EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - Class III - 2"
(58 reviews)
Price: $492.99
EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 306-X7365
Retail:$512.89
Our Price: $492.99
You Save: $19.90
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (58)
- Q & A (0)
- Photos
EcoHitch Trailer Hitch - 306-X7365
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Completely Hidden
- EcoHitch
- 525 lbs TW
- Custom Fit Hitch
This completely hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Receiver easily removes when not in use. Aluminum and steel alloy construction is durable and eco-friendly.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Hidden design - hitch is completely out of sight for a clean, from-the-factory look
- Hitch cross tube is concealed behind rear bumper
- Receiver is removable - unbolts from hitch when not in use
- Easy, bolt-on installation - no drilling or welding required
- Installation hardware included
- Sturdy, lightweight alloy construction
- Alloy is made of recycled materials and combines aluminum, steel, and stainless steel
- Black powder coat finish offers superior rust protection
- Meets SAE J684 towing safety regulations
- Made in the USA
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 525 lbs
- Not rated for weight distribution systems
- Limited lifetime warranty
Hidden Design for a Clean, Factory Look
The EcoHitch Stealth trailer hitch is designed to be completely out of sight when you're not towing. The hitch's cross tube bolts onto your vehicle's frame, behind your rear bumper. No drilling or welding is required. Once installed, the cross tube will be completely concealed and only the receiver will be visible beneath your bumper. But unlike other hitches with hidden cross tubes, the Stealth goes one further. You can remove the receiver portion of the hitch for a completely out-of-sight setup. To mount the receiver, just insert it up into the access port that is built into the cross tube. Secure the receiver to the hitch with the supplied bolt and washers. When you're done towing, just remove the receiver portion to return your vehicle to its clean, factory appearance.
Eco-Friendly Material
With a combination of aerospace-grade aluminum, steel, and stainless steel, each EcoHitch is made of a strong metal alloy that will stand the test of time. The lightweight alloy is composed of recycled materials. Traditional steel hitch manufacturing can use coal or oil, which can contribute to harmful gas emissions. The EcoHitch's recycled materials limit the carbon footprint during manufacturing, so you get a sturdy trailer hitch while also helping the environment.
Rigorous Strength Testing Ensures Durability
This EcoHitch trailer hitch is tested for durability and sturdiness. Using Finite Elemental Analysis (FEA), individual points of stress on the hitch can be detected and remedied. Designers can accurately test the hitch to ensure that it will meet or exceed SAE J684 standards. The EcoHitch Stealth trailer hitch is carefully researched and strength tested for a durable, high-quality hitch that can resist damage while on the road.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
X7365 Tork Lift Central Eco Hitch Stealth Trailer Hitch - 2" Receiver
This Product Fits The Following Vehicles
- 2018 - 2019 Subaru Crosstrek
- 2020 - 2024 Subaru Crosstrek excluding Hybrid
- 2020 - 2024 Subaru Crosstrek Hybrid
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
Customer Reviews
EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - Class III - 2" - 306-X7365
Average Customer Rating: 4.6 out of 5 stars (58 Customer Reviews)
This completely hidden, custom-fit hitch installs behind your vehicle's rear bumper so that the cross tube is always out of sight. Receiver easily removes when not in use. Aluminum and steel alloy construction is durable and eco-friendly.by: John11/20/2023
The hitch arrived fast but had multiple spots on it showing bare metal . Kinda felt that for $[XX], painting this shouldn’t have been my job. Install was easy.
by: Marquis03/25/2024
2018 Subaru Crosstrek
Mounted up very easy, I did it by myself with a box and a pillow. I knocked one of the bolts into the frame but was able to fish it back out with a magnet. Took about an hour. 10/10
by: BT08/21/2023
Videos and accompanying "pull wire" made this hitch very easy to install. Love the hidden look when receiver is out and the perfect spacing when using hitch with my bike rack!
by: Caleb12/29/2023
2023 Subaru Crosstrek
Box arrived damaged and paint was scratched. Product appears to have previously been installed. I wasn’t aware I was getting a used item. More paint blemishes discovered upon further examination. Also photos appear to not upload properly and because I took them from the website they were never saved to my phone, so now I have no evidence of how damaged the box was when it arrived. The box seemed to be resealed and there is strong evidence that this was a used product. It appears that previous owner attempted to install only to realize improper fitment and returned the product.
Jenny N.
12/29/2023
Our hitches are new however it sounds like this hitch had a rough trip in the box. I will have our Customer Service team reach out to you. We can replace the hitch for you.
by: Bruce04/11/2024
2024 Subaru Crosstrek
Seems nice shipped really fast but for the money you would think it be packaged better its scratch up but id like to use it this weekend so..
Jenny N.
4/13/2024
Sometimes it happens that the hitches are scratched in shipping either on its way to you or to us from the manufacturer. I will have our Customer Service team reach out to you. We can send out a paint kit to touch up the hitch.
by: Dan V.10/04/2018
2018 Subaru XV Crosstrek
The hitch was just as expected. Super easy to remove and once removed you wouldn't know the car had a hitch. The video installation doesn't show how to install the bolts but the instruction booklet that comes with the hitch explains it well. There is no cutting or filing required for a 2018 Subaru Crosstrek. It literally took me 45 minutes to install alone.
I had a problem with missing washers as UPS must have damaged the box and the washer bag was split open. Etrailer.com sent new hardware quickly. Very good customer service - they made things right.
by: Roy A08/10/2019
I like the option I get to take off insert in case I need that extra clearance. However I NVR Had to take off and like option of stealth look. I use it on my crosstrek to pull a light weight kayak trailer.
by: Dwayne04/08/2020
Here is my 2019 Subaru Crosstrek with the Ecohitch Stealth Hitch installed.
by: Brian 04/18/2023
2023 Subaru XV Crosstrek
Fits perfectly on my 2023 crosstrek, pretty simple to install, only takes about an hour. I would recommend finding a friend or an extra set of hands when mounting however, just for ease of lining up the bolts & not having them get shoved back inside the unibody while trying to align them with the holes in the hitch frame. Great product & recommended if you can afford the extra cost for the ability to remove the receiver when not in use.
by: Fred 02/05/2023
When the hitch was finally installed, I was very happy with it. The removable receptacle makes the hitch truly hidden. The hitch is very solid. I plan to use it for bike racks and a basket carrier. The installation process for me took about 4 hours. Despite warnings one of the four bolts got knocked up inside frame. By putting super glue on my finger I managed the move the bolt near the hole and then used needle nose pliers to get it back in position. It would really help to have two people but I was solo. A second problem was that two on the bolts kept turning while trying to tighten them. Solved this my attaching a vice grip pliers to the end of the bolt. This allowed me finally tighten the nut so the bolt wouldn’t turn. The company was very prompt and kept me notified during the shipping process. The videos on the product page were also very helpful. I thought the cost of this hitch was rather high compared to the non-hidden one, but I do like the final look and function.
by: John 11/07/2023
See previous
by: Artalle03/28/2023
I love how easy it is to install by yourself. It's amazingly low profile when you remove the adapter.
by: Jon 03/14/2023
What I said on the wiring kit pertains to this as well.
by: Joe09/14/2018
2019 Subaru Crosstrek
I received the hitch and proceeded with the installation, carefully reading the instructions. First, the instructions are written very poorly. In addition, the plate washers have a hole whose diameter is too small to fit the bolt attached to the fish tape they supplied. After opening a larger hole and installing the hitch. I am not able to tighten the bolts because the plate washers are loose inside the channel and as a result, the bolts cannot be tightened to the recommended torque indicated. I called etrailer and spoke to a Steve who did not know much about installing a hitch. He told me to call Eco Hitch. They apologized and, by the way, they are fully aware of the problem but yet they keep sending the hitches out with the defective parts. I will likely be sending the hole thing back (if I can remove it with the free wheeling bolts). I do not recommend this product.
Mike L.
