Trailer Hitches that Fit 2020 Subaru Crosstrek Hybrid

Question

Question:

Is the Curt 1 1/4inch hitch part # C12184 compatible with the 2020 Crosstrk plug-in hybrid? The product description says excluded hybrid. If not, which models are compatible for the hybrid?

asked by: Jason G

0

Expert Reply:

We have a 1-1/4 inch hitch that fits the hybrid models of the 2020 Subaru Crosstrek like with the Draw Tite part # 36644 or the totally hidden EcoHitch part # 306-X7365 but the Curt you mentioned does not fit your vehicle.

expert reply by: Jameson C

0

Answer 1

When the Thule T2 Classic TH9045 is folded up there will be 3-1/2 inches from the center of its hitch pin hole to the nearest rail. The Curt hitch part #C12184 that you referenced would allow the rack to still fold up as it's not really…

view full answer...

Answer 2

We do have trailer hitch for your 2018 Subaru Crosstek that has a 1 1/4" receiver. With the 1 1/4" receiver you can carry your bike rack without the use of an adapter. The hitch is the Curt Trailer Hitch Receiver - Custom Fit -…

view full answer...

Answer 3

There are 2 hitches available from Curt that are confirmed to fit your 2020 Subaru Crosstrek. A Class II hitch #C12184, it has a 1 1/4" receiver tube opening and is rated 350 lbs TW, and 3500 lbs GTW. A class III hitch #C13382, it has a…

view full answer...

Answer 4

If you're wanting a 2 inch hitch for your Crosstrek so you can use your existing bike rack, we have 2 options that I would recommend for you. If you don't mind The crossbar of the hitch being visible, the Draw-Tite Class III hitch,…

view full answer...

Answer 5

Class I trailer hitch receivers like #24847 have a distance of about 1-5/8 inches from the center of the hitch pin hole to the welded stop in the back of the hitch receiver tube. Class I ball mounts like #3594 normally are about 1-9/16 inches from…

view full answer...

Answer 6

Good news, we do have a few options for your 2022 Subaru CrossTrek. The first one is the etrailer Trailer Hitch Receiver #e98912 which is a class III hitch capable of towing a maximum of 3,500 pounds, and a maximum tongue weight of 350 pounds. The…

view full answer...

Answer 7

We do sell replacement install hardware for all of the hitches we offer with the part #RHK. On the product page you'd need to select the brand of hitch and enter the part number and we'll ship you out the correct hardware you'd need.

view full answer...

Answer 8

The Curt trailer hitch part #C12184 that you referenced weighs 29 lbs.

view full answer...

Answer 9

The only concealed crosstube/hidden trailer hitch options for a 2021 Subaru Crosstrek Hybrid are the EcoHitch Stealth Trailer Hitch Receiver part #306-X7365 and Stealth Hitches Hidden Rack Receiver part #391SUCT18. These options both have a concealed…

view full answer...

Answer 10

I checked with Draw-Tite and can confirm for you that the Draw-Tite Trailer Hitch #36644 you asked about will fit your 2019 Subaru Crosstrek hybrid. I attached an install video for this for you to check out as well.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Trailer Hitches that Fit 2020 Subaru Crosstrek Hybrid

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching