EcoHitch Invisi Trailer Hitch Receiver for 2021 Subaru Crosstrek

Question

Question:

Hi - Im curious if this style of hitch where its hidden behind the plastic will work with the 2021 Crosstrek? I like how this hitch sits up a little higher. I dont think the 2021 has this factory knockout panel type bumper, but Im wondering if you can just cut it out? THANKS!!!!

asked by: Patrick

1

Helpful Expert Reply:

According to EcoHitch, the # 306-X7203 isn't a fit to for the 2021 Crosstrek, as there have been changes to the rear of of the vehicle between the 2018 model and the 2021 model that would prevent the hitch from fitting.

The good news is that EcoHitch has a completely concealed hitch available for the 2021 model, part # 306-X7365. The receiver tube of the hitch is completely removable, so when the hitch isn't being used and you remove the receiver tube and the hitch will be 100% hidden behind the bumper without needing to cut up your existing bumper cover.

You can view the install video by clicking the provided link.

expert reply by: Mike L

1

Answer 1

We have a very wide variety of ball mounts to choose from. Finding the correct one will depend on a few things though. First you will need to know the distance from the ground to the top of the inside of the trailer hitch once installed. Next, you…

view full answer...

Answer 2

For a ball mount to use with your EcoHitch #306-X7203 installed on our 2016 Subaru Crosstrek that would have it's hitch height at roughly 16-1/2 inches from the ground you'd need a rise of 8-1/2 inches roughly if the 25 inch dimension…

view full answer...

Answer 3

The EcoHitch #306-X7203 has a distance of 2-1/2" from the center of the hitch pin hole to the end of the receiver and 1/2" from the center of the hitch pin hole to the back side of the receiver tube.

view full answer...

Answer 4

The EcoHitch Stealth Trailer Hitch Receiver #306-X7365 is not a fit for your 2016 Subaru Crosstrek. You will instead want the EcoHitch Invisi Trailer Hitch Receiver #306-X7203 which will fit models with the center knock-out panel in the lower rear…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

EcoHitch Invisi Trailer Hitch Receiver for 2021 Subaru Crosstrek

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching