Replacement Square U-bolts for 26000 Dual Cam Sway Control

See what our Experts say about this Draw-Tite Accessories and Parts

• Replacement U-Bolts For Reese Dual Cam Sway Control Weight Distribution System With 5" Tall Frame
  The Replacement Square U-bolts for 26000 Dual Cam Sway Control # 58000 will replace the U-bolts for your Reese Dual Cam Sway Control weight distribution system (26000). These are designed to be used on trailers with a 4" or 5" frame. These bolts are 6" long measured from inside the U-bolt to the end of the threads. You will need 2 of these as they are sold in a pair for each bracket.
  view full answer...
• Thread Dimensions of Square U-Bolt Set 58000
  The thread size of the Replacement Square U-bolts # 58000 that you referenced is 7/16”-14.
  view full answer...
• Dimensions Of Replacement Square U-bolts for 26000 Dual Cam Sway Control part # 58000
  The Replacement Square U-bolts for 26000 Dual Cam Sway Control part # 58000 is 2 U-bolts,4 nuts and 4 washers for the Reese Dual Cam Sway Control weight distribution systems. To replace both cams you would need 2 of this part number. The inner width is 2-1/8" and the thread size is 7/16”-14. I have attached some dimensions of the U-bolts for your reference.
  view full answer...
  
• U-bolts for 26000 Dual Cam Sway Control, # 58000, To Fit 5 Inch Frame
  We have Draw-Tite Replacement Square U-bolts for 26000 Dual Cam Sway Control, # 58000, which fit trailers with a 4 inch or 5 inch frame. The U-bolts are 6 inches long.
  view full answer...
• What is the Strength Rating and Coating Material on a Draw-Tite Dual Cam Sway Control U-bolt?
  The U-bolt # 58000 is coated in a zinc plating. This is the same coating they also use on their marine jack products and is sufficient for use with a saltwater trailer per the manufacturer. I was not able to obtain a strength rating regarding this U-bolt however they did say it is made from 1035 steel and did not recommend using this U-bolt for other purposes than what it was designed for, which is for a weight distribution system. I've linked our selection of 2" wide u-bolts but at...
  view full answer...
• Inside Length, Width & Thread Length Dimensions of Square U-Bolt Set 58000
  I went to our warehouse and measured the Square U-Bolt part # 58000 to get the dimensions you need. The inside length is 6-inches, inside width is 2-1/8-inches and the length of the threaded portion is 2-3/4-inches. These dimensions are shown on the linked photo I prepared for you.
  view full answer...
  
• Inner Diameter of U-Bolt 58000
  The inner width is 2-1/8 inches on the U-bolts part # 58000. The overall length is 6 inches.
  view full answer...
• Weight Distribution System for an ATC Raven Cargo Trailer
  I do have an option for you but we do not offer a longer version of the Replacement Square U-bolts for 26000 Dual Cam Sway Control part # 58000. However, this is more or less irrelevant as you cannot use the Reese Dual Cam Weight Distribution System on an aluminum frame trailer like your ATC Raven Cargo Trailer because it creates too much stress for the frame to handle. The other issues you will have is that the Reese Dual Cam Weight Distribution System will require that you have space...
  view full answer...
• Recommended Weight Detection System for a ATC Raven Cargo Trailer
  I do have an option for you but there is not a longer version of the Replacement Square U-bolts for 26000 Dual Cam Sway Control part # 58000 available. However, this is more or less irrelevant as you cannot use the Reese Dual Cam Weight Distribution System on an aluminum frame trailer like your ATC Raven Cargo Trailer because it creates too much stress for the frame to handle. The other issues you will have is that the Reese Dual Cam Weight Distribution System will require that you have...
  view full answer...
  

Do you have a question about this Accessories and Part?