bing tracking image
  1. Front Receiver Hitch
  2. CURT
  3. Front Mount Hitch
  4. Custom Fit Hitch
  5. 9000 lbs Line Pull
  6. 350 lbs Vert Load
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Item # 31313
Retail:$468.95
Our Price: $286.15
You Save: $182.80
Front Receiver Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 49 lbs
Add to cart
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" 9000 lbs Line Pull 31313
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more. 1-800-940-8924 to order CURT front receiver hitch part number 31313 or order online at etrailer.com. Free expert support on all CURT products. Great prices and Fastest Shipping for Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2". Front Receiver Hitch reviews from real customers.
  • All Info
  • Reviews (53)
  • Q & A (0)
  • Photos

CURT Front Receiver Hitch - 31313

  • Front Mount Hitch
  • Custom Fit Hitch
  • CURT
  • 9000 lbs Line Pull
  • 350 lbs Vert Load
  • 2 Inch Hitch
  • Square Tube

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.


Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 350 lbs
  • Gross trailer weight: 3,500 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31313 Curt Front-Mount Trailer Hitch Receiver

Installation Details 31313 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 31313

Average Customer Rating:  4.8 out of 5 stars   (53 Customer Reviews)

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by:
2010 Toyota Tacoma

Work great, was easy to install, instruction that it came with weren't great, but video online helped. Going to use it for a bike rack and Winch. There was some scratches on the hitch when I received it, I think you need to rethink you packaging, putting metal on metal and wrapping it Saran wrap just doesn't keep it from rubbing, I will have to touch it up. Thanks for the fast shipping.

Etrailer Expert

Katrina B.

5/10/2023

Awe, I am sorry that it arrived in that condition. I would recommend using a rust-oleum type of paint to prevent any corrosion.



by:
2008 Toyota Tacoma

My front hitch for my 2008 Tacoma got to me within 3 days very fast service. I installed it in 30 minutes and was able to put the front skid plate back on without doing any other changes to it. Very good product. I will be using it to put my rod rack on front of truck to use it at the outer banks of North Carolina for surf fishing this coming fall. Thanks for a very good hitch.

Mike H.

7/21/2016

The hitch has worked really well for me. My rod rack that I use hitch for was esay to install and remove. Very good product.



by:

I need to thank the team @ eTrailer. The original front hitch for my Tacoma that I ordered was out of stock for a few months (Covid), and I needed the hitch for a trip in a week and a half. The eTrailer team had a different manufacturers brand at my door step in 2 days. I assembled the parts in my living room to make sure I had all the hardware, and exactly where all the bolts/washers will go. I cant wait to install it tomorrow. eTrailer had the best price I could find and delivered me the part in a very tight timeframe. eTrailer for the win!!!

Gregory

11/1/2021

Perfect. I attach a cooler and rod rack to the front of my vehicle for fishing. The rack is constantly loaded to and from the trailer hitch. After a year of abuse, its still not rusting I was pleasantly surprised. The trailer hitch on the back of the vehicle that came on the vehicle from the factory had rust by now on it. I would recommend.



by:
2006 Toyota Tacoma

Installed the Curt front hitch on a 2006 Tacoma. Install time was approximately 45 minutes by myself - very straight forward installation; instructions were very clear. I did not have to remove the skid plate. I was concerned that the hitch would be low, but it sits higher than the lowest point of the skid plate.
Primary use will be to mount a bike rack when pulling a travel trailer. Does the job perfectly!
Customer service was above and beyond. I ordered this on Wednesday afternoon and it arrived Friday afternoon! Box arrived in good shape, hitch and all hardware were in perfect condition.



by:
2009 Toyota Tacoma

Just got my front receiver hitch today got it put on took me about 45 minutes to an hour to get it installed. etrailer really got this delivered quick. Thanks etrailer!!



by:
2005 Toyota Tacoma

Super fast delivery! Double boxed for security. Completed straight-forward installation by myself in about 40 minutes using routine hand tools (3/4" & 11/16" wrenches).



by:
2006 Toyota Tacoma

Fit great!! Easy to install with some simple wrenches and sockets. Took approximately 45 min to mount. It arrived in 3 days and was packaged appropriately!!



by:

Fit, works, reasonably priced.



