it was not guaranteed to fit my year Outback
by: Justin 09/04/2023
Subaru
Install was smooth and easy. Everything fit better than I thought it would. I did the install in a dirt driveway without jacking up the car and the only issue I ran into was that laying on rocks is not comfortable. Hint for everyone - look up the install for your model year on youtube becaue Subaru changed the location of the trailer plug-in. I did substitute the washers that came in the package with a thicker, wider washer for more surface area.
by: William 08/31/2023
by: Terry 09/10/2023
by: Dan 10/11/2023
by: Scott10/19/2023
2021 Subaru Outback Wagon
by: Peter 12/29/2023
by: Dan 11/23/2023
10
10
See what our Experts say about this CURT Trailer Hitch
- 2022 Subaru Outback Wagon Tow Package RecommendationThe difference between the Curt 13494, our part # C67JR, and 13570, our part # C69VV, trailer hitches is that 13494 has a hidden crosstube so all you see is the receiver, while the 13570 is more of a "classic" hitch that has the receiver level with the crosstube. I recommend the 13494 because it looks cleaner and it has better ground clearance. For a complete 2022 Subaru Outback Wagon towing setup with a functioning 7-Way I recommend the following: - Curt Trailer Hitch # C67JR (same...
view full answer...
- Recommended Hitch for a 2023 Subaru OutbackFor your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item # C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because it is an easy install and anyone with a basic set of tools and knowledge can install it in a short amount of time. I have attached a couple of pictures below along with the instructions so you can see what this hitch looks like installed and how to do it. If...
view full answer...
- Does the Curt Hitch C69VV Fit a 2024 Subaru Legacy?Yes, it does! The Curt Hitch item # C69VV has been confirmed to fit the 2024 Subaru Legacy. This hitch is custom fit and bolts to your Subaru with included hardware. It is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. I have linked an installation video so you can see how to get this hitch set up. If you are planning on towing you will also need a wiring harness item # C79CR and a ball mount kit item # C45534.
view full answer... - Will The Curt C69VV Fit A 2024 Subaru Outback Wagon Touring Model?Yes, the Curt class 3 hitch # C69VV will indeed fit your 2024 Subaru Outback Wagon Touring model. According to the manufacturer this will fit all models of the 2024 Outback Wagon. Keep in mind that installation will require trimming/modification of the heat shield.
view full answer... - What is the Highest Capacity Hitch for a 2024 Subaru Outback?The hitch with the highest capacity for the 2024 Subaru Outback is the Draw-Tite item # DT73RR. This hitch is custom fit and bolts to your Subaru with included hardware. It is a class III hitch with a 2" receiver that has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight. I have linked an installation video below so you can see how to get this hitch set up. Please note that the capacity of the hitch may be higher than the capacity of your car. You will want to verify what...
view full answer... - Easiest Install Trailer Hitch For 2024 Subaru OutbackThe trailer hitch that fits your 2024 Subaru Outback that is the easiest to install is the Curt Trailer Hitch Receiver # C69VV. Unlike other options, this hitch does not require removal of the rear bumper, which is why it isn't as difficult to put on as other hitches. If you plan on using this hitch for towing and need a wiring harness, the correct part for your '24 Outback is the T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56040.
view full answer... - Is Bumper Fascia Cutting Needed For 2024 Subaru Outback to Install Curt Trailer Hitch C69VVNope, there is no cutting or trimming of the bumper fascia whatsoever on your 2024 Subaru Outback when installing the Curt Trailer Hitch Receiver # C69VV. There is also no drilling into the frame of your Outback either, which I only mention because it is a fairly common question so I just wanted to address it real quick. Additionally, if you also need a 4-way trailer wiring harness the correct part for your '24 Outback is the T-Connector Vehicle Wiring Harness # C56040.
view full answer... - Does Curt 2 Inch Trailer Hitch Fit 2024 Subaru Outback PremiumI checked directly with Curt for you and can verify that both of their Class III 2 inch trailer hitches fit your 2024 Subaru Outback Premium: - Curt Trailer Hitch Receiver # C67JR - Curt Trailer Hitch Receiver # C69VV The difference between these is the # C67JR has a concealed crosstube while the # C69VV has a crosstube that hangs below the bumper so you can choose which one you like best. If you also need a 4-way trailer wiring harness the correct part for your '24 Outback is the ...
view full answer... - Recommended Trailer Hitch For A 2024 Subaru Outback TouringThe Curt class 3 hitch # C69VV will fit your 2024 Subaru Outback Touring model. According to the manufacturer this will fit all models of the 2024 Outback. Keep in mind that installation will require trimming/modification of the heat shield.
view full answer... - Trailer Hitch Receiver and 4-Way Flat Wiring Harness For a 2024 Subaru Outback WagonYes, the Curt Trailer Hitch Reciever # C69VV has been confirmed to fit your 2024 Subaru Outback. This receiver requires no drilling or welding onto your frame for a simple bolt on installation. You will have to drill an hole or 2 in the muffler heat shield to give clearance for the mounting plates. I have linked the installation instructions below so you can see this step. I do recommend installing the Curt T-Connector Vehicle Wiring Harness # C56040 when you install the receiver. This...
view full answer... - Does the Bumper Need to Be Removed to Install the etrailer e25TR Hitch on a 2024 Subaru Outback?Yes, it does! The crosstube of the etrailer Hitch item # e25TR installs completely behind the rear bumper cover on your 2024 Subaru Outback so you do have to remove it. The crosstube being hidden is one of the best features of the etrailer hitch. Installing it like this leaves only the 2" receiver exposed. This not only looks better it helps with ground clearance. I have linked an installation video below along with the instructions so you can see how this hitch gets set up. If you...
view full answer... - What Is The Install Difficulty Of The Curt C69VV Hitch For A 2024 Subaru OutbackHey Mark that is a really keen observation. I got with our installers to make sure there was not a key piece of information I was missing here. To summarize, the Curt # C69VV for the 2024 Subaru Outback Wagon should be shown as a 5/10 install difficulty. The installation process will effectively be identical to that of the Draw-Tite # DT73RR that you mentioned which is also (correctly) listed as a 5/10. We are going to work on correcting this on the site, and thank you for bringing this...
view full answer... - Installation of Curt Trailer Hitch Receiver on 2024 Subaru OutbackThe Curt Trailer Hitch Receiver # C69VV does fit the 2024 Subaru Outback Wilderness. Ground clearance will be further reduced at the rear compared to other hitches for the Outback since it has a visible cross tube. Bumper removal is not required, but you will have to lower the exhaust as well as cut a hole in the heat shield. The installation of a hitch like the # e25TR is more difficult but you will probably be happier with it in the end, especially since you only have to install the...
view full answer... - Why do Class 3 Curt Trailer Hitches For 2024 Subaru Outback Have Lower Ratings Than Previous YearsThe Class III hitches are measured by having a 2 inch hitch receiver and weight ratings between 3,500 lbs and 8,000 lbs, which is what both of the Curt hitches for your 2024 Subaru Outback are, the visible crosstube Curt Trailer Hitch Receiver # C69VV and concealed crosstube Curt Trailer Hitch Receiver # C67JR. Both are rated for 3,500 lbs towing and 350 lbs of tongue weight like you mentioned. A Class II hitch can also meet those weight ratings, but the difference is a Class II hitch...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
John S
Updated by:
Wilson B
Test Fit:
Ryan G
Written by:
Justice A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.