To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located along your rear bumper. Once you've plugged in the connector, open your fuse box and locate the fuse position indicated in the instructions. Then insert the included relays.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (67 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required.Mdison. Thank you for all of your Help. Trailor hitch and wiring went together Good
2018 Equinox LT without towing package.
Removed 3 mounting screws on plastic fascia to allow room for my hands/arms.
Had to pry dust cover off existing plug with small screwdriver.
Plugged in new wiring harness and tested for voltage ( Without installing new relays) all 3 circuits, brakes, blinkers and parking lights worked perfectly!
works like it should. Super easy to ins tall.
The only difficult thing to installing this harness is getting the cap off of the car's wiring harness. After sliding the red lock tab out, make sure you push on the black tab in front of the red sliding tab while pulling the cap off. Trust me. Without pushing on the black tab, the cap won't come off. Once that's off just plug in the new harness and route it to the area where the safety chains attach.
I plugged it in and it works fine. I use the tester that you have, which is a very convenient little gadget.
Excellent product... I have a 2018 Chevy Equinox and this wiring harness along with the light tester worked great. The video by etrailer.com made it very easy to understand.This is the 1st time I attempted this type of wiring When I made the connection and then tested the lights and everything worked.... it was a big relief.
Thanks
The trailer connector is still working great.
Phil G.
1/17/2022
It works as intended.
Very good plan-n-play harness, but the plug?
Only issue was the male pin came out of the plug after only a couple of uses. Had to splice a cord and plug on the fly as we were taking a trailer with us on a trip, so no time to return, warranty etc. Overall a nice product, but now I have a spliced cord, which isn't desirable.
I have never installed a hitch before and am 79 years old. I followed your videos of the install of the hitch and the wire harness. everything went well and no problems at all.
It took me about 2 hrs. thanks for the great design to fit my vehicle.
Fit perfect with my 2019 Chevy Equinox.
The only issue I found was with the relays. They don't fit very tight into the plug, and they don't snap into place. I ended up having to zip tie them in to make sure they stay in place.
I added some wire conduit around the wires and then double wrapped electrical tape around the length to protect it.
The trailer wire harness (curt) instructions tell you to install relays... The relays are not needed and the only place that it says that they "May" be needed is in the install video that is only listed under the equinox, not under the Terrain install only took one-two min. I just wish the install sheet was more clear!
This OEM tow package wiring connector is fairly priced, arrived within the timeframe indicated, well packaged, and ready to use. Following etrailer's online video instructions I easily installed and tested this item and it works perfectly.
This was ordered and shipped same day. it was sent via snail mail but still got it in about 3 days. I would definitely recommend etrailer parts because they are exact fit - plug and play. Easy!
Simple and easy to install! Instructions could have been more specific for connector location (i.e. - under vehicle between bumper beam and body). Also supplied relays fit very loosely and required twisting the terminals slightly to get them to stay in contact.
Good simple product, but I returned it because my vehicle did not have the towing harness and fuses blocks from the factory.
Works great on my 2018 gmc terrain diesel. The relays were not necessary for my vehicle. Very simple plug and play easiest wiring job I have done. Plenty of wire so you can have plug where ever it needs to be. Very pleased. Thank you.
Bought this to fit my 2019 Chev Equinox. Cheaper here than anywhere. Installed easy and worked like a charm. Much better than splicing into wires. I bought the vehicle end tester which made testing so much easier. I am on the east coast of Canada and would recommend etrailer to anyone.
The shipping was not good pade XX.00 on the next day air and got it 3 day after
Jenny N.
5/26/2022
I will have our Customer Service team reach out to you.
The installation video made it easy, excellent product and great service. I recently purchased a hitch for my 2018 Equinox and that video also made the installation easy.
Plug and play awesome
Al
9/24/2021
Product is working great will buy again if need great product
The wiring harness fits exactly the way you explained in the video. Great job!!!!
It was easy enough to install but the connections for the turn signals seemed to be a little loose inside the car
Hooked up directly to my Terrain's wiring harness. Perfect.
easy ordering. Quick installation with the help of the video.
Teresa was great I had ordered one and was out of stock. She said this would work so I got it install was fast once I figured out how to get the dust cap off my car.(couldn’t see it) still need to test it but sure it will work.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Newt
3/15/2021
Great. Using it today as a matter of fact. Makes wiring up for a trailer a breeze.