by:

Added this hitch a yr ago - orginal intent was to install a bike hitch rack on front ( works great as long as it is day time! Bikes distort headlights do much so not as good as I was hoping. Second note it did save my front end in September when a deer decide it want to play chicken and jumped out in front of me- ended up cracking my bumper but pretty sure (don't ask) that the hitch prevented it from destroying my entire front grill- so certainly paid for it self then. Lastily it is really convenient for moving my trailer around when parking it- its short and kept in a really tight spot so being able to just push it in instead of backing it in makes it so much easier.



by:

Works great to make a tricky turn pushing my boat into the garage. Much better visibility and maneuvering than trying to back up.



by:

it's worked fine so far. Have used it to move my trailer and when not doing that I have my winch mounted on it which is the main reason I got it. super strong and looks good.

Rex A.

12/31/2021

very happy still using winch on it



by:
2006 Toyota Tacoma

The front hitch makes it easy to push my off-highway teardrop trailer through a gate at an angle and into a storage shed. The hitch came with complete instructions for my 2006 Toyota Tacoma. I was able to install with no assistance. I used a floor jack to position the hitch, and the process took me 45 minutes .



by:

Works exactly as stated and provides a nice 2” receiver style hitch on the front end of the truck! I would have preferred a more discreet under mount but knew prior to install that it would be as pictured. I use mine with a hitch-mounted winch so that I can pull from both front and rear, depending on situation! No complaints and I would buy again!



by:
2009 Toyota Tacoma

I am not an automotive person. I was very leery about attempting this project. I called etrailer to confirm that I had selected the correct hitch receiver. Customer service was very helpful and I placed my order over the phone. I was told that there might be a delay in shipping due to back order. I received update emails and the product arrive earlier than promised. Installation instructions are clear, an online video is available. Installed hitch receiver on my 2009 Toyota Tacoma by myself. No exotic tools required. I would not hesitate to purchase from etrailer again. Oh, great price too!



by:
2009 Toyota Tacoma

i had looking for a front mount trailer hitch for my 2009 toyota tacoma came across the web page ordered the unit with no problems it showed up a few days later due to the weight of the hitch it was delivered by ups with the box completly busted open but no damage so who cares. i installed it today very nice install very straight forward i am planning to customize the skid plate along with my front light bar to fit on the hitch took about an hour to install. the unit is overbuilt for what i need it for. more than enough to hold my front mounted cooler and rod holders for surf fishing photos to follow> will buy from this company again,and again, thanks again andrew r milton mass



by:
Toyota

Great hitch, solid construction, fits perfectly, great value. This is actually the third Curt front mount hitch that I have bought and installed on my Toyota pickups over the years.



by:

All Hardware was present. Electric Harness installation went well after I had difficulty separating stock plug for harness plug in. Removed Bumper for more room to view. I suggest a helper to position assembly up in place. I was going to use a floor hydraulic jack to get er done. A friend just came by. Had to purchase a 19mm box/open end wrench to tighten 2 bolts. Deep sockets will not get in there.
Now for the front hitch.
Cheers dlj



by:

Easy to install. Even able to put by bull bar back on. Strong and sturdy. The striper are going to dread seeing me pull up.

Eric M.

5/9/2015

Still like brand new



by:
2014 Toyota Tacoma

I had self inflicted doubts about this product but Ashley was professional and timely in setting me up with a technician wor was able to direct me for proper installation.



by:
2012 Toyota Tacoma

Great front hitch. Took about 35 minutes to install on 2012 Toyota Tacoma with just a few wrenches. The hardest part was getting the plastic hole plugs out of the holes to use to mount the hitch to the frame.



by:
2012 Toyota Tacoma

For my 2012 Double Cab Tacoma.
Arrived
to my home as predicted. Easy to install, removed the skid plate but able to re-install it afterwards. Looking forward to using it.

Richard A.

5/15/2015

Did you have to modify the skid plate in anyway for the skid plate reinstall?

