bing tracking image
  1. Accessories and Parts
  2. Optronics
  3. Trailer Lights
  4. Wiring
  5. Plugs and Pigtails
  6. Three Wire
Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead

Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead

Item # A47PB
Retail:$7.95
Our Price: $5.94
You Save: 25%
Accessories and Parts
Shipping Weight: 0.05 lbs
Add to cart
In Stock
Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead Right Angle Pigtail A47PB
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for stop/tail/turn lights. 1-800-940-8924 to order Optronics accessories and parts part number A47PB or order online at etrailer.com. Free expert support on all Optronics products. Great prices and Fastest Shipping for Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (544)
  • Q & A (0)
  • Photos

Optronics Accessories and Parts - A47PB

  • Trailer Lights
  • Wiring
  • Plugs and Pigtails
  • Three Wire
  • Optronics
  • Right Angle Pigtail
  • 10 Inch Long

This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for stop/tail/turn lights.


Features:

  • Pigtail with 3-prong plug allows you to wire your Optronics light to your trailer
    • Designed specifically for use with Optronics stop/tail/turn lights, parking/turn lights, and warning lights
  • Right-angle design of plug allows wiring to run down from the light rather than straight out of the back
  • Male-pin, 3-prong PL-3 molded plastic plug connects to back of trailer light
  • 3-Wire pigtail
    • White wire for ground
    • Black wire for tail light
    • Red wire for turn signal
  • #10 Ring terminal on ground wire
  • Wire length: 10"


dimensions of pigtail

Pigtail is a direct replacement for:

  • Uni Bond PT9530
  • Truck Lite 94993
  • Grote 66843-3
  • Peterson 421-491


A47PB Optronics PL-3 Right Angle 3-Wire Pigtail for Trailer Stop, Turn, and Tail Lights

Alternate part number: A-47PB




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead - A47PB

Average Customer Rating:  4.8 out of 5 stars   (543 Customer Reviews)

This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for stop/tail/turn lights.

by:

Definitely made wiring the lights an easier task as I completely forgot about the wiring harness until the lights showed up and had to go back and order them. Added new brake, turn lights, as well as back up lights to both sides on the boat.

Michael E.

8/24/2021

Work great! Super bright and recommend the items to others. Have almost replaced all the lights on the entire trailer with your products. Thanks again!



by:

Good choice for connecting up your oval lights. Would definitely purchase again!



by:

Restoring a 1991 2 horse trailer. etrailer had all the exact lights made by Peterson, 35 years later.



by:

works great for my trailer



by:

The right-angle pigtail plugged into the LED light properly, making
a solid connection



by:

Harness fit LED Trailer light perfectly.



by:

Timely service with an exact replacement just as stated on the website.



by:

Always happy with etrailer



by:

The space behind the Optronics tail lights I chose for my concept Lotus T66 Europa is extremely tight. Normal connectors that bring wires straight off the back wouldn’t fit. This connector brings the wires out at a 90° angle, keeping them close to the housing. It made installation a simple matter.

Bruce F.

2/8/2020

Of all the lights in my BritishFrench car, these are the only ones that have given me ZERO issues. They are fully enclosed, fully sealed with rock solid connections. Made for trucks but look awesome on a 40” high concept race car.



by:

Top quality water tight connectors



by:

I was easily able to locate the trailer lights I required on this excellent website. Delivery was fast and the product was excellent. Thank you!



by:

Nicole the person on the phone took my order very helpful. I haven’t tryed them yet. I do thank her very much.



by:

Ordered the pigtails, lights and grommets to add additional lights to my cargo trailer I pull behind my motorcycle. These lights were easy to install, the wiring worked great with my already wired lights. The lights work great and are easily seen. Great product and would definitely buy again. This pigtail made wiring the lights quick and easy.



by:

Everything worked very well together. Sorry I don't have picture of lights in action attempted to upload a short video but site would not accept it as a valid file type. Just let me say guys riding behind me don't wanna be to close when it is dark out cause all they see is red!

Randall

7/30/2017

Wonderfully



by:

Plugs were pr-greased which was nice!



by:

Worked great



by:

Works as advertised.



by:

I have purchased scores of products online over the years, but this experience was by-far the best. Your website is well organized, well informed, and easy to navigate. The purchasing process went very smoothly, and the products that I purchased were competitively priced. The shipping and delivery was faster than estimated (and frankly, faster than I expected). The shipment arrived well packed, undamaged, and the contents were exactly as advertised. Thank you etrailer.com for a great experience...I'll be back to purchase again!



by:

Great Company, great product great price. Can’t beat the service !!



by:

The connecter went together just like the original. It has working ever since I install last year.



by:

perfect fit



by:

Good fit and materials, although the splice into an extension to plug directly into a standard 4 pole flat trailer hitch connector, was trial and error to get the correct functions of the light.



by:

Pigtails were of good quality but note that using them may require a hole of about 1 and 1/8



by:

Just the plug I needed! Using it for my boat trailer and did not want to have to order through the dealer. Great service and speed.



by:

All my trailer parts for a new build keep coming in from etrailer , my go to online store. Everything needed for building and maintaining trailer etrailer has. I have been dealing with etrailer for several years now and have never been disappointed.


25
543
Show More Reviews

See what our Experts say about this Optronics Accessories and Parts

  • Recommended 6 Inch Oval LED Backup Light For Brightness
    We have 6-1/2 inch oval LED lights that are very bright, that are typically referred to as 6 inch lights in the trailer industry. I recommend the Optronics GloLight LED Backup Light for Truck or Trailer - Submersible - 22 Diodes, # BUL111CB, because it is a very bright replacement light that that meets the DOT compliant standards. They have a very clean look and are sonically sealed so they can handle all the weather thrown at them. They require a recessed mount # a70gb, and a 2-prong...
    view full answer...
  • Recommended Oval Lights, Grommets, and Wiring for a BACKRACK Headache Rack for Pickup Truck
    I'd be more than happy to help! Here is what I found: Red - # STL111RB (x2) Amber - # STL111AB (x2) White - # BUL111CB (x2) PVC Grommet - # a70gb (x6) Pigtail - # A47PB or # A45PB (x6) These lights all match and measure 6-7/16" wide x 2-5/16" tall x 15/16" deep but the grommet will take up the rest of the space that you measured. Just be sure to only connect 1 of the wires for each function depending on how you're wanting it all to operate. I have attached a sample installation video...
    view full answer...
  • Round Replacement Tail Lights For a 2008 Coachmen Mirada 310DS RV Motorhome
    It sounds like your 2008 Coachmen Mirada 310DS is using lights like the LED Trailer Tail Light # OPT68FR which is held in place with a Rubber Grommet # A45GB. As no one is currently making a replacement lens for you lights you will need to measure the cutout to verify that you will be able to replace your lights with these. The rubber grommet is sized for a 4-1/2" hole. The light connects with a 3-Wire Pigtail # A47PB which can be spliced in if your light uses a different connection.
    view full answer...
  • Availability of Replacement # STL-74RBK LED Taillights
    The Optronics # STL-74RBK is a kit that includes the # STL72RB lamp, the # A70GB grommet and the # A47PB wiring pigtail. We don't sell the kit, but we do offer the parts separately. So, if your'e needing the replacement lamp only, you'd need the # STL72RB.
    view full answer...
  • Trailer Lights for 12 Volt and 24 Volt Systems on a 1994 Mercedes G Wagon and Honda CR-V
    Some trailer lights can be used on either a 12 volt or 24 volt system, but # STL16RB is not one of them. You could use # STL23R24B with harness # A47PB, grommet # A45GB, bracket # BK45BB for a 24/12 volt system and it would work with both vehicles.
    view full answer...
  • Bolt on Mounting Bracket Options for 6-1/2 Inch Oval Trailer lights
    The Optronics 6-1/2 inch Oval Trailer Lights, item # STL22RB, can be bolted on with the addition of a trailer light mounting bracket. These brackets are available in black powder coat, item # BK70BB, and stainless steel, item # 337LB1SS. Along with the mounting brackets you will need rubber grommets, item # A70GB to secure the lights in the oval openings. Finally you will need a pigtail connector to wire the Miro-Flex, Sealed, 6-1/2 inch Oval, LED Trailer Light, item # STL22RB. There...
