Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
(366 reviews)
Price: $207.39
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Retail:$327.59
Our Price: $207.39
You Save: $120.20
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (366)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch
- Class IV
- 2 Inch Hitch
- 6000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 900 lbs TW
- 10500 lbs WD GTW
- 1050 lbs WD TW
- Custom Fit Hitch
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 10,500 lbs
- Maximum tongue weight: 900 lbs
- Maximum TW when used with weight distribution: 1,050 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
75521 Draw-Tite Class 4 Trailer Hitch Receiver - Max-Frame
87430 Hidden Hitch Class 4 Trailer Hitch Receiver
Item # 75521
Installation Details
This Product Fits The Following Vehicles
- 1999 - 2013 GMC Sierra 1500
- 1999 - 2004 GMC Sierra 2500 LD
- 2007 - 2007 GMC Sierra Classic 1500
- 2007 - 2007 GMC Sierra New Body 1500
- 1999 - 2013 Chevrolet Silverado 1500
- 1999 - 2004 Chevrolet Silverado 2500 LD
- 2007 - 2007 Chevrolet Silverado Classic 1500
- 2007 - 2007 Chevrolet Silverado New Body 1500
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Defective
- etrailer mistake
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 75521
Average Customer Rating: 4.8 out of 5 stars (366 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Pamela 02/09/2024
The trailer hitch is a heavy duty well made hitch
by: John 01/15/2024
Had questions, about products, that weren't listed in "specifications" for custom fit trailer hitches. Kimberly O was extremely helpful and professional in giving me details pertaining to ETrailer products. I will continue doing business with them in the future!
by: Ed02/23/2023
Solid product and fit perfectly, beautiful and solid as an Ibeam. Greater trailer electrical plug than original!!
by: Steven 03/30/2024
2013 Chevrolet Silverado
Great hitch bolted right up in the exact same mounting holes no other modifications were needed
by: Doug 11/02/2022
Came pretty fast. Price was good. Quality was very good. It fit great and hardware was good. I was completely satisfied.
by: James 08/10/2018
2007 Chevrolet Silverado
Item arrived with no visual problems and all the hardware. Instructions were easy to follow and easy to install. I installed it by my self in about 1 hour. All the mounting holes lined up with no problems to be found. The hitch will be used for med to light cargo trailer hauling and a cargo carrier. This hitch replaces one which rotted off on my 2007 Silverado which I have included a pic.
James
8/10/2019
As good as the day installed!
by: Geoffrey 03/31/2023
Excellent speed of delivery for such a bulky item.
Geoffrey H.
4/1/2024
Works great. Absolutely no issues.
by: Ben10/07/2020
Took 20 minutes to put on. You will need a 22mm deep socket, 3/4 deep socket, 21mm deep socket, and a torque wrench. I use a 3 ton floor Jack to hold one side in place while I lined up the holes bolted right up. Shipping was very fast to. Lake day tomorrow
Ben M.
10/8/2021
Excellent
by: Brendan 03/09/2024
installed this almost 2 years ago, still in great shape, no signs of rust or corrosion and this is in a heavy wintertime road salt area. Definitely would/will purchase again if needed in the future.
by: Ricky11/02/2023
The hitch went on in under 30 minutes. Look great this is my sixteen year old sons first vehicle. The old hitch rusted out. Now he can tow stuff around the farm. Thank you so much.
by: Benjamin12/21/2021
Excellent customer service,my first order with etrailer,what a pleasure, delivery was spot on,product seems great,haven't actually pulled a trailer yet,in my case it is a replacement,had the old one off already upon delivery,22 minutes to install from off the delivery truck,to clean up,perfect fit as promised,I say it went on without a hitch!!!! personally I would have liked to see the bracket mount plate doubled,would just seem stronger to me,posted is the old one maybe you can see what I mean,but I have zero I'll remarks,like a kid in a candy store,can't wait tu actually use it,I did the install the moment the delivery came up the driveway
by: John D07/05/2023
Thank you for selling an awesome trailer hitch at a great price. My hitch was delivered by UPS a week after I ordered it and it was delivered without a scratch. Etrailer had an instruction video on their website that could not have made the replacement of my rusted out OEM hitch any easier. No problem at all in aligning any of the new hitches bolt holes with frame holes and bumper holes on my truck. New Draw-Tite hitch came with new mounting hardware that is hardness rated and protected with corrosion resistant coatings. Etrailer kept me up to date concerning status of my purchase with emails and after I got delivery of hitch. Thank You all at Etrailer!
by: Mike 04/09/2024
Delivery fast and easy install
by: Todd 08/10/2023
Item received promptly. Hitch lined up very well with existing factory holes. The only thing i did not like was the use of carrige bolts instead of bolts with heads on them. When trying to tighten the carrige bolts with the plates the plates were not quite big enough and they would spin when trying to tighten.