Yadayadayada

5/19/2015

No modification needed or required to fit on my 2012 Tacoma DCSB off road package



by:
2011 Toyota Tacoma

Looks well made. Received promptly from eTrailer as promised. Haven't been able to mount it yet as the hardware package from Curt was incorrect. Still waiting for a replacement bolt.



by:

This was the second CURT product I purchased, and was (is) equally impressed. ALL washers, nuts, bolts, etc were included as promised. Fit was also as promised; no drilling, bending, forcing or other muscle power required. Kind of hard to believe; didn't even skin a knuckle. Thanks. Bill



by:
2005 Toyota Tacoma

Product arrived fast.Everything was there and in excellent shape. With the instructions installation was a breeze!! This will be used for a plow I purchased for next year.



by:

I found this website when I was searching for the hitch. I took a chance and was very impressed. The hitch is very good quality, good price and super quick on the shipment.


25
53
Show More Reviews

See what our Experts say about this CURT Front Receiver Hitch

  • Does Skid Plate on 2015 Toyota Tacoma TRD Need Permanent Removal For Front Trailer Hitch
    The skid plate does need to be permanently removed on a 2015 Toyota Tacoma TRD to install the front mount trailer hitch that fits, which is the Curt Front Mount Trailer Hitch Receiver # 31313. The reason for that is where the hitch fits relative to the skid plate on the TRD models, so there's just no way around it, unfortunately.
    view full answer...
  • How To Use Front Mount Hitch and Bull Bar Together on a 2012 Toyota Tacoma 4x4
    The best fit front mount trailer hitch we have for your 2012 Toyota Tacoma 4x4 is the Draw-Tite Front Mount Trailer Hitch Receiver part # 65070. The reason that this is the best fit trailer hitch is because it allows you to retain the skid shield unlike the Curt Front Mount Trailer Hitch Receiver part # 31313. Unfortunately, you will most likely need to remove your bull bar as it will mount in the same location as either front mount hitch. This is the case for most vehicles though so it's...
    view full answer...
    Image 1 for
  • Curt Front Hitch for the 2009 Toyota Tacoma Capacity
    The Curt Front Mount Hitch # 31313 being able to accommodate your dirt bike will really depend on the weight of the bike. There are also a variety of factors that go into carrying something of that size in front of your vehicle. The etrailer Motorcycle Carrier w/ Ramp for 2" Hitch - 76" Long # e98873 has a steel construction and is designed to hold bikes up to 500 pounds. It weighs 58 pounds. The 350 pound hitch capacity minus the 58 pounds leaves you with 242 pounds for your bike....
    view full answer...
  • Can Curt # 31313 Front Mount Receiver Be Used on Rear of 2010 Toyota Tacoma
    The Curt # 31313 is a fit for the front of a 2005-2014 Toyota Tacoma only and would not fit the rear of the vehicle. For a rear receiver, I would recommend the Curt Class III receiver, part # 13323. If you would care to see an install video of the # 13323 receiver hitch being installed on a 2010 Tacoma, please click the provided link.
    view full answer...
  • Front Mount Receiver Trailer Hitch for a 2010 Toyota Tacoma
    The Curt front mount receiver, # 31313, is a front mount receiver. You can also call it a trailer hitch even though it is at the front of the vehicle and not the back. As far as installation notes for this hitch, I show that no drilling is required or cutting of anything at the front of the truck for installation. The only modification is that the bumper end caps will have to be removed. I have included a link to the installation instructions for you. We have not yet had the chance to...
    view full answer...
    Image 1 for
  • Front Mounted Hitch For 2009 Toyota Tacoma With Skid Plate
    For a front mounted hitch that fits your 2009 Toyota Tacoma, go with an option from Curt: - Curt Front Mount Trailer Hitch Receiver # 31313 I like Curt as they have, in my opinion, a deserved reputation for overall quality, and it's what I would go with on my '09 Tacoma. The skid shield is not mentioned in the directions, but per customer feedback we know that some have not had to remove it at all, but those who did have been able to put it back on; I've added a cut out showing some...
    view full answer...
    Image 1 for
  • Recommended Front Mount Trailer Hitch Receiver for 2015 Toyota Tacoma