    view full answer...
  • Pigtail Recommendation for Use with Clearance Light Part STL22RCB for Additional Clearance
    You are absolutely correct. The 90 degree pigtail part # A47PB would give you the needed clearance to install the part # STL22RCB. This would be exactly what you need.
    view full answer...
  • Parts Needed for Connection and Installation of the Sealed Oval Trailer Stop Turn and Tail Light
    Yes, the Sealed Oval Trailer Stop Turn and Tail Light, # ST70RB, can be installed on a trailer with a two wire system that has 3 function tail lights and Stop/Turn signal. You will need a pigtail to connect to the light and your trailer wiring. There are two options available, straight, # A45PB, and 90 degrees, # A47PB, see links. You may also need a grommet, # A70GB, and may need a Mounting Bracket, # BK70BB, to install these lights on your trailer. I produced a short video showing...
    view full answer...
  • Will Right Angle Pigtail Fit With STL33RB Optronics LED Trailer Tail Light
    Yes, the Optronics LED Trailer Tail Light # STL33RB will pair up directly to the Right Angle 3-Wire Pigtail # A47PB. To complete your install you may also want to pick up the Grommet # A33GB and Butt Connectors # DW05743-5. Attached are some videos for you to check out.
    view full answer...
  • Will the LED Tail lights and the 3 Wire Pigtail Fit on a 6 X 12 Foot Haulmark Enclosed Trailer
    The Sealed, 6-1/2 inch Oval LED Trailer Stop, Turn and Tail Light, will fit in the factory grommet if the original light measures 6-1/2 inches overall width and 2-1/4 inches overall height. This is the standard size of most of the lights installed on enclosed trailers. I have seen some lights that are 7 inches overall width and if your original is this size then the 6-1/2 inch light will not fit in the original grommet. At this time we do not carry a 7 inch oval taillight The 3 wire pigtail,...
    view full answer...
  • LED Version of Optronics Trailer Tail Light # ST70RB
    The LED equivalent of the Optronics Trailer Tail Light # ST70RB is part # STL72RB on our site. This has the same width and height dimensions and it even uses the same 3-prong plug # A47PB.
    view full answer...
  • Parts Needed to Install the 6-1/2" Oval LumenX LED Trailer Tail Light
    The LumenX LED Trailer Tail Light # M821R-10 has a pretty simple installation so you just need a grommet and a pigtail wiring with the industry standard 3-prong connector to complete the install. If this is a replacement then you likely already have these on your trailer, but if not these are the parts you need: - PVC Grommet # a70gb - Pigtail Wiring # A45PB (No Angle) OR # A47PB (Right Angle) The correct pigtail style really just boils down to what kind of spacing you have behind the...
    view full answer...
  • How Do I Wire a 3 Wire Pigtail # A47PB to a Trailer that has 2 Tail Light Wires
    You will wire the black and red wires from the 3 wire pig tail to the two wires from your trailer, the red wire will be wired to the turn signal circuit and the black wire will wire to the tail light circuit. The third (white) wire from the pig tail is the ground wire and will need to be attached to a good clean ground on your trailer.
    view full answer...
  • Does Custer LED Amber Quad Flash Kit # CPL65A-STR Also Have Brake and Turn Signal Functions
    The Custer LED Amber Quad Flash Kit # CPL65A-STR that you referenced is strictly a strobe/flash set of LEDs in this light. An amber brake/turn signal LED light that is the same 6-1/2 inches is the Optronics # STL72AB. With this light you will also need the grommet # A70GB and a pigtail for power. If you need the straight pigtail it is # A45PB and the right angle pigtail is # A47PB.
    view full answer...
  • What Is The Quantity On The Optronics Trailer Light # STL22RB
    On the Optronics Trailer Light # STL22RB, the quantity is one light. If you need a left and a right trailer light you will need to order a quantity of 2 lights. The light can be used on right side or left side. It is designed to accept an industry standard 3-prong plug. If you need a 3-prong plug for this light you can use either the Straight 3-Wire Pigtail # A45PB, or the Right Angle 3-Wire Pigtail # A47PB. The grommet that is needed for this light is the Rubber Grommet # A70GB.
    view full answer...
  • Is Optronics LED Trailer Tail Light # STL42RB Sold Individually or In Pairs