Overall I would recommend this product.
by: Dan05/24/2022
I purchased this to replace the factory hitch which had rusted out. It was very easy to install, probably an hour to remove the old one and install the new. Fits around the spare tire perfectly and is flush with the bumper.
Dan
5/24/2023
Great hitch, still going strong. Use it with a Reese load distributing trunion on a Silverado 1500 4x4 to pull a 4500 pound camper. Keeps it level and no pushing or sagging going over rough terrain. Would purchase again, get one!
by: Nathan02/29/2020
2005 Chevrolet Silverado
This hitch is an excellent value. It feels very beefy and well made. The steel is much larger and thicker than the OEM receiver that came off my 2005 Silverado due to corrosion. I really like that this hitch utilizes all 8 of the factory mounting holes, unlike some of the others which only utilize 4 or 6 of them. New hardware was provided, along with small plates to go inside the frame rail to better distribute the weight along the truck's frame. The bracket for the 7 pin plug is a nice extra too.
by: Harold07/02/2022
Excellent factory match on 2007 Silverado. Only mod was to cut off the old harness mount and screw it onto the new hitch. Great product good value.
by: David F.06/03/2023
2012 Chevrolet Silverado
I'm giving this review only four stars and here's why. I attached this trailer hitch to my son's 2012 Siverado chevrolet. The trailer hitch came with 4 carriage bolts along with their washers and nuts and four regular bolts with their washers and lock washers. The carriage bolts went on fine had no problem installing those four carriage bolts, but when it came to installing the four regular black bolts that's when I encountered problems. So let me explain what happened. The four black bolts, two of which screw into the truck frame and the other two actually screw into the bumper of the truck. Now starting with the truck frame you have two bolts that you have to remove first before you can install the new bolts. The driver side bolt came out just fine and I was able to install the new one with no problem. The passenger side bolt however for some reason had a nut screwed on top of the bolt and was like welded on this bolt and would not come out. I wound up using a cutting wheel tool to cut the bolt off the frame. To resolve this problem I had to buy, actually three new bolts two washers and one lock washer and one nut. to finish the job. One of the new bolts along with tow washers and a lock washer and nut replaced the passenger side frame of the truck bed and the other two new bolts went into the holes in the bumper because the black bolts that came with the hitch would not fit the holes in the bumper even after I used a wire brush and a lot of WD40 and those bolts still wouldn't screw into those wholes and that's why I had to buy the extra 2 bolts which by the way were AMS 1/2" bolts. The bolts that came with the hitch I do believe had to been metric because the bolts I bought had no problem screwing into the holes nice and tight. I finally finished the install of the hitch and it worked like a champ. The Hitch is made of high grade material and I love it. It's strong and rugged and it pulls my son's small trailer just fine. Over all I'm very satisfied with the hitch, but beware of some of the hardware that comes with it.
by: David 06/19/2023
Hitch arrived in great shape - installation was as simple and straightforward as described in the video - Even had my wife help with holding hitch in place while I bolted it in place - going to use it for ebike carrier - Thanks etrailer
by: Bob 03/04/2024
Perfect fit. Quality craftsmanship.
by: Michael04/23/2020
2007 Chevrolet Silverado Classic
After discovering original hitch was rusted with holes in it, I went on a search for a new hitch. etrailers website was super easy to navigate, and found many hitches that fit my truck. Ordering, shipping and installation was a breeze. Would order from again if need arises.
by: Ed05/28/2022
Replaced a worn out factory hitch on a 2012 Silverado 1500. Already had the old one off and in the scrap yard before this one arrived. Took about 15 to install. No need to use a jack or lifts, just lay on the ground and bolt it on. Only time will tell how well it holds up.
Would have given it 5 stars but the order was placed Friday night and even though it was in stock it didn't ship until Wednesday.
Including photos of new install and old one.
by: Shawn03/26/2023
GMC
This trailer hitch receiver has been great. It had detailed instructions, all the necessary hardware, and after removing the spare tire off my GMC, an easy install! Two pieces of advice I'd give to anyone getting ready to replace their hitch would be, clean and spray rust eater on all the nuts and bolts getting removed to install the hitch, and pay attention to how low your existing receiver is from your bumper to how low this one is, or any new one is. This one dropped my ball almost an 1½", so I had to make adjustments to my camper weight distribution setup so the camper would be level when fully hooked up. Thank you for your time!
by: Patrick05/01/2020
What can I say... everything was perfect! I needed it fast (for a job I had to do) it showed up in 2 days at a great price. Hitch fit perfectly, the parts were all there, the website was easy to navigate and find the right hitch. The job I needed it for was a success. Thank you!