9/14/2018
According to the engineering folks at EcoHitch, the best solution to this would be to use an impact wrench to run the bolts down. An impact wrench will spin the nuts more quickly than the bolts, allowing the nut and bolt to tighten up. Once the connection is snugged up, you can then torque the bolt as called for in the instructions.
by: Caleb. D09/27/2020
I love this hitch. The only piece you can see is the actual hitch receiver - the rest is hidden. You can even remove the receiver if you want to maintain a clean look when its not needed. The hitch is very sturdy...I regularly use a heavy duty "One-up" bike carrier with 3 adult bikes - its stable and handles the load no problem. The only gripe I have (which appears to be a problem with every hitch I've ever owned) is that after one winter season, rust starts to form on the receiver. I combat this with lithium grease, but it just seems like they would have a better paint process to ensure that doesn't happen. The only other gripe I have is the installation was tricky...you need to thread some bolts into the chassis using a wire tool (provided). I made a mistake during the process and a piece fell off before i could thread it. With about an hour of trying different ways to recover, my 13 year old daughter was ultimately able to save me. That the price you pay for wanting a very low-profile hitch that isnt ugly.
by: Chase05/29/2019
Hitch was pretty easy to install, under 2 hours, but I would recommend having a second pair of hands. Test-fit all the bolts and washers before threading it through with the wire, because once you start, it might be near impossible to get them back out. I screwed the nut on each bolt just a little after I threaded each one just because I was worried about losing them. I could have done it solo, but a second pair of hands really helped with aligning the bolts without knocking them out of place.
When tightening the nuts, I had to use a crescent wrench and pull a bit on the bolt with some gloves on to get it to grip enough to tighten it the last bit without it freely spinning.
I only have used it with bike hitches and have had no problems with it.
by: David09/24/2018
Fairly easy to install, took me 1.5 hours . Best to have two people when securing bolts.
by: Greg 08/14/2022
Really high quality and I like the fact that I can take off the bottom and keep slick look of not having a tow hitch.
I had it installed, but they said it was straight forward and easy to do for them.
Highly recommend.
by: Salvatore 08/14/2022
Subaru XV Crosstrek
Product works perfect on my Crosstrek for my bike rack. Shipping was fast, I would order the hitch again from etrailer.
by: Jonathan06/30/2019
2019 Subaru XV Crosstrek
GET A PRO TO INSTALL. Not a do-at-home project! For one, the hitch is heavy, and to hold it up and be able to delicately align it with bolts is difficult, and should have a prop to allow you to gently move it into position. Second the bolts are a one-chance to install and if you accidentally push into the supporting frame you are out of luck, and not likely to be able to fish them out to try again. I now have three sets of bolts ringing round in my frame. Third, the muffler is a bear to remove and has FIVE mounts in the 2019 Subaru crosstrek, not three. And it too needs to be supported while you and the three other guys helping you hold up the rest.
But once installed, it’s a good hitch. Whew.
by: William 10/05/2022
Fit well, install was pretty straight forward. Has worked flawlessly thus far. Paying the huge premium just for the ability to remove the receiver when not in use was kind of painful, but glad I did as the car looks so much better without being able to see the tow apparatus when we're not using it most of the time.
by: Allan08/23/2018
2018 Subaru Crosstrek
Great product. Took me a couple of hours to install by myself, mostly due to some hickups along with way.
One critical installation note omitted from the instructions: file the paint out of the holes in the large rectangular washers, otherwise the bolts will not fit through. I figured this out after I'd threaded the first bolt and washer up into the frame - it was not fun getting the washer back out of the frame! The bolts need to slide easily through the washers before installation.
Another tip, for those doing solo installs. Use bricks or boards or something to get the hitch close to the mounting position (my vehicle has 8 or 9 inches of clearance, so I didn't jack it up first). Then do what you must to get it into position and _omit_ the lower washers at first - just screw the bolts in by hand. Once all the bolts are in and the hitch is fixed to your vehicle's frame, back out the bolts one-by-one and reinstall them with the washers. This just makes the lift/screw in step much easier, as your hands may be full with everything else.
by: Wai-Hong06/28/2021
Great product! However I have one question.
What is the part number for the 9/16” lock pin? in case I would like to lock the adapter.
Clayton O.