    The Optronics LED Trailer Tail Light # STL42RB is sold individually. If you needed a pair you'd need to order a quantity of two of these. For a wiring harness you'd then need the part # A47PB and for a mounting bracket part # BK45BB and you'd be set.
    view full answer...
  • Replacement LED Tail Lights for a Pace Cargo Trailer
    You will need four each of the Sealed, 6-1/2 inch Oval LED Trailer Stop, Turn and Tail Light, 48 Diode, item # STL70RB, Rubber Grommet for 6-1/2 inch Oval Trailer Tail Lights, item # A70GB, and either the Straight 3-Wire Pigtail, item # A45PB or the Right Angle 3-Wire Pigtail, item # A47PB. This is an exact replacement so your grommets will work with the light if they are not damaged or hardened from exposure to the elements.
    view full answer...
  • What Size Hole Saw Should be Used to Install Optronics Trailer Light, # STL70RB
    I went out to the warehouse and grabbed an Optronics Trailer Light, # STL70RB, and the compatible rubber grommet, # A70GB, put them together and took some measurements. The part that will be inserted into the back of the trailer is 2-3/8 inches wide by 6-3/8 inches across. If you plan on using a hole saw I would start smaller, like a 2 inch. You can then gradually make the hole larger until the grommet with the light in it fits. This light will also require the Straight 3-Wire Pigtail...
    view full answer...
  • Availability of 24-Volt Tail Lights for Lowboy Trailer
    We do have some trailer tail lights designed to work on a 24-volt system. I recommend using light # STL23R24B. There are a few ways to mount this light. You can use a grommet and flush mount it in a 4-1/2 inch cutout using # A45GB. Or you can surface mount it with a bracket, # BK45BB. You will also use a wiring harness, # A47PB. These parts only come in red.
    view full answer...
  • Replacement Trailer Tail Light Recommendation
    The light we offer for your trailer that is an exact replacement for the Peterson 421R, is the Optronics Oval Trailer Light, part # ST70RB. This is a sealed, waterproof light and has an incandescent bulb. The right angle pigtail that will work with this sealed light is part # A47PB. We do not offer an LED light with the same dimensions.
    view full answer...
  • What are the Wire Functions for Pig Tail Wiring Harness for Optronics LED Tail Light STL23R24B
    For tail light # STL23R24B you should be using wiring harness # A47PB which has the following functions: White is ground and will attach to truck frame Red is turn signal/brake lights and will connect to yellow wire on left side and the other light red wire will connect to the green wire for the right side Black is running lights and will connect to the brown wire. The one running light wire will go to one of the lights. Then you will splice in a jumper wire from one light to the other...
    view full answer...
  • Wiring Harness and Functions for Optronics GLOLight LED Stop/Turn/Tail Light
    It all likelihood the connector on your 1998 Chevy truck will not match up to the input on the Optronics GLOLight, # STL101RCB. You would need a harness made for the light, # A47PB and then splice the wires from it to the trucks wires. The truck will have to have combined brake lights and turn signals on the same wire for this to wire up correctly. On the wiring harness, white is ground, red is turn signal and brake lights, and black is running lights.
    view full answer...
  • Can Trailer Taillight STL55RB Replace Incandescent Bulb on Older Vehicle
    If you wanted to install the # STL55RB in place of the bulb you have now on your vehicle you certainly could but there isn't a direct adapter available. You'd basically need to remove the socket you have now so that you could wire the harness part # A47PB to it which is what plugs into the # STL55RB.
    view full answer...
  • Parts Needed to Install a Pair of the Miro-Flex Trailer Tail Light # STL22RB
    The Miro-Flex Trailer Tail Light # STL22RB that you referenced is sold individually. If you needed a pair of these you would need to order a quantity of two. For a mounting grommet you would want the part # a70gb and for the pigtail harness part # A47PB.
    view full answer...


< Previous
123. . .8



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Andrew S
Installed by:
Andrew S
Employee Laura H
Updated by:
Laura H
Employee Amy B
Updated by:
Amy B
Employee Brian T
Updated by:
Brian T
Employee Noah M
Updated by:
Noah M
Employee Chad S
Video Edited:
Chad S
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.