Replacement Light Bulb # 1157

See what our Experts say about this Optronics Accessories and Parts

• Replacement Parts For Combination Tail Light for Trailers Over 80 Wide # ST5RB and # ST4RB
  Yes, we have the Replacement Side Marker Lens # A2RB that fits the Combination Tail Light # ST5RB. This will also work on the Passenger Side Light # ST4RB We also have the Light Bulb # A1157B available as well.
  view full answer...
• Wiring the Wesbar Submersible Low Profile Trailer Tail Light Right Side # 403076 To A Trailer
  The Wesbar Submersible Low Profile Trailer Tail Light Right Side, part # 403076 has 3 wires coming out of the back of the light. The white wire would be for ground. The brown wire would be for the running lights and the green wire is for the right turn signal and brake. The light is sealed in the # 403076 tail light, but it does NOT have a replaceable capsule like on the older generation of Wesbar submersible low profile lights. The capsule in this # 403076 tail light has four screws that...
  view full answer...
• Picking Out Replacement Taillight Bulbs for 1990 Jayco Popup Camper
  I looked up a few pictures of a 1990 Jayco popups and found that they all seemed to have taillights like the # 30-92-003 that you referenced. This light takes a 1157 bulb like the # A1157B for an incandescent bulb. The side clearance lights appear to be the part # MC31RB for red and # MC31AB which use 194 bulbs like the # A194B.
  view full answer...
• Availability of Replacement Capsules for Wesbar Trailer Lights
  Some Wesbar lights have a the sealed type of capsule, and they are not meant to be opened. Instead, you would need to replace the whole capsule. The good news is that Wesbar offers replacements, depending on the model number, that can be easily opened to change worn parts, in addition to the sealed type. If you have a Wesbar Submersible Low Profile Light # 403026 and/or # 403076, the bulbs can be replaced by removing the clear capsule inside the light. If you want to swap it out for the...
  view full answer...
• What bulb is needed for the Bargman 30-92-106 tail lights?
  The Tail light bulb type needed for the Bargman Surface Mount Tail Light - 92 Series, # 30-92-106, is a 1157 double filament bulb. We have the Replacement Light Bulb # 1157, they are part # A1157B. For an LED replacement, the 1157 LED Bulb # DI52VR, is a great option that has 21 LEDs and a brightness of 210 lumens. If you want a red bulb so it doesn't wash out your lens, you can use the Putco PURE Premium 1157 LED Bulbs - 360 Degree - Red - 2 Pack # P231157R360.
  view full answer...
• Removing 1157 Light Bulb from Optronics Trailer Light
  The bulb that's in the # ST8RB light is an 1157 like part # A1157B. To change the bulb remove the front lens by taking off the screws and gently prying the lens away. Then to get the bulb out you'll need to push in on it a bit and twist the bulb.
  view full answer...
• Solution for Replacing Wesbar Trailer Lights on Shorelandr Jet Ski Trailer that Use Capsules
  The older generations of the Wesbar submersible low-profile lights came with sealed light bulb capsules that are not replaceable. If your capsule is sealed, then your best option is to replace the lights with new lights like part # 403026 and # 403076. The new lights come with capsules that allow you to replace the bulbs. The bulbs used in these lights are # A1157B.
  view full answer...
• What Size is the Brake and Tail Light Trailer Hitch Receiver Cover, # CR-007
  The outside dimensions of the light portion of the Brake and Tail Light Trailer Hitch Receiver Cover, # CR-007, are 3-1/4 inches wide by 3-1/4 inches tall. The shank is designed to fit in a 2 inch square receiver tube. The bulb inside is replaceable. It accepts the Replacement Bulb, # A1157B. You may also be interested in a trailer hitch receiver lock, # e98880, to secure the cover to the hitch and deter theft. I have included a link to a video review of the lock for you to view.
  view full answer...
• Which Filament in Optronics Bulb # A1157B is Used for the Turn Signal
  The Optronics 1157 Replacement Bulb, part # A1157B, and similar dual-filament bulbs have two different filaments. One filament is of a different resistance value, and thus makes a brighter light. That is why one bayonet on the bulb casing is at a different position than the other bayonet - so that you dont install the bulb the wrong way. The basic filament usually on the brown wire is running lights, the other filament usually green or yellow depending on which side of trailer has different...
  view full answer...
• Replacement 1157 Bulb for Wesbar Submersible Low Profile Trailer Tail Lights
  If you have the Wesbar Submersible Low Profile Trailer Tail Lights # 403026 and # 403076 on your trailer, which the replacement lens # 102641 fits, then the correct replacement bulb is the 1157 part # A1157B on our site. If you would like to replace them with red LED bulbs then we also have part # P231157R360 that you can use.
  view full answer...
• Is a Specific 1157 Light Bulb Used for Boat Trailer Tail Lights
  Yes, you should be able to use any 1157 bulb, such as # A1157B. So long as it is an 1157 bulb it will fit the socket and light up properly.
  view full answer...
• Is the 4-Way of the Standard Trailer Light Kit # TL29BK Compatible with OEM 4-Ways on Vehicles
  The 4-way of the Standard Trailer Light Kit # TL29BK that you referenced is the standard trailer wiring 4-way that is found on most trailers that would also be compatible with an OEM 4-way trailer wiring harness on a vehicle. They use a standard 1157 bulb. For a replacement you would want the # A1157B. The gauge of wire in this kit is 18.
  view full answer...
• Replacement Light Bulbs For Wesbar Trailer Tail Light With 102641 On Lens
  The Light Bulbs # A1157B & # A194B are replaceable on your Wesbar Tail Lights 403026. The part # 102641 is the number for the lens while the 102640 is for the inner assembly which is only available with the entire tail light at this time.
  view full answer...
  