25
371
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Will a Hitch For a 2001 Chevy Silverado Also Fit a 2001 Chevy TahoeI have a solution for you, but a hitch like the Draw-Tite # 75521 that fits on a 2001 Chevy Silverado will not also fit on the 2001 Chevy Tahoe. The correct hitch for a 2001 Chevy Tahoe is the # C13402, which also has a Class III 2 inch receiver similar to the # 75521.
view full answer... - Correct Draw-Tite Max-Frame Trailer Hitch Receiver for a 2001 Chevy Silverado 1500The correct Draw-Tite Max-Frame Trailer Hitch Receiver for a 2001 Chevrolet Silverado 1500 is part # 75521, not part # 75033 which is for an older model. Trailer hitches are designed for an exact year, make, and model and you cannot modify or adapt them to fit other applications.
view full answer... - Trailer Hitch that Fits Tight Against Bumper on a 2011 Chevy Silverado 1500The B&W hitch # BWHDRH25217 receiver would sit a few inches below the bumper on your 2011 Chevy Silverado. The Class V hitches for the 2011 Silverado 1500 are like that with the other option being Curt hitch # C15323, see video. Curt has a Class III hitch, # 13322, that fits up tight against the bumper. I have linked a video showing installation for you. Draw-Tite also has an option, # 75521, and I have linked a video for this hitch as well.
view full answer... - Will The Draw-Tite 75521 Fit A 2007 GMC Sierra Classic 1500 With Aftermarket Bumper?If the bumper you ordered is a direct factory replacement, then there should be no issues with getting the Draw-Tite # 75521 hitch installed. Unfortunately, if it is not a factory replacement, we can't guarantee the fitment. All the hitches we carry are designed from the manufacturer to fit stock vehicle and parts. With that being said, you should be able to tell pretty quickly if the new bumper will accept the hitch. I included an install video we did on an 07 Sierra for you to check...
view full answer... - Trailer Hitch and Wiring Harness for Light Towing with 2009 Chevy Silverado 1500I would always recommend using a hitch instead of a bumper mount. A bumper mount is not adjustable and getting the trailer level is a big part of towing safely, additionally a hitch is a stronger and more secure method. We have a small hitch, that installs using 6 holes already in the truck frame and does not require any drilling. Average mechanical ability should be sufficient to install it in about a half hour. The hitch is Draw-Tite Hitch part # 75521 and it includes all the hardware...
view full answer... - Ball Mount For a 2010 Chevrolet Silverado 1500 With The Draw-Tite Receiver # 75521It will really depend on if you know the height of your trailer coupler and if you have any kind of lift or altered ride height on your 2010 Chevrolet Silverado 1500. When we installed the Draw-Tite Max-Frame Trailer Hitch Receiver # 75521 on a 2011 Silverado 1500 we found the inside top of the receiver to be 19" from the ground. As most trailers will have a coupler height of 16-18" a ball mount like the Curt Class III Ball Mount with 2" Ball # C45036 will come with a 2" hitch ball and...
view full answer... - Class V Trailer Hitch Receiver for 2004 GMC Sierra 2500 LDThere are heavy-duty Class V trailer hitch receivers that fit your 2004 GMC Sierra 2500 LD, though the hitch you mentioned is only a fit for the 2500HD model. You need to have the standard factory bumper on your truck, and if you do, then there are two Class V hitches that fit: - B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" # BWHDRH25217 - Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15323 I've added links to the instructions and install videos for...
view full answer... - Trailer Hitch for 2006 Chevy Silverado 1500The Draw Tite Hitch part # 75521 is a confirmed fit for your 2006 Chevy Silverado 1500 and would work great tow your small pressure washing trailer. You would need to remove your factory hitch that you have currently.
view full answer... - Determining Tow Capacity of 2006 Chevy Silverado 1500Looks like the towing capacity of your truck is 3,800 to 7,700 lbs depending on how it's equipped. You'll want to check your owners manual with the engine size info of the truck handy to determine how much you can tow. Or you could contact a Chevy dealer. The Draw Tite hitch part # 75521 would have more than enough capacity and is a fit for your truck so it would be a great option. It's really hard to say how much longer your truck would hold out. If it was maintained well and you don't...
view full answer... - Trailer Hitch Recommendation for 2013 Chevy Silverado 1500 Towing Imagine XLS MLE22Unless you were using a weight distribution system like the Strait Line part # RP66083 with the Draw Tite hitch part # 75521 it would not have the capacity for the Imagine XLS MLE22 based on the unloaded weight you mentioned. Without a WD system the hitch has a 6k trailer weight capacity so by the time your trailer is loaded it would probably weight more than that. With a WD system it has a capacity of 10,500 lbs. The Curt hitch part # C15323 has a higher capacity at 16,000 lbs without...
view full answer... - Will the Draw-Tite Class III Hitch Fit a 1999 Chevy Silverado 1500The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75521 is indeed a confirmed fit for a 1999 Chevrolet Silverado 1500. It mounts to bolt holes 39" on center.
view full answer...