7/29/2021
Thanks for the review Wai-Hong, We dont have a locking pin for the the receiver tube opening because the bolt has to be tightened all the way down so there isnt play in the receiver tube opening.
by: Steve 07/07/2020
2018 Subaru XV Crosstrek
Very well built hitch. Installed on my 2018 Subaru Crosstrek. Easy to install after watching a YouTube video and reading the instructions. I really like how it is hidden behind the bumper when I’m not using it. I would definitely recommend this hitch.
by: Bobanian08/02/2021
2021 Subaru Crosstrek
Installation turned out to be easier than I expected, with an exception. I couldn't get two of the bolts to tighten. The bolt head inside the frame section didn't grasp the washer and turned with the nut. In the end I used a Dremel to cut a tiny slot in the threaded end of the 2 bolts to insert a flat screwdriver, and once there was enough tension I could properly torque the bolts. Considering that one issue, I still feel great about this hitch. Fishing the bolts through the frame turned out to be super easy, and this was the part that concerned me the most. The overall build quality feels really solid.
25
58
Show More Reviews
See what our Experts say about this EcoHitch Trailer Hitch
- Recommended Invisible Trailer Hitch Receiver For 2019 Subaru Crosstrek I have another option for you, but you are correct that the EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7257 you were looking at will not fit your 2019 Subaru Crosstrek as it is designed to fit a 2015-2021 Subaru WRX. Instead I recommend the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - Class III - 2" # 306-X7365 which is confirmed to fit your Crosstrek and has a removeable receiver so when not in use the receiver will be completely hidden. The...
view full answer... - EcoHitch Invisi Trailer Hitch Receiver for 2021 Subaru CrosstrekAccording to EcoHitch, the # 306-X7203 isn't a fit to for the 2021 Crosstrek, as there have been changes to the rear of of the vehicle between the 2018 model and the 2021 model that would prevent the hitch from fitting. The good news is that EcoHitch has a completely concealed hitch available for the 2021 model, part # 306-X7365. The receiver tube of the hitch is completely removable, so when the hitch isn't being used and you remove the receiver tube and the hitch will be 100% hidden...
view full answer... - Why EcoHitch is Better Than a Stealth Hitch for a 2021 Subaru Crosstrek We have quite a few installation videos for your 2021 Subaru Crosstrek but sadly none for the Stealth Hitches item # 391SUCT18T. I have a better recommendation for a hitch for your Crosstrek. This one has an installation video, will offer you the same abilities, and will save you some money. I recommend the EcoHitch Stealth Trailer Hitch Receiver item # 306-X7365. This hitch is custom fit and bolts to your Crosstrek with included hardware. This hitch has a 2" x 2" receiver which is perfect...
view full answer...
- Recommended Hitch for a 2023 Subaru Crosstrek HybridYes, there is a hitch available for your 2023 Subaru Crosstrek Hybrid. It is the EcoHitch Stealth Trailer Hitch item # 306-X7365. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because the crosstube is hidden behind the rear bumper and the 2" receiver is removable. The crosstube being concealed behind the bumper not only makes for a better look but it also helps with ground clearance. With the 2" receiver removed you won't be able to...
view full answer... - Trailer Hitch Recommendation for 2018 Subaru Crosstrek for Bike RackWhenever available I like to recommend a 2 inch hitch as they are the most common and rated the best. This means that there will be more bike racks made for it and they will be easily carried. For your 2018 Subaru Crosstrek I really like the EcoHitch part # 306-X7365 as it is a 2 inch hitch that can have the hitch tube remove when not needed so that there would be not hitch visible when you don't need it. I realize this is a pretty expensive option, so we do have the Draw Tite part # 76209...
view full answer... - Most Hidden Trailer Hitch Recommendation for 2019 Subaru CrosstrekThe most hidden trailer hitch option we have for your 2019 Subaru Crosstrek is the EcoHitch part # 306-X7365. When in use only the hitch opening hangs below the rear bumper, but when you aren't towing you can easily remove the hitch opening as it unbolts from the crosstube and you'd have a totally hidden hitch setup! I attached a picture that illustrates this as well as a link to an install video for more info too. If you need trailer wiring too the Tekonsha kit part # 118467 is what...
view full answer...