    If it were me, I would go with the Draw-Tite front mounted hitch # 65070 over the Curt front mount hitch # 31313 for your 2015 Toyota Tacoma. We have just had better luck with the Draw-Tite brand and for the increased vertical pull, if you ever decide to use it for another purpose plus the lower cost the Draw-Tite is pretty hard to pass up in my opinion. I have linked both front mount hitches to this page for your viewing and purchasing convenience.
    view full answer...
  • Front Hitch Recommendation for a 2013 Toyota Tacoma
    The Curt hitch part # 31313 that you referenced has been confirmed as a fit for your 2013 Toyota Tacoma so it would work well for you. This hitch will fit all models so it yours being a 4WD model would not matter. Here are the tech tips for installing this hitch: Bumper beam end caps must be removed. Front skid shield will be removed. No drilling required for installation
    view full answer...
  • Recommended Front-Mount Draw-Tite Trailer Hitch for 2014 Toyota Tacoma
    Both the Curt Front Hitch # 31313 and the Draw-Tite Front Hitch # 65070 are confirmed to fit your 2014 Tacoma 4x4 but I definitely recommend the Draw-Tite for its higher 500-lb vertical load weight rating and because it allows re-installation of the skid shield which is not possible with the Curt. If you're intending to use a hitch-mount snow plow like the Detail K2 Avalanche # K2AVAL8219 or a hitch cargo carrier like # 63153 or any other potentially heavy item you might want to consider...
    view full answer...
  • Will Curt Front Mount Hitch Fit 2010 Toyota Tacoma With ARB Bumper
    Without having the vehicle with the bumper installed to check, and with no instructions available for your ARB bumper, it is not something I can confirm. Based on the brackets I can see on the ARB it looks like the bumper and the Curt # 31313 would interfere with each other. The ARB bumper does appear to sit higher so I don't think clearance wouldn't be an issue. What you can do is compare the instructions attached below to your vehicle to see if you would be able to install it using...
    view full answer...
  • Removing the Skid Plate to Install Curt Front Mount Reciever 31313 on a 2008 Toyota Tacoma TRD
    On each end on the bumper of your 2008 Toyota Tacoma there is a little plastic cap that covers a bolt. These caps are removed to loosen the bolts for installation of the Curt Front Hitch, # 31313. You are correct that the front skid plate will have to be removed as well. I have included a link to the instructions below.
    view full answer...
  • Best Front Hitch and Plow Recommendation for a 2015 Toyota Tacoma
    The Curt Front Hitch part # 31313 that you referenced has been confirmed to fit your 2015 Toyota Tacoma so I would recommend it for you. For a snow plow I would recommend the K2 # K2AVAL8219 because of how well it works and how easy it is to use.
    view full answer...
  • Parts Needed for Transporting 2 14-Foot Kayaks on 2010 Toyota Tacoma with Factory Roof Rack
    We can get you set for hauling your two 14-foot kayaks on your Tacoma. A hitch-mounted load support system like the Erickson # EM07605 is the way to go. Since you already have a roof rack on the truck's cab you'll simply insert the extender into a 2-inch hitch, either a rear-mounted hitch or a front-mounted one like # 31313. If you need tie-down straps to secure the kayaks you might consider 4-piece ratcheting strap set # EM31352 from Erickson. You can also add two Foam Kayak Blocks...
    view full answer...
  • Can Skid Plate on 2008 Toyota Tacoma Be Reinstalled after Installing Curt 31313 Front Receiver
    If you'll look at the provided customer review by Mike H, you'll see that he was easily able to reinstall skid plate after the Curt # 31313 Front Mounted Receiver was installed on his 2008 Toyota Tacoma. No modifications were needed. I've linked to the installation instructions for you.
    view full answer...
    Image 1 for
  • Front Hitch Installation On 2011 Toyota Tacoma
    I contacted Curt on your behalf and they confirmed for the Curt Front Mount Trailer Hitch Receiver # 31313, the side carriage bolts should be replaced with the installation kit bolts and there shouldn't be plastic fittings to remove there. For 2 wheel drive model Tacomas however there may be a need to drill the holes from the bottom up - reference the diagram on page 1, (TYP) (2WD Only) in the instructions for these specific holes. If that is where you're referring to then there will...
    view full answer...
  • Will The # 31313 Trailer Hitch Fit A 2008 2 Wheel Drive Toyota Tacoma