- Does Draw Tite Hitch 75521 Fit 2003 Chevy Silverado SSThe SS versions of the 2003 Chevy Silverado 1500 have the same hitch fits as the non-SS models. So that means the Draw Tite part # 75521 that you referenced does fit an SS.
view full answer... - What Size Install Hardware Does Hitch for 2011 Chevy Silverado UseWe sell replacement hitch install hardware for all of the hitches we offer like the # 75521 which fits your 2011 Chevy Silverado with the part # RHK. This hitch does use Carriage Bolt 1/2-13 X 1-3/4 GR5 quantity of 4 as well as 4 of the Bolt M14 X 2.00 X 40mm CL10.9.
view full answer... - Determining If Draw-Tite Trailer Hitch 75521 Fits A 2001 Chevrolet Silverado W/ 42 Wide FrameThe Draw-Tite Trailer Hitch Receiver # 75521 you were looking at is confirmed to fit your 2001 Chevrolet Silverado as long as it is a 1500 or 2500 Light Duty with the OEM rear bumper and brackets. This hitch fits vehicles with 42" wide frames measured outside to outside like yours. If you do not have the factory rear bumper and brackets then you will need to go with the Curt Trailer Hitch # 13332 which has the same 2" receiver and fits frames that measure 42" wide outside to outside like...
view full answer... - What Is the Tongue Weight Capacity of a 2005 Chevy Silverado 1500The maximum tongue weight capacity of your 2005 Chevrolet Silverado 1500 is 600 lbs so the 240 lbs of hitch weight that your trailer has will not be an issue whatsoever. I don't think the gross trailer weight will be a factory either but it will be best to reference page 4-72 of your owner's manual for this. I have attached a few parts below you might need as well to tow a trailer. Draw-Tite Max-Frame Trailer Hitch Receiver part # 75521 Replacement Custom Multi-Tow 7-Way and 4-Way Trailer...
view full answer... - Trailer Hitch Receiver and Other Parts Needed to Tow a Trailer with a 2009 GMC SierraIf your 2009 GMC Sierra is a 1500 then I recommend the Draw-Tite trailer hitch receiver, part # 75521. It has more capacity than most of the hitches without adding onto the price. I've linked a video of the install on a 2010 Sierra which will be the same for you. If your truck is not a 1500 then let me know so I can make the correct recommendation. Also, if you need trailer wiring I recommend part # C55384 for a 4-way connetor or part # 30955 for a 7-way. Whichever connects to your...
view full answer... - Comparing Class III Trailer Hitch Weight Capacities for a 2003 GMC SierraThere are many trailer hitch options for a 2003 GMC Sierra, the most notable difference between them is class rating. In general, the higher rated trailer hitch options will use more or stronger fasteners but that is not always the case as you have pointed out. I can't really say much about this as these specifications come from the manufacturer after their own testing but so long as you follow the instructions for said hitch and abide by the listed capacities there will not be any issues....
view full answer... - Replacing OEM Trailer Hitch on 2009 Chevy Silverado 1500 Z71 with Draw-Tite # 75521For a 2009 Chevy Silverado 1500 Z71 the Draw-Tite Max Frame Trailer Hitch # 75521 will be a great replacement for the factory hitch. It does require the factory bumper and factory bumper brackets for the correct fit. It will have the factory appearance but is actually a stronger hitch so I think your customer will be very happy with it. This hitch also has an e-coat base and powder coat finish to protect against rust so it should last longer.
view full answer... - Class III Trailer Hitch Fit for 2000 Chevy Silverado 2500 LDThe Curt Trailer Hitch Receiver # 13322 you referenced does fit a 2000 Chevy Silverado 2500 LD and I have linked an installation video of this hitch on a 2000 Silverado for you to check out. There are also customer reviews with photos from customers who have installed this on their 2000 Chevy Silverado. However, there are a number of other Class III trailer hitches that are confirmed by the manufacturer to fit a 2000 Chevy Silverado 2500 LD, and the other options are the Draw-Tite Max-E-Loader...
view full answer... - Removing Existing Hitch From 2009 Chevy SilveradoThe bolts you mentioned are secured by nuts that are welded to the truck's crossmember. Before loosening them, you'll want to spray them down with a spray lubricant. The Draw-Tite # 75521 is a fit for your 2009 Chevy Silverado. You can see an install video by clicking the provided link.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane H
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Jameson C
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B
Video by:
Jacob H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Doug
11/3/2023
Working great. No issues at all.