• Replacement Bulbs for the Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness TL5RK
  I spoke with Optronics about the Submersible, Under 80" Trailer Light Kit part # TL5RK and they informed me the tail lights use 1157 bulbs part # A1157B and the side marker lights use 194 bulbs part # A194B.
  view full answer...
• Installation Details for RoadMaster Tail Light Wiring Kit with Bulbs # RM-155 on 2008 Buick Enclave
  You will need to drill a 1 inch hole behind the red lenses on your 2008 Buick Enclave. The RoadMaster Tail Light Wiring Kit with Bulbs, # RM-155 uses standard # 1157 (# A1157B) automotive bulbs which measure 1.83 inches tall and 0.97 inches wide. The sockets measure 0.95 inches where they attach to the taillight housing. Roadmaster says to drill a 1 inch hole in the taillight housing behind a red lens to fit the socket. Once the bulb is inserted in the socket it requires 1/4 inch clearance...
  view full answer...
• Is There More than One Bulb in Optronics ST8RB and ST9RB Trailer Lights
  For the trailer lights # ST8RB and # ST9RB there is only one bulb inside the housing and it is a 1157 like you mentioned. For a replacement you would want the part # A1157B. The light from the one bulb lights up the side and the front of the assembly.
  view full answer...
• Replacement Light Bulb For Optronics Square Trailer Tail Light # ST2RB
  The standard light bulbs in the # ST2RB light is part # A1157B. This bulb features 8.3 watts for the tail light function and 26.9 watts for the turn and brake light function.
  view full answer...
• How to Identify Correct Replacement Bulb for RV Porch Light
  If you can find a bulb number on your porch light's original bulb we may not need you to submit a photo. Most smaller incandescent bulbs will have a number printed right on the bulb glass or stamped into the metal base, such as on part # A1157B, which is an 1157 type bulb. If you can find a bulb number simply enter that into our search box to see replacement parts. Depending on the bulb required we may be able to offer you an LED equivalent that will produce less heat and use only about...
  view full answer...
• Side Marker Bulb for Peterson Trailer Tail Light
  The side marker bulb on your light is likely going to be a 194 bulb, # A194B. If this bulb does not look like the bulb you are trying to replace you can check for a model number on the light housing or email me some pictures of it and I might be able to identify it. For an 1157 bulb we have # A1157B.
  view full answer...
• Replacement Bulb for Wesbar Trailer Taillight 3504
  The Wesbar trailer taillight uses a 1157 bulb like the # A1157B for an incandescent or # P231157R360 for an LED. LEDs are much brighter, last longer, and draw considerably less than incandescent.
  view full answer...
• Comparing Optronics Replacement Trailer Light Bulbs 1157 and 2057
  The Optronics replacement bulb, # A1157B (or 1157) are dual filament bulbs. The double-filament design works for combination brake, tail and turn lights. You can also use # ARC85FR for a LED upgrade. The 2057 bulb that comes in some light fixtures is not as bright as the 157 bulb.
  view full answer...
• Recommended Replacement Light for Wesbar Trailer Light
  The Wesbar Submersible Low Profile Trailer Tail Light # 403076, which you referenced, uses the replacement Light Bulb number 1157. That part number is # A1157B. If you have a different taillight and you can provide the part/model number I will be glad to find a replacement bulb for you.
  view full answer...
• Parts Needed for a Complete Towing Setup for Flat Towing a 1994 Honda Civic
  The RoadMaster Tracker Tow Bar, item # RM-020, can be used with all Roadmaster base plate applications. You will need to add a Roadmaster Tow Bar Quick Disconnect Kit, item # RM-201, to the Roadmaster base plates that you select to be able to easily remove the tow bar when not towing the Civic. Base plates for your 1994 Honda Civic are available. For the DX, SI and S and Hatchback models the Roadmaster Classic Base Plate Kit, # 508-1, is the correct fit. For the CX, EX, and LX models the...
  view full answer...
• Is the Bulb Replaceable in the # CR-007 Brake and Tail Light Trailer Hitch Receiver Cover
  Yes, the bulb in the Pilot Brake and Tail Light Trailer Hitch Receiver Cover, item # CR-007, is replaceable with a Replacement Light Bulb, item # 1157. Just pop the lens off from the front bottom right hand side and the bulb can be easily replaced. You may also be interested in a receiver lock to secure the brake light in your trailer hitch. The Trailer Hitch Receiver Lock, item # e98880, would be an excellent choice. We a a video demo of this item for you to review, see link.
  view full answer...

Do you have a question about this Accessories and Part?