    The two confirmed front hitch fit options you have to choose from for the 2008 Toyota Tundra include Draw-Tite Front Mount Trailer Hitch Receiver # 65080 or Curt Front Mount Trailer Hitch Receiver # 31198. Both are high quality hitches that wil do the job but the Draw-Tite is my recommendation as it's stronger with a 500lb rated for the vertical load which is the tongue weight of the front mount hitch. This is the amount of weight the hitch can carry, and the line pull capacity is the...
    view full answer...
  • Removing Skid Shield to Install Front Mounted Receiver on 2014 Toyota Tacoma
    To retain the skid shield, you'll want to go with the Draw-Tite # 65070. In order to install the Curt # 31313 front hitch on your 2014 Toyota Tacoma, the bumper beam end caps and the front skid shield would need to be permanently removed. For the 2006 and earlier model year, the skid shield could be replaced without modification. We've received comments from folks who installed the Curt front hitch on newer 2014 Tacomas and were able to retain the skid shield by modifying it, but I have...
    view full answer...
  • Will Curt Front Trailer Hitch 31313 Fit a Base Model 2-Wheel Drive 2007 Toyota Tacoma
    Curt front mount trailer hitch # 31313 fits all models of the 2007 Toyota Tacoma. There should not be any interference with any of the truck components since the hitch sits out in front of the ends of the frame and in front of the bumper beam as shown in the instructions I have linked for you. Even though it isn't much fun, try not to accelerate into any ditches! You may also be interested in the winch mount # C31010. I have linked a video on the mount and a picture showing the winch mounting...
    view full answer...
    Image 1 for
  • Does Front Hitch Install on 2015 Toyota Tacoma TRD Require Removal of Skid Plate
    Normally the skid plate can reinstall after the front hitch part # 31313 is installed but on the TRD models the skid plate is different and can't be.
    view full answer...
  • Front Trailer Hitch Receiver That Will Allow For the Skid Plate To Mount On a 2008 Toyota Tacoma
    I do have an option that will allow for you to still have your skid plate on your 2008 Toyota Tacoma as with the Curt Front Mount Trailer Hitch Receiver # 31313 mounted to the front of your Tacoma the skid plate must be permanently removed and not reinstalled afterwards. The Draw-Tite Front Mount Trailer Hitch Receiver # 65070 will allow for you to reinstall the front skid plate after the receiver has been installed. I do recommend using a Draw-Tite QSP Trailer Hitch Silencer and Cover...
    view full answer...
  • Is Skid Plate Removal Required to Install the Curt Front Hitch part # 31313
    You should be able to reinstall your skid plate after installing the Curt Front Hitch # 31313. On the older models (prior to 2007) the skid plate isn't required to be removed. The newer ones after 2007 do require the removal of it, but we had a customer with a 2012 model write us a review where he said he was able to reinstall his skid plate. Without knowing what year your vehicle is it's hard for me to give you a more specific answer than that.
    view full answer...
  • Ground Clearance After Installation of Draw-Tite Front-Mount Hitch 65070 on 2012 Toyota Tacoma
    Draw-Tite front-mount hitch # 65070 is a confirmed fit on your 2012 Toyota Tacoma 4WD. We have not had a chance to install this particular item nor the Curt equivalent # 31313 on your same truck so for purposes of seeing the effect on your ground clearance I refer you to the linked photo sent to us by a customer that installed this hitch. The bottom of the receiver tube will be approximately 4-inches below the bottom of the front bumper cover.
    view full answer...
    Image 1 for
  • Fit of Curt # 31313 Front Mounted Recevier on 2011 Toyota Tacoma
    The Curt Front Mounted Receiver you mentioned, part # 31313 is indeed a fit for the 2011 Tacoma. If you'd care to see the installation instructions, simply click the link I've provided.
    view full answer...
  • Will The Curt Front Hitch 31313 Work With An ARB Front Bumper
    Looking at these ARB bumpers, they do sit up pretty high. I do not think you would have any issues with the receiver or crosstube of the front hitch # 31313 interfering with the bumper. My concern would be the side flanges on the hitch are going to be close to the same location as the bumper mounts. You may need to sandwich the brackets together, in which case as you said, longer bolts would be needed. We cannot provide longer bolts but you shouldn't have too much trouble finding some grade...
    view full answer...


< Previous
12



Do you have a question about this Front Receiver Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Written by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.