- Recommended Hitch for 2023 Subaru Crosstrek HybridFor a hitch that fits the 2023 Subaru Crosstrek Hybrid I recommend the Draw-Tite Max-Frame # 76209. This is a Class III hitch with a bolt-on installation. The etrailer # e98912 you looked at and others like it won't fit the hybrid model. The main difference here is that the Draw-Tite has a visible cross tube that you will see hanging down below the vehicle. If you would rather not see the cross tube the only option is the EcoHitch Stealth # 306-X7365. This has a completely hidden design...
view full answer... - Recommended Trailer Hitch for a 2021 Subaru Crosstek HybridYes, one of the hitches that are designed for a Subaru Crosstek also fit your 2021 Hybrid. I recommend using the EcoHitch item # 306-X7365 2" receiver, it has been confirmed to fit your hybrid model. The receiver has a 4500 lbs towing capacity and max 675 lbs tongue weight limit. The EcoHitch receiver is a no drill installation and comes with all the hardware you need. I have linked an installation video. If you are planning on towing you will also need a wiring harness item # C59236...
view full answer... - Will EcoHitch Stealth Fit with Wilco Hitchgate Solo High Clearance on a 2019 Subaru CrosstrekThank you for all of the good info! The good news is that the EcoHitch Stealth Trailer Hitch Receiver # 306-X7365 will give you that 4-1/2" of clearance from the center of the hitch pin hole towards the front of your 2019 Subaru Crosstrek. This means that you'll be able to use the Wilco Hitchgate Solo High Clearance when you're off-roading, and then remove it and the receiver of the EcoHitch for daily driving to maintain that factory look on your vehicle. Attached are some photos as well...
view full answer...
- Comparing Class III Trailer Hitch Receivers For a 2023 Subaru CrosstrekThe main differences between our class III receivers for your 2023 Subaru Crosstrek is the amount the receiver is visible. The Draw-Tite Max-Frame Trailer Hitch Receiver # 76209 is the most visible when it is installed. The cross tube along with the 2" receiver are both visible with this receiver. These can also affect your departure angle on steep driveways and on tall curbs. The cross tube does have a mounting flange to accept either a 4-Way Bracket # 18144 or 7-way Bracket # PK12711U....
view full answer... - What is Most Hidden Trailer Hitch that Fits 2022 Subaru CrosstrekThe most hidden hitch that fits your 2022 Subaru Crosstrek is the EcoHitch part # 306-X7365 which is totally hidden when not in use since the lower hitch opening is removable. When you aren't towing the hitch opening comes off of the car and you'd never know a hitch was installed or that you could tow with the vehicle.
view full answer... - Best Looking Trailer Hitch Receiver for a 2023 Subaru CrosstrekI feel the EcoHitch Stealth Trailer Hitch Receiver # 306-X7365 is the best looking for your 2023 Subaru Crosstrek. This receiver allows you to remove the 2" receiver so when not needed you will not be able to tell your vehicle has a receiver. I recommend installing the T-One Vehicle Wiring Harness # 118467 when you install the receiver. This will give you a 4-way flat connector that will fit most small trailers you might tow and can also be used with Auxiliary Lights # C53201. These lights...
view full answer... - Recommended Hitch w/ a 2" Receiver for a 2023 Subaru Crosstrek I have a great hitch for your 2023 Subaru Crosstrek that has the ability to be completely hidden when not in use. It is the EcoHitch Stealth Trailer Hitch item # 306-X7365. This hitch is perfect for bike racks and towing as the 2" x 2" receiver is completely removable. The cross-tube installs between your bumper cover and frame to be completely concealed. I have attached a picture of this hitch installed along with an installation video below. If you do ever need to tow this hitch...
view full answer...
- EcoHitch and Recommended Bike Rack for a 2018 Subaru CrosstrekI recommend going with the 2" EcoHitch # 306-X7365 which is a confirmed fit for your vehicle. It allows you to use a wider variety of ball mount options as well as accessories like a bike rack. I have attached an installation video that you can check out. The installation is identical for both trailer hitches so it is a good reference no matter which way you go. If you don't already have a bike rack then I highly recommend the Kuat NV 2.0 Base # BA22B because it combines a great look...
view full answer...
- Recommended Trailer Hitch for a 2019 Subaru CrossTrek Plug-In Hybrid (PHEV)I do have an option for you but the EcoHitch Stealth Trailer Hitch Receiver part # 306-X7365 has not yet been tested on a Plug-In Hybrid (PHEV) model therefore, I cannot confirm fit. The only trailer hitch for your 2019 Subaru Crosstrek that is a confirmed fit for the Plug-In Hybrid (PHEV) model is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76209. I have attached an install video and photo for you though not on the Plug-In Hybrid (PHEV) model.
view full answer...
