Will the LED Tail lights and the 3 Wire Pigtail Fit on a 6 X 12 Foot Haulmark Enclosed Trailer
Question:
I have a 2006 HAULMARK 6 X 12 fully enclosed trailer. Will these lights fit the gromment that came factory with the Haulmark trailer? Also will my factory tail light pigtail plug directly on to the new LED tail lights? Thanks for such lightning fast shipping on my last order!!! And Thanks, as always, for your help! I look forward to your reply and placing my next order.
asked by: Todd C
Expert Reply:
The Sealed, 6-1/2 inch Oval LED Trailer Stop, Turn and Tail Light, will fit in the factory grommet if the original light measures 6-1/2 inches overall width and 2-1/4 inches overall height. This is the standard size of most of the lights installed on enclosed trailers. I have seen some lights that are 7 inches overall width and if your original is this size then the 6-1/2 inch light will not fit in the original grommet. At this time we do not carry a 7 inch oval taillight The 3 wire pigtail, item # A45PB or # A47PB on your incandescent light is standard and should work with the LED light no problems.
I have installed these lights on a trailer I use and the LED lights are much nicer and brighter than the original lights that were on the trailer.
Products Referenced in This Question
3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Straight Pigtail
- Optronics
more information >
Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Right Angle Pigtail
- Optronics
more information >
Product Page this Question was Asked From
Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 48 Diodes - Oval - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2W Inch
- Red
- Optronics
more information >
Continue Researching
- Shop: PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Shop: Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Q&A: Wesbar 108121 Replacement Trailer Light
- Video: Review of Peterson - Trailer Lights - B421-18
- Video: Optronics Right Angle 3-Wire Pigtail Installation
- Video: Optronics Oval Trailer Tail Lights PVC Grommet Installation
- Video: Optronics Trailer Lights A47PB Review
- Video: Optronics Trailer Lights A45PB Review
- Shop: Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2
- Shop: PVC Grommet for Peterson 6-1/2" Long Oval Trailer Lights - Flush Mount
- Shop: 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Shop: Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens
- Article: Trailer Wiring Diagrams
- Search Results: trailer lights
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer jack
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Suspension Enhancement
- Search Results: safety chains
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Video: Optronics GloLight Trailer Lights Manufacturer Review
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Search Results: junction box
on Trailer Lights