- Does the EcoHitch Stealth Hitch Require a Support Strap for a 2023 Subaru Crosstrek?It does not. You will not need to use a support strap with the EcoHitch Stealth Trailer Hitch item # 306-X7365. This hitch is custom fit and bolts to your 2023 Subaru Crosstrek with included hardware. I have linked an installation video below. If you are planning on towing you will also need a wiring harness item # C56040 and a ball mount kit item # C45534. This wiring harness does not fit the hybrid models.
view full answer... - Trailer Hitches that Fit 2020 Subaru Crosstrek HybridWe have a 1-1/4 inch hitch that fits the hybrid models of the 2020 Subaru Crosstrek like with the Draw Tite part # 36644 or the totally hidden EcoHitch part # 306-X7365 but the Curt you mentioned does not fit your vehicle.
view full answer... - Totally Hidden Hitch for a 2015 Subaru ForesterFor your 2015 Subaru Forester I would recommend going with a hidden hitch like the EcoHitch part # 306-X7216 as only the hitch opening hangs below the rear bumper and the lower hitch opening is removable which means when not in use it's totally hidden. This looks the best and also helps with ground clearance. To see difference between this hitch and one that is not hidden like the etrailer # e98839 I attached two pictures.
view full answer...
- Recommended Hitch for a 2023 Subaru Crosstrek HybridTo add a hitch to your 2023 Subaru Crosstrek Hybrid, I recommend the EcoHitch Stealth Trailer Hitch item # 306-X7365. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 525 lbs tongue weight capacity, which will be more than enough to handle your bike and bike rack. I really like this hitch because the crossbar is completely concealed behind the rear bumper and the 2" receiver is all that is visible while you...
view full answer...
- Trailer Hitch Recommendation for Carrying a Bike Rack with a 2018 Subaru CrosstrekFor some reason Subaru likes to tell people that aftermarket trailer hitches will cause extra damage to their vehicle if it were in an accident and the fact of the matter is that is just not true. From what we have been told the extra material of an aftermarket hitch will actually help to give the vehicle more rigidity. Since you are wanting an OEM look I highly recommend the EcoHitch Stealth # 306-X7365 because it gives you a 2" receiver that you can remove in the event that you want your...
view full answer...
- Best Hitch for a 2021 Subaru CrosstrekThe Hitch that I recommend for your 2021 Subaru Crosstrek is the EcoHitch Stealth Trailer Hitch Receiver # 306-X7365. This hitch will fit your 2021 Subaru Crosstrek whether you have the hybrid model or do not have the hybrid model. It is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. This hitch also features a completely...
view full answer... - Difference Between Curt C13382 and EcoHitch 306-X7365 for 2022 Subaru CrosstrekThe primary differences between the EcoHitch # 306-X7365 and the Curt # C13382 Class III hitches are their appearance once they've been installed and their price. The hitch capacity is identical and the install procedure is very similar between the two. The EcoHitch features a removable receiver tube. If you can't stand the appearance of a trailer hitch once its installed, the EcoHitch would be the best choice. The majority of the Curt # C13382 hitch will be concealed behind the bumper...
view full answer...
- EcoHitch Stealth Trailer Hitch Compatibility With A 2022 Subaru Crosstrek Yes, the EcoHitch Stealth Trailer Hitch Receiver # 306-X7365 you referenced is a confirmed fit for both the Hybrid and Non-Hybrid options of the 2022 Subaru Crosstrek.
view full answer... - Parts Needed For Towing a Tear Drop Trailer With a 2022 Subaru CrosstrekYes, the EcoHitch Stealth Trailer Hitch Receiver # 306-X7365 is approved for trailer towing with your 2022 Subaru Crosstrek Limited. You will need the correct size ball mount and hitch ball for your Mypod trailer. When we installed this receiver on a 2019 Crosstrek the receiver height was measured at 15". The etrailer Ball Mount Kit # 989900 will give you 2 different height ball mounts and 2 hitch balls(1-7/8" & 2"). The T-One Vehicle Wiring Harness # 118467 will give you a 4-way flat...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Noah M
Video by:
Dustin K
Written by:
Alexander C
Test Fit:
Robert C
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
11/21/2023
I agree! I will have our customer service team reach out to